Part six of in my 'Beginner's Guide' series is focused on trimming. I discuss the differences between turning tools, how to hold them, different ways of attaching pots down to turn them and various other tips, tricks and methodologies.
HOW TO TAP CENTRE: • How to Tap Center Pots...
If you'd like to watch the other parts of this series, which demonstrate how to make a pot, you can find them here:
Part 1: How to centre the clay: • How to Center Clay - A...
Part 2: How to open up and form the base: • How to Open Up Centred...
Part 3: How to pull up the walls: • How to Pull Up The Wal...
Part 4: How to lift pots off the wheel: • How to Lift Pots Off t...
Part 5: How to throw a bowl: • How to Throw a Pottery...
My how to wedge clay video: • How to Spiral Wedge Clay
The spinner I use is made by Richard Carter: / richardcarter6952 , if you DM him he'll sell you one! (I'm not sponsored in anyway to advertise his tools, you guys just ask so much it's worth putting it here).
Timecodes:
0:00 - Introduction
0:22 - Which trimming tool is best?
2:20 - How to hold trimming tools!
3:53 - Attaching the pot to the wheel, (1st way)
4:29 - Attaching the pot to the wheel, (2nd way)
5:25 - Attaching the pot to the wheel, (3rd way)
7:55 - Fixing a wobbly rim
10:05 - Trimming the base of a pot, (1st way)
11:23 - Discussing the bevelled edge around the base
11:54 - Trimming the base of a pot, (2nd way)
12:53 - Cross sections of trimmed pots
14:11 - What happens if you trim too thin?
14:42 - What happens if you trim too soft?
•
Find out much more via the link below!
linktr.ee/floriangadsby
•
Get in touch here: www.floriangadsby.com/contact
Sign up to my newsletter here: www.floriangadsby.com/newsletter
Негізгі бет Тәжірибелік нұсқаулар және стиль How to Trim Pots - Tips and Tricks - A Beginner's Guide
Пікірлер: 110