Now that is how an instructional video is done! Thank you, Sir!
@aquaspark5246
Жыл бұрын
This just saved me! I had to get a new chain and could not figure out how to tighten it. Thank you so much!
@user-ph3cw8zk8c
Жыл бұрын
Thank you. That was simply done. Normally I can’t stand the intros but yours was actually entertaining. Good to see you enjoying life.
@jiujitsu2000
Жыл бұрын
Glad you enjoyed it! Thank you for the visit!!
@rich10180
9 ай бұрын
Great video! It’s very simple! Be careful how tight you adjust to. A chain that’s too tight can snap and do hundreds of dollars of damage. Leave a little slack…
@dagsadventures3524
2 ай бұрын
Great video! Thank your for explaining. I got intimidated watching other videos where they have lifted it up and removed the tires but this was very good and informative. Im not gonna lie though, I giggled at 5:32
@johngaarsoe3259
Жыл бұрын
Thank you so much! I threw a chain last weekend due to it being too loose, and I thought I was going to have to buy a new chain. (I thought the chain was stretched/worn out.) Fixing this will be much easier than I thought.
@sergiodominguez6105
3 жыл бұрын
Thanks for the video. Very descriptive and easy to understand 👍🏼👍🏼
@HomesteadOnThePreserve
Жыл бұрын
WOW THANK YOU! I had no idea it was that easy and my 2005 Trail Boss 330 chain has been bugging me for a while. You rock man!
@jiujitsu2000
Жыл бұрын
Thank you so much!
@willcarpenter1696
Жыл бұрын
THis is the only video that actually worked.
@mikewest712
7 жыл бұрын
Gotta be the first makita/Polaris guy. Love you videos.
@jiujitsu2000
7 жыл бұрын
Mike West Thank you!
@connor3288
4 жыл бұрын
Follow service manual! On any atv or motorcycle with a swingarm/solid axle setup, the suspension needs to be compressed with a ratchet strap until the rear sprocket aligns with the front sprocket and swingarm pivot point, this is geometrically the location where the chain will tightest. Take a stiff straight object such as a very long screwdriver and make sure the centerlines of those 3 points match up. If the chain tension is set at the wrong swingarm angle, you could break the chain and potentially it blows your engine cases, sprockets, have brutal bottoming of rear suspension when chain goes tight. Its probably more common people adjust it too tight, but if its too loose thats very bad also, you could throw it off, maybe break engine cases, could damage sprockets, hopefully not your foot!
@terrykintz7756
4 жыл бұрын
Wish my son would have read your comment as I told him to - chain broke sad
@marcslayer9444
Жыл бұрын
That’s right homie. That’s more important then the whole video
@robhall9875
4 жыл бұрын
Worked for my 1998 Polaris Sport 400 - THANKS!!!
@Paolo-hx8lj
4 жыл бұрын
saved me from buying a new chain, great tutorial!
@rogergopher7518
4 жыл бұрын
Alot of help my first time having a quad and focusing it thanks
@matthewmayfield1297
4 жыл бұрын
Alot of help. Just did mine in 10 mins
@smokeylabo8736
5 жыл бұрын
You should have somebody sitting on the wheeler while you are doing this because your body weight will cause the chain to tighten, otherwise you will get it too tight.
@mayapadilla3858
4 жыл бұрын
It was very very helpful Appretiate u man
@rcxld69996
8 ай бұрын
Thank you, this helped me a lot
@mikehoague5257
2 жыл бұрын
Thank you! It help me a lot.
@unsaltedlife5998
6 жыл бұрын
Thanks nice video, and I thought I would have to take a link out of the chain.
@rooseveltarmstrong4502
5 жыл бұрын
Really helpful video and only took me about 15 mins after watching your video. 03 scrambler 500
@aceautoglass44053
4 жыл бұрын
Thanks man you saved me 59$ awesome
@skiptracer8703
7 жыл бұрын
That was easier that I thought it would be. I should of realized " the maestro knows what he's talking about" take care Buddy jim
@jiujitsu2000
7 жыл бұрын
+Skip Tracer It's not as bad as I thought. Pretty simple. Thank you for stopping by!
@XxSkill4LifexX
Жыл бұрын
This helped me a lot!
@jiujitsu2000
Жыл бұрын
Thank you so much!
@CHEMA7720
2 жыл бұрын
Great video, thanks from spain
@billmcdonald9304
2 жыл бұрын
Thanls fornhabing this video it really helped my son and i it worked great wesubscribed likednand hit the notifcation button thanks again
@andyboog2010
Жыл бұрын
Good video. Thanks for the help
@puchski1
4 жыл бұрын
Thanks for making this!!
@jamesraber5397
6 жыл бұрын
Thanks man it was very helpful.
@randy4249
3 жыл бұрын
Perfect! Good Job!
@MrBlackCharizard
5 жыл бұрын
might have to try this when i get my new chain and sprocket on my 96 polaris xplorer 400
@cliffc4074
2 жыл бұрын
Perfect, thanks brotha!
@fcaligiuri100
3 жыл бұрын
Great video... THANKS
@ernestfield8475
3 жыл бұрын
Thanks I like that video a lot
@kennethbernerlohne8023
4 жыл бұрын
Thank you so much for good instructions. The chain on my Scrambler 4x4 500 just broke off. Are there any of you who can help me with a web link to the right chain. I live in Norway and we do not have many Polaris dealers in the area, so I am thinking of buying online. Thanks in advance.
@davejillspiker481
4 жыл бұрын
Nice video. I'll try it. Just picked up a old 425 Magnum in great condition, but I drove over a small 4' pine and the chain rolled off. Easily put back on because it was so loose. Now need to tighten! Will try your advice. Thanks again!
@charleshoward9983
7 жыл бұрын
Good job there.
@jiujitsu2000
7 жыл бұрын
charles howard Thank you!
@charlesbennett4472
2 жыл бұрын
Thank you thank you very much
@bradjenkins932
6 жыл бұрын
Chain is way too tight when you seat on it.
@Parayeet15977
2 жыл бұрын
Thanks bro my chain kept slipping when I accelerate worked fine on my scrambler 500
@taylorharbaugh6341
3 жыл бұрын
I don't have a pipe wrench
@rhioh1
4 жыл бұрын
Great info. Thx
@ronaldoleksy8264
Жыл бұрын
I ave actually made a wrench out of hardwood just the correct size to fit the axle. Hopefully you are using a Snap -On ratchet .love great tools
@TheOctane24
5 жыл бұрын
When i try to tighten with the pipe wrench it just moves my whole quad like the shock moves and it wont tighten the chain. Any thoughts??
@thatsnotatraxxas5230
2 жыл бұрын
You might need a new chain could be that you're maxed out already on the adjustment
@frankiemedina4258
3 ай бұрын
Would it be a good idea to grease that zert while we are there ? Or is it unnecessary? Thanks for the vid
@jiujitsu2000
3 ай бұрын
absolutely! thank you as well!!
@GeboNC
7 ай бұрын
Brother, i have a 99 scrambler 500 and i replaced front calipers/pads/rotors, rear pads, rear axle and bearings and orings and seals and chain and sprocket and i adjusted chain. Drove it 18 miles and at 35 mph it felt like someone pulled the damn breaks. I pulled belt cover and belt was out of spec. Replaced it and pulled primary and cleaned it all up and now it squeels when i turn handlebars and or at idle which it also keeps movingg forward. Then i pulled breaks and it really squealed and ass end was all bound up. Jacked rear up and in N i could spin axle almost all the way one rotation but then it binds up again. Any ideas man? Sons xmas gift and so i have a sad 9 yr old.
@jasonwilliams9663
7 жыл бұрын
Excellent.... I was hoping to see some sweet mud bog videos.. lol
@jiujitsu2000
7 жыл бұрын
Jason Williams lol. I miss booked so much and got my Scrambler so we that my cooling fan and lights don't work anymore. Ha ha ha... Time to do some electrical troubleshooting
@jasonwilliams9663
7 жыл бұрын
JIUJITSU2000 I had the same issue with my sportsman 500. The electronic switch went bad for the fan, so I spliced in a manual toggle switch and it works great.
@jiujitsu2000
7 жыл бұрын
Jason Williams I might end up doing that. Ha ha. Thanks!
@robertelizondo2946
5 жыл бұрын
Thank you!
@ericric5181
3 жыл бұрын
Thank you
@Stephen-ie7uq
3 жыл бұрын
Help. I'm new to ATVs. I have a 93 polaris 250. My chain was so slack that I thought to remove a link. That part was fine. Problem now is that it's too short. Even if the other link was still in it the gap is too big. I'm trying to tighten up the axle housing so the chain will fit but it won't swivel. I've hit it with a penetrant and will try in an hour. Any other ideas?
@jiujitsu2000
3 жыл бұрын
Sounds like you're doing everything right. I would recommend being patient and letting the penetrating will have plenty of time soaking man eventually I think you'll be able to loosen the chain
@Stephen-ie7uq
3 жыл бұрын
Everything worked out. Thanks man.
@haydenjewell5994
4 жыл бұрын
Thanks
@comptongokartracing3426
5 жыл бұрын
That chain is way to tight
@ofeliaarellano5277
2 жыл бұрын
Good
@beardedseabee82outdoors13
7 жыл бұрын
Hmmm, I wonder what jiujitsue was up to all weekend.. lol, If I had to guess, tearin it up in the wheelers lol
@jiujitsu2000
7 жыл бұрын
Ha ha. Yup!
@robertksaye9484
5 жыл бұрын
Hey do you still have this scrambler ??
@buckwearoutdoors9595
5 жыл бұрын
Tighten deez nuts back up 5:35 😂😂
@jarodharrison5583
6 жыл бұрын
Does your scrambler bogg out alot mine started 4 months ago I can't figure out what it is
@PRODIGY123100
3 жыл бұрын
clean your carb
@coltonbocock2586
5 жыл бұрын
Wont work for my Polaris Trail Boss 325! It just wont tighten!!Anyone know how to fix this?
@stallionranchwoodworks
5 жыл бұрын
It does on mine, I have a 2002 Trail Boss 325 and this worked just fine.
@LaidBackLando
2 жыл бұрын
It’s so hard to loosen thabks tho
@jonathanhoward9307
6 жыл бұрын
Do you keep it in forward or neutral and do you keep the break on
@haydenwilliams2771
5 жыл бұрын
Probably neutral if the chain is rotating
@ndn2589
Жыл бұрын
For tools you forgot the 24 pack and a 8ball of powder
Пікірлер: 81