Thank you for confirming my thoughts on the matter poor old girl had about 1½inches of play making me look drunk going down the highway. Nice and tight now
@DaleReynolds
7 жыл бұрын
Great video sir! Will definitely try this on my Jeep! Thank you for taking the time to make and post this video!
@desanti_offroad6876
7 жыл бұрын
that bumpers fresh👌👀
@rockymountboy
Жыл бұрын
Worked for me. Don't tighten too much!
@BuiltByRik
6 жыл бұрын
It's on the wrong side 😂😂😂😂😂😂😂. Good stuff I shared on my Facebook 👍
@davidgillettuk9638
4 жыл бұрын
Aussie Jeep Muscle I said exactly the same thing to Barricade Garage when he did a steering box swap. ZGs are just another foreign language to our US friends.
@paizley9666
4 жыл бұрын
NOBODY DO THIS MAKE SURE TO HOLD TENSION ON YOUR ADJUSTMENT ALLEN OTHERWISE YOULL OVER ADJUST
@hawaiiknifeandgear5531
5 жыл бұрын
Super helpful, you just earned yourself a subscriber
@Amarillobymorning777
4 жыл бұрын
That front bumper lRocks. Greetings from Toluca Mexico.
@MustAccord
5 жыл бұрын
Also, if you thighten it too much. The steering wheel will have feedback of each bump you run over. I had to loosen mine a tad, to have slight play. Otherwise was a bit uncomfortable to drive when the steering wheen moves with each bump.
@kevinparrish4968
4 жыл бұрын
Dude. This video saved my day. Thank you!
@BuiltByRik
6 жыл бұрын
Good you tested it as it is possible if the box is over worn out it can lock up the box on a full turn. Had that experience myself in a different brand vehicle very scary.
@user-se8ds8zo4m
2 жыл бұрын
Your content is so touching
@simonfoote3097
2 жыл бұрын
Cheers mate, very helpful as mine has a fair bit of slack. How about a video on how to change the steering damper.
@tomantg
7 жыл бұрын
Nice vids man! This tip was really worth for me, now i have really tight steering in my WJ ;) thanks! And sorry for my english ;)
@nathanoller4921
7 жыл бұрын
Very informative stuff man. Thanks for sharing! I'll have to see if this helps with my steering slack. This is nate btw.
@manirajapalanichamy7331
2 жыл бұрын
so touching for an excellent video
@scooteroo
6 жыл бұрын
What size Allen wrench?
@gdecol3762
5 жыл бұрын
Good video. But, as with just about every similar one I've seen (all USA ones), the lock-nut turns the same way as every nut i.e. anti-clockwise to loosen. Having trashed my steering box doing this, I found that on my XJ the lock-nut is the opposite way, i.e. clockwise to loosen! Maybe it's because it's a right-hand drive car, although I cant see how that makes any difference to a locknut, or because it's a European spec or something. No idea how to tell until you either do your adjustment or break something.!!
@Asumara9
7 жыл бұрын
thats a nifty keychain you got there
@carsenoden7420
7 жыл бұрын
Good video really like watching these!
@TommyHerronyes
5 жыл бұрын
Omg I love you so much
@NeverOctober_
6 жыл бұрын
Where did you get that front grill? My inserts are broke on about three of them... Can't find inserts anywhere so might as well just replace the grill
@UnSociableOne
5 жыл бұрын
Just from 12 oclock to 2 oclock fixed my wandering.
@jesusrperezd
2 жыл бұрын
Hi, can you describe please the problem you had? I have a binding or clank sound in tight turns when it is on 4x4, I replaced and checked almost all in the power train
@kevinulett5276
5 жыл бұрын
Nice video dude. Thanks
@stewardmiddleton2756
4 жыл бұрын
Nice bumper dude..
@stewardmiddleton2756
4 жыл бұрын
Where did you get the bumper?
@stellito007
2 жыл бұрын
thx Bro
@redacted8846
4 жыл бұрын
Can this help with death wobble?
@silvius1686
4 жыл бұрын
What size is that Allen key? 5 mm is too big
@nickhastings6465
5 жыл бұрын
Will this work on an XJ 91 4x4?
@poundermonster
4 жыл бұрын
Question, my steering wheel has 2 inches of play. Steering was loose, did what you said. Now is nice and tight, still has 2 inches of play though, You think is time to replace gear box?
@Rubicon14
5 жыл бұрын
Gear wrench
@jonathanryan2915
5 жыл бұрын
Just like the old GM steering boxes
@maxst2
6 жыл бұрын
Ah ha... thank you. Hopefully this is cause of my wj's issue.
@khangbao7456
2 жыл бұрын
how did you do it can you share with me , thank you
@tobytollefsen8802
3 жыл бұрын
So EZ. Thank you.
@smokey2dopeee96
3 жыл бұрын
Thank you for this. What year is your wj.
@DytliefMoller
Жыл бұрын
@ckcmcr12788
3 жыл бұрын
Where u get that bumper ???
@joefrank5185
3 жыл бұрын
What bumper and lights do you have on it?
@667mjx
6 жыл бұрын
help! I change the joint balls, all tie rod ends and rubber parts of de sway bar in my jeep grand cherockee WJ (3.1 td european version). I buy a afetermarket parts on the net and the result is terrifying. The steering became havy, i cant keep the car in a strait line, the steering don t return to the central position by him self... The parts look ok, don t have any gap. Could be a steering tighten problem? or should i replace all the parts to original parts to resolve the problems? Thanks!
@dxrxxk
5 жыл бұрын
im in the same damn boat
@jfish9014
5 жыл бұрын
Even after an alignment?
@j.m.967
2 жыл бұрын
Return wheel it is low angle caster problem, lifted jeeps all does you have to corrct caster to more positiv angle.
@jedidias7091
4 жыл бұрын
Does it need to be on Jack stand to do this??
@bladerunner2434
4 жыл бұрын
I know others have done this mode and a few months later had to replace entire gearbox due to failure.
@junker1111111
3 жыл бұрын
That's what happened to me. Not sure this is a good thing to do. The steering wheel play on my vehicle appears to be in the column somehwere running from the steering box to the steering wheel.
@pitbullforge
3 жыл бұрын
@@junker1111111 possibly steering linkage? Cuz I was about to do this tomorrow. But if its not a good idea. Im gunna check the linkage
@junker1111111
3 жыл бұрын
@@pitbullforge The play in the steering appears to be in the intermediate steering shaft. That's the part that connects the steering column to the steering gear. I've had someone turn the steering wheel slightly and that movement does not reach the steering gear box. Somewhere in the intermediate shaft u-joints or the telescoping shaft the movement of the steering wheel is lost causing the steering wheel to move right and left without the wheels turning. I read where another replaced the inter. shaft and the play was gone. Tightening the steering gear screw puts a lot of pressure on the parts internally and mine failed within a few months of making this adjustement. Hope this info helps.
@pitbullforge
3 жыл бұрын
@@junker1111111 I'm sure ill make use of it friend. Thank you
@rangerdanger766
4 жыл бұрын
lost your target adjustment when u tightened locknut
@kickinwinghotboi883
4 жыл бұрын
Should've kept the allen wrench on there. I work on hydraulic heavy machinery and the lock valves, flow control valves, etc.. are the same setup and you HAVE to keep the allen in there otherwise you'll mess up your adjustment and on that equipment, the slightest turn will throw everything out of adjustment I work on aircraft loaders and aircraft pushback tractors
@rggt6225
6 жыл бұрын
I'm going to try this before I buy the box my jeep has 268k and still runs like new
@Gonzo.S.Thompson
5 жыл бұрын
What engine do you have?
@TCG_Jay
5 жыл бұрын
How did it go
@DakotaJaegle
4 жыл бұрын
RG GT 4.7 most likely
@farerse
6 жыл бұрын
thanks, will this fix sloppy steering where you constantly have to adjust the steering even when going straight
@bladerunner2434
5 жыл бұрын
Replace Trac bar first.
@tr4415
6 жыл бұрын
When I watched ...... when you re-tightened .... the allen turned along with the lock nut.... I watched closely... I thought .... I'll bet you're supposed to hold the allen where you just set it .... so I looked around on here a bit more ... "Bleepin Jeep" shows this same fix and he does hold the allen still when he re-tightens the lock down ....fyi...
@adams4x488
6 жыл бұрын
T R it didn't turn
@ryanoestriech
6 жыл бұрын
You see more threads showing from the top of the nut is all.
@tom3holer
6 жыл бұрын
Actually it did turn quite a bit and yes you should have the allen key in when tightening the lock nut.
@alexandergovoni1809
7 жыл бұрын
any advice on how to tighten the steering if the hole for the key is stripped out
@austenmoore2059
6 жыл бұрын
Alexander Govoni mine is stripped as well
@mariorotundo9167
6 жыл бұрын
Alexander Govoni get a slight bigger torks and Tapp it with a hammer. Don't go crazy with it, and you should be able to adjust it. Hope it helps
@dregram7638
3 жыл бұрын
Does this stop the death wobble?
@diekatzefliegt
3 жыл бұрын
I'm gonna say no, but good luck man
@Agent_Gaffney
5 жыл бұрын
You said 16mm nut but your wrench is a 14mm?
@adams4x488
5 жыл бұрын
:2:01 look at the left number. Its a 16. The right one is a bad stamp. They were just shitty harbor freight wrenches
@Agent_Gaffney
5 жыл бұрын
@@adams4x488 ahhh, gotcha. I was going to try this out with my WJ and just wanted to make sure that I had the correct wrench. Thank you for the tutorial and have a great day!
@Adam-jx7eq
5 жыл бұрын
Great video , will this take shake out of steering wheel ? Did alot of front end suspension work . Also pulls to right since work done ??
@markrhomberg5902
6 жыл бұрын
Has anybody tried Rusty's solid plastic replacement for the link rod end? It seemed like a good idea, taking out the twisting action on the steering link that occurs in these systems?
@danieljuza1555
2 жыл бұрын
「動画の音が良くない」、
@Don-kr5tp
5 жыл бұрын
It does not "tighten" the steering. It makes the assist less or stronger. I feel that a higher assist from the pump is a bit better and makes driving smoother. JMHO
Пікірлер: 76