Check out www.forum.atvxperience.com/ for technical help!
@aliathman8755
2 жыл бұрын
mine shows CS_906W_TX_3D_V1.3, I tried upgrading using your video link with SD CARD but unfortunately it doesn't boot up anymore, because when i was pressing reset with a pin, i flipped and i wanted to repeat the process from a fresh. but now i messed up kindly assist
@cavernoodle
2 жыл бұрын
@@aliathman8755 You'll have to buy a USB A to A cable and follow the guide from 2:47
@alejandrocastellanos6234
3 жыл бұрын
So many thanks pal! Finally I could figure out how to dissamble a TX9 TV box!!! Thanks again!!!
@cavernoodle
3 жыл бұрын
No problem. Happy to help someone else out!
@dumanncii
11 ай бұрын
Hello I have v1.2 how can I short-circuit it when installing the software? Thanks for help. translate to Turkish
@skelllzar
Ай бұрын
I'm stuck on the "Upgrading" screen (SD card method) Any help ?
@ibrahimyamankafa5730
4 ай бұрын
You are awesome so thx from Turkey Sd card method works for me
@e-news6769
7 ай бұрын
thanks for sharing tx3 mini v1.3 firmware...
@hassankhan9795
Жыл бұрын
Thanks. I have unbricked my m9c max . The pins need to be short without the use of power supply.
@shahulvkhameed
3 жыл бұрын
OMG!!!!!!!!!!!!!!!!! it worked...!!!! Hurrayyyyyyyyyy....my 'brick" is unbricked!!!!!
@cavernoodle
3 жыл бұрын
Glad it helped you out!
@Surbana2
2 жыл бұрын
@@cavernoodle do u know how to unbrick T9 Tv box? Appreciate yr video..
@denial7673
3 жыл бұрын
For V1.6 board i am not clear about shorting points , as you show in figure there are 4 points included two resistors. So i am confused and not sure to shorting resistors.Please help .
@cavernoodle
3 жыл бұрын
You should try each set, individually, of metal contact points in the red circle, except for the transistors.
@davarizu2831
2 жыл бұрын
Than you! Very helpful.
@micro04thai27
3 жыл бұрын
Big thank you bro.
@cavernoodle
2 жыл бұрын
Yep, no problem.
@TanvirAhmed-pz5dc
Жыл бұрын
my tx3 mini is a fake one with a blue motherboard. Previously it was on boot loop but after installing the firmware from sd card it got bricked. What can i do now? Please help.
@saadalkhamis1271
3 жыл бұрын
Hi : I did download by mastic a wrong software in my ( TX3 mini -A ) after that the device died. Nothing work even there is no screen light and not work anymore.i trying to downloading the real topicals software throw the computer using the( USB burning tool ) not connect and nothing change . Only red light in the back . Now what can I do with it . Can you help me for this problem . Thank you so much.
@cavernoodle
3 жыл бұрын
To get this straight, you installed the wrong ROM on it and it bricked out on you. Lets try this out. Watch through 0:43 to disassemble the box. After you do that, determine your revision 1:57 (if its 1.0 to 1.2 then 3:41 for short pins) (if its 1.3 then its 3:35 for short pins).So take your USB A to A cable, the power supply of the unit, a screwdriver or tweezers, and the proper version of USB Burning Tool (look at this: forum.atvxperience.com/viewtopic.php?p=9944#p9944). Once you have that sorted, get the rom (ATVX or the OG) downloaded and loaded onto the UBT( 3:14 ). Go ahead and follow from 3:53. Thanks for commenting!
@CarlosGavidia-jd5pp
7 ай бұрын
Buenas noches cuento con la versión CS_905W_TX_3D_V1.4 quisiera saber si el mismo software de la versión V1.3 es compatible? Sino lo es donde podría ubicarla? Muchas gracias
@sourendranathghosh599
Жыл бұрын
Sir I have updated firmwate when it was stuck on logo after update it is agin facing same problem, what to do now sir please help
@DomingosAlvesMagalhaes
Жыл бұрын
Hello friend, I'm looking for information related to my tvbox TX3mini-A, with Amlogic S905W processor and the following information appears on the card: B00-MX3mini-REV 1.2. Can you help me? Oh, and it doesn't have the internal reset button, where to jam!?
@dragandragan6469
3 жыл бұрын
When no showing boot on display (nothing on display) , that means its completely knackered. Board is red color, ver CS_905W_TX_V1.2 20170925 Only red light of some kind comes from the back of the device. Thanx
@cavernoodle
3 жыл бұрын
For those, only the original ROM works. I think you still are able to unbrick it via UBT. Watch through 2:46, and end at 4:22. You will need to get a USB a to a cable off of Amazon for like 4 dollars, but you will have a good rate of success. If you need any more help, reply back. Thanks for commenting!
@dragandragan6469
3 жыл бұрын
@@cavernoodle Hello mate, thanx for reply, any chance you might have or know where to download original stock ROM for it, because all i can find is OTA version of android 7.1.2, nowhere to find in .img file. Much appreciated your reply and your time.
@cavernoodle
3 жыл бұрын
@@dragandragan6469 Hey! Sure, I can link you a file. mega.nz/file/LQVy3LpR#g0WHrl4SRbMbTC2jpOKtF0PGRBTxreeOg64vtQubhuU is the OG rom. If you want an AndroidTV Experience, then try mega.nz/folder/GEpQmQhZ#ezNEXQdnyNIhm2axjnfTIg/file/2IYzQShJ for non-1.3, and I'll link 1.3 version as soon as possible (1:53 for revision help). Be sure to look at description for updated links.
@dragandragan6469
3 жыл бұрын
@@cavernoodle Mate, thank you for uploading OS. Will let you know of outcome in the morning, around 6 hours from now. Cheers again.
@dragandragan6469
3 жыл бұрын
No luck mate, tried all three methods, in the first one using UBT get message constantly [2020-10-30 08:20:00 464][HUB1-1][0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed One with SD card, nothing happened, third one definitely.
@azlio1988
3 жыл бұрын
Hi bro... If i get error uboot/get results/diskinitial error What should i do?
@cavernoodle
3 жыл бұрын
Depends, but usually it means that you are trying to install incompatible software to the target device.
@winnermaga
Жыл бұрын
I have a revision of the board 1.0, please tell me who knows where to find the closure point to restore
@eduardoacevedo9993
3 жыл бұрын
Hola.. A este box se puede conectar un adaptador bluetooth V5.0
@cavernoodle
3 жыл бұрын
The later revisions do support bluetooth 5, I think. How would you add bluetooth to a tv box? 🤔
@eduardoacevedo9993
3 жыл бұрын
Ok.. Alguna ROM que sea compatible para instalar que lo utilicen
@cavernoodle
3 жыл бұрын
@@eduardoacevedo9993 I think it really depends on the hardware, as the later revisions support bt 5. You cannot enable something in software unless the hardware exists for it (Bluetooth emulation isn't a thing).
@pogledajmojpredmet
2 жыл бұрын
Just once flesh sucesufull, after that error: cannot erase bootloader? please help
@aminebadri2849
2 жыл бұрын
I have the red motherboard and i been installing all roms on it , there is a way to short pin that motherboard too. I hope this comment was helpful
@cavernoodle
2 жыл бұрын
The video was made a while back when red boards didn't have the functionality for installing roms, but its good to hear that that has changed.
@aminebadri2849
2 жыл бұрын
@@cavernoodle idk why they say its not original board but for me i was changing roms since like 2017 always using atvx way back for years . I think its just problem of drivers but i basically installed every rom out there
@cavernoodle
2 жыл бұрын
@@aminebadri2849 I believe there are limitations to installing custom roms on red board tv boxes
@aminebadri2849
2 жыл бұрын
@@cavernoodle nope no limit as long as it say this rom for tanix tx3 ,i can install it .
@redowan99
Жыл бұрын
@@aminebadri2849 Can you tell me which pin to short, i also have red motherboard
@musflickdesigning
3 жыл бұрын
I'm facing a WiFi disconnecting problem in my TX3 Mini. If you make a video on it, it'll be so greatful to me :)
@cavernoodle
3 жыл бұрын
I think I remember a forum thread about that. Did you install atvXperience onto it?
@musflickdesigning
3 жыл бұрын
@@cavernoodle No, I did nothing. After purchasing the TX3 mini, I just plugged it and stated to play. I don't know how to actually get started with the android box perfectly. So if you give me some directions how to get started after buying this product, it'll be so great full :)
@cavernoodle
3 жыл бұрын
@@musflickdesigning If you have a compatible TX3 Mini, a usb male to male cable, and some time, then you could install atvX v4, which might solve your problems. Watch the video to see if you have a 1.2 or older board, as those 1.3 ones don't work with v4 (atvX has an older version though for that). Thanks for asking!
@aga2002
2 жыл бұрын
i have a tx6 and it boots into recovery mode by default, doing factory reset/cache reset does nothing. It goes back to recovery mode.
@cavernoodle
2 жыл бұрын
Better to go the USB method then to flash the stock firmware.
@raselkhandakar50
3 жыл бұрын
My TX3 Mini Run perfectly but video doesn't Displayed on my TV. I change several HDMI cable & try 2/3 TVs. I flash stock rom successfully but result is same. this situation what should i do.. please help me out !!!!
@cavernoodle
3 жыл бұрын
The box might have been bricked and not flashed correctly, or one of the pins may have broken, or possibly, it just became defective. You should try the composite video out with a capable TV and one of these: www.amazon.com/HDE-Triple-Composite-Splitter-Adapter/dp/B00CIC9KW2
@SquadHelper
3 жыл бұрын
In my box i could not go to recovery menu by following all stpes
@cavernoodle
3 жыл бұрын
It may be because of different firmwares/models all under the same name. Have you tried using a toothpick from the A/V port on the back? Is there a small nondescript hole on the bottom of the box as shown in 5:46?
@erop5827
2 жыл бұрын
thank you bro !!!!!!111111
@dumanncii
11 ай бұрын
V1.2 anakart için hangi atvexperince rom lütfen link paylaşın
@umarjamadar7783
3 жыл бұрын
hello sir i have installed rom but after burning successfull i plug into tv and it shows me green screen and after that my pc is not detecting usb
@cavernoodle
3 жыл бұрын
You could have installed an incompatible rom, or messed up on some step that resulted in this. It might be bricked to no return, although if you want you can message the people at forumXperience.
@rrazak74
3 жыл бұрын
My box is showing red light...is there any way I restore it ...thks
@cavernoodle
3 жыл бұрын
Can you clarify when you mean "red light"? Like where is this red light? If possible, try to link an image of the issue.
@moregame2467
3 жыл бұрын
@@cavernoodle Me too, the red light is on the SPDIF connector
@moregame2467
3 жыл бұрын
I am waiting for a response from the warranty, so I haven't handled it yet
@cavernoodle
3 жыл бұрын
@@moregame2467 Oh yeah, that light doesn't mean much except that it has power. Even if it doesnt show the boot text at front, you should be able to reset it either way given you follow the instructions VERY carefully. If it doesn't work via micro SD card, then try it with the USB Burning tool.
@moregame2467
3 жыл бұрын
@@cavernoodle i need help, i decided to use USB burning tool, after done i plug in power and hdmi cable to tv box it just shows green
@dumanncii
11 ай бұрын
V1.2 anakart var kısa pin nasıl yapılır resimli tarifi lütfen
@ansouklein5438
3 жыл бұрын
I tried to unbrick it with toothpick but it stays on boot and later go to clock
@cavernoodle
3 жыл бұрын
You have to update it via SD Card or USB burning tool in order to unbrick it in most scenarios.
@jay0624ar
2 жыл бұрын
Good day, can i have a link for an IMG of V 1.3? The link you have given is not available now. thnx.
@cavernoodle
2 жыл бұрын
The link went broken a while ago, just use the think from their website: www.tanix-box.com/download-view/tanix-tx3-mini-firmware-full-image-20170829/
@OruamAF
4 жыл бұрын
Hi. I was following your tutorial but only when i disassembled the box and check the board (blue), i realised that i've got a diferent box. My is a tx3 mini-L... My version is a ""CS_905W_MiniWQ_2C_V1.2". Do you know what are the pins that i need to short?
@cavernoodle
4 жыл бұрын
The 1.2 shorts should be at 3:40, thanks for your question!
@OruamAF
4 жыл бұрын
@@cavernoodle thanks for your reply. My box is different of yours, is a mini version a bilieve.. I do not have any chip near the information of the box version =/..
@cavernoodle
4 жыл бұрын
@@OruamAF From what you are saying, it seems as though you need to short pins at 3:35. (You likely have a 1.3 since the NAND chip is not next to the model info, 2:23). If you have any more questions, I'm happy to help!
@richardhulshof8029
3 жыл бұрын
Hello cavemoodle i have a tanix clone the xsarius pure 4k similair to the tx3 mini . accept a other motherboard name the cs905w_tx_2c_ir_v1.0 it,s bricked iam trying to repair it for an friend of my . But i have the idea that i not the good pins short 7 and 8 also comes windows 10 with usb not recornized .Do you have info of this board or can you help me which pins i must short ? thankks in advanced
@cavernoodle
3 жыл бұрын
Thanks for using atvX forum, as they helped out more then I ever could.
@kofiannor5722
2 жыл бұрын
Hi I have a v1.4 how do I short when installing the firmware? thanks for the help.
@cavernoodle
2 жыл бұрын
You need to short the same pins that the revisions before also used. Thanks
@kofiannor5722
2 жыл бұрын
@@cavernoodle thanks for the clarification. I was wondering if you know the shorting points for a Sunville T9 RK3328 4GB RAM 32GB android tv box? Thanks again
@cavernoodle
2 жыл бұрын
@@kofiannor5722 Sorry, I do not.
@paulsep21
2 жыл бұрын
Para un T9 sabes cómo hacer unbrick
@cavernoodle
2 жыл бұрын
Try this: kzitem.info/news/bejne/xGumzZVrm3mHn2U
@adolfomaciel2259
2 жыл бұрын
Tenho tx3 mini. Na hora que estava atualizando tv box, apareceu um X com Android. Depois não ligou mais e nem sinal de vida. Placa cs_905w_tx_v1.2 . Poderia me ajudar?
@cavernoodle
2 жыл бұрын
Best to use the pin method first.
@fazlifazli2491
3 жыл бұрын
hello my board cs_905w_tx_2c_v1.1 (blue board) can give me download link for my rom? or which one rom i can use for my board? tq
@cavernoodle
3 жыл бұрын
What ROM are you looking for, like atvX(www.forum.atvxperience.com/viewtopic.php?f=2&t=2451) or the stock ROM (mega.nz/file/LQVy3LpR#g0WHrl4SRbMbTC2jpOKtF0PGRBTxreeOg64vtQubhuU)? Because it is v1.1 you have a wide range of options to choose from.
@tolgasonmez3563
2 жыл бұрын
Hi friend, my board cs_905w_tx_v1.1 blue board. Does the USB cable and power cable need to be plugged in at the same time for a short circuit? and which one rom i can use for board... Thanks
@ejonfadhli
3 жыл бұрын
Mega download for 1.6 not exist anymore... please help..
@cavernoodle
3 жыл бұрын
You mean for atvXperience? I'll get a new link once their site is up.
@adonismosquera6687
3 жыл бұрын
hola tengo una placa tx3 mini (cs_905w_tx_2c_v1.1 20180206)placa roja cual rom me recomiendan ya que he probado varias pero todas arrojan algun problema de uso y ya no puedo volver a la rom oficial ya que no esta en ningun lado .... Ayuda por favor
@cavernoodle
3 жыл бұрын
Since it is a red board and ROM compatibility is very hit or miss, I would say looking on the manufacturer's website for the original ROM or atvX, but since it's nowhere to your knowledge, and I don't have enough knowledge in this field, I could direct you to the atvXperience forums (www.forum.atvxperience.com)who might be able to help. If you could link some high res images of both sides of the board here, then it would help (like imgbb.com/). I hope I helped!
@CesarHernandezZac
3 жыл бұрын
Alguien sabe el pin corto de la Tx3 mini-a SC_912_TX_B4_V1.0 ? tengo fotos de la placa
@cavernoodle
3 жыл бұрын
You should consult the forums because I think it is s912 you are talking about. forum.atvxperience.com/
@salemyaqout3394
2 жыл бұрын
"tx3mini-a cs_905w_tx_3d_v1.3" I need to go android 8 or 9 😢 I need help plz
@cavernoodle
2 жыл бұрын
From talking with members on the forum, getting any android version higher than 7 is impossible for the 1.3 edition due to the use of nand chips that can't get newer versions of android on them.
@talha_talukder
2 жыл бұрын
Hello Brother The IMG file of TX3 Mini is not available can u give me a drive uploaded link pls
@cavernoodle
2 жыл бұрын
Should be available now
@marcelobetter
2 жыл бұрын
HAVE FIRMWARE S905X V1.2 OTTTVBOX X96 PLEASE
@cavernoodle
2 жыл бұрын
Sorry dude, I only had images for S905W. Thanks for asking though
@76557566
11 ай бұрын
0x10302001 romcode/switch status/check connect/enum device tanix mini e probamos muchas rom y emtodas ese error
I only know the S905w version of the TX3 Mini. Sorry!
@danielatellez7567
3 жыл бұрын
Hi, my tx3 mini doesn't turn on, any solution?
@cavernoodle
3 жыл бұрын
Did you watch through the ENTIRE video? I'm serious because most of the info is on there. Once you finished it all then come back.
@SquadHelper
3 жыл бұрын
can i use a pen drive instead of sd card.
@cavernoodle
3 жыл бұрын
If you are trying to get a zip file or trying to get into TWRP, then yes. Sadly Amlogic only makes ROM recovery through SD card and UBT. Thanks for asking!
@FerdausAlAmin
Жыл бұрын
Did notwork for me!
@MohammadNaddaf
2 жыл бұрын
👍👍👍👍
@Jackbarker94982
4 жыл бұрын
It deleted all my film channels how do I get into my memory recycle
@cavernoodle
4 жыл бұрын
You will probably have to reinstall them, as unbricking wipes everything.
@jingzhou5715
3 жыл бұрын
my solution. 1. hold the RESET button 2. plus the USB cable to the port on TX3mini near TF slot ( DON'T NEED PLUG 5V ADAPTOR) 3. You will see " connected" in the buring tools
@cavernoodle
3 жыл бұрын
This only works if your box isn't bricked, but I couldn't unbrick my box without the power source. TV boxes have their own minds sometimes...
@stimpsonstimpi1446
11 ай бұрын
cs_905w_tx_v1.2 red pcb someone have firmware?i think is a fake tx3 mini
@podjitsu
2 жыл бұрын
I have a tx3 that brcked and I can't make it work at all. always gives this error. 0x10303004 romcode/switch status/identify/ error result Model: TX3 CS 905 w TX 3D V1.6
@cavernoodle
2 жыл бұрын
You might be using an incorrect rom on it, try looking for TX3 Mini v1.6 roms
@exitpc
3 жыл бұрын
I used method 2 because i didnt have a usb cable....my tv box is totaly DEAD now..just saying
@cavernoodle
3 жыл бұрын
Can you describe to me what you did (like how to installed the rom to the card, what rom you used, etc.)? Also describe what you mean when you say "totaly DEAD" (like does it show a black screen on power-up, any lights that turn on). Because if you put the right ROM on a functioning SD card, and properly followed the steps to initiating recovery, then it should've worked. I had a similar experience myself trying to install with an SD card, as they can be hit or miss. If you can, try using a USB a to a cable (here's one I used: www.amazon.com/UGREEN-Transfer-Enclosures-Printers-Cameras/dp/B00P0E3954/ref=sr_1_3?dchild=1&keywords=usb+a+to+a&qid=1602958564&sr=8-3), as they have a higher success rate.
@exitpc
3 жыл бұрын
@@cavernoodle by totaly dead i mean there is no power lights now...no boot sign,no nothing...!anyway i ordered an amazon fire stick now...no hard feelings.
@cavernoodle
3 жыл бұрын
@@exitpc Alright then, thanks for commenting anyway.
@freyzeency5731
4 жыл бұрын
can it work for tx6
@cavernoodle
4 жыл бұрын
It might, you'll have to post pictures of the motherboard so I could tell.
Hi can i message u on telegram mine is bricked and the board ia diffrent plz help
@cavernoodle
4 жыл бұрын
@Abdulhadi Faris It would be a bit easier on my end if we do it over KZitem. Can you explain in detail what you see after disassembly of the unit? Like is it a red board (1:40), what revision is it (1:55), perhaps link a image if need be. Thanks for your question!
@abdulhadifaris8624
4 жыл бұрын
@@cavernoodle This is the first side ibb.co/Xzj7tx8 This is the second ibb.co/bPpxY7c I don't know which pins to short because the nand isn't the same in video
@cavernoodle
4 жыл бұрын
@@abdulhadifaris8624 The board says that its a 1.0, but the layout is nothing like 2:13, a real 1.0 board. This might be a fake, but since I don't know anything about this board, you will have to talk to the people over at forum.atvxperience.com , they have ALOT of experience in TV boxes, so they are your best bet.
@cavernoodle
3 жыл бұрын
@@abdulhadifaris8624 To narrow your search for them, tell them that it is a s912 box. I think they have a dedicated section for those boxes.
@amthones5948
Жыл бұрын
hiii bro...my tanix tx3 mini with code CS_905W_TX_3D_V1.3 20181029 is brick only red light in audio optic port, i try to flash with fw atvXperience_S905W_V2H_FINAL_TX3_NEW_REVISION.img, but alway stop in 98% process and with error message [0x30403003]UBOOT/Partition bootloader/Download buffer/Data tranfer error, do you know how to solving this error? thanks before
@melryan5723
4 ай бұрын
Try again because first time mine same like yours 98% and then I try again get 100%
@amthones5948
2 ай бұрын
bro...where is the short pin for red board cs_905w_tx_v1.2 20170925?
@jayceezhu
Жыл бұрын
I am the marketing manager of tanix tv box. I want to cooperate with you on the latest products. How can I contact you?
@NewTech7431
2 жыл бұрын
i bought tx3mini-a cs_905w_tx_3D_v1.3 . but suddenly not boot displaying tx3mini and hang on no other options. please help what should i do?
@cavernoodle
2 жыл бұрын
Have you tried to reset it with the last method?
@NewTech7431
2 жыл бұрын
@@cavernoodle what’s the last method im new
@NewTech7431
2 жыл бұрын
@@cavernoodle last night i m tring to flash it. Yes i flash it 100% succesfull burn but when i trun on tx3mini on the display no other options what should i do?? Help please Thanks for replying
@cavernoodle
2 жыл бұрын
@@NewTech7431 It should have shown an image once it's flashed, maybe some other component has also failed.
@ignaciorici1981
3 жыл бұрын
hola tengo la tx3 mini cs_905w_tx_v1.2 20170925 placa azul , cual rom recomiendan ya que he probado varias pero todas arrojan algun problema de uso y ya no puedo volver a la rom oficial ya que no esta en ningun lado .... Ayuda por favor
@cavernoodle
3 жыл бұрын
Totally here to help! In the description there is a link to the original rom for the TV Box, but I can provide it here too: mega.nz/file/LQVy3LpR#g0WHrl4SRbMbTC2jpOKtF0PGRBTxreeOg64vtQubhuU. The only good custom rom I can recommend to you is atvXperience: www.forum.atvxperience.com/viewtopic.php?f=2&t=2451. If you look around in the threads, you can find a version for 1.2 if I remember correctly. Thanks for asking!
@aldytvnet2635
3 жыл бұрын
@@cavernoodle i need this help but the forum is temporarily Unavailable
@cavernoodle
3 жыл бұрын
@@aldytvnet2635 The forum does go offline sometimes, just check often.
Пікірлер: 160