NOTE - make sure you have a micro USB Data cable and NOT a USB Charging cable. If the Fender software says that it is not recognizing the device with your cable - then the cable is most likely a charging microUSB cable - hope this helps! /// ALSO - If you are connecting/updating your LT25 for the first time. Open the firmware on your computer - then follow the fender prompts. if you get a message saying (no device connected and your usb IS connected), follow these instructions: DISCONNECT your USB - then turn the amp power on while holding down the push control knob. After you have done this, THEN plug in your USB.
@TawnyMay
Жыл бұрын
Thank you. Really. :)
@HyperX182
3 ай бұрын
It’s still not working
@michaelp8856
3 ай бұрын
@@HyperX182 i know it's a pain in the butt. i had to try a couple of tries. plugging the cable in first then turning on the power, etc. keep trying. double check that cable also . it has to be a data cable. BEST Buy sells them - if it doesn't work you can return the cable. in this day of AI and sending people to space - i'm glad Fender isn't in charge :)
@imcameronlee
3 ай бұрын
Thank you for the help!
@ahmetcorek4097
2 ай бұрын
THANK YOU SO MUCH... I WAS TRIPPIN....
@james.james.james.james.james.
3 ай бұрын
Thank you so much! This helped me a lot, as the Fender Website, and the Fender Tone App, did not tell me anything. I'm a beginner in guitar, and I didn't, and still don't, know much about my amp. You're a life saver, and once again, thank you SO SO SO much!!!
@rickd-guitar
3 ай бұрын
I’m so glad it helped. I think the LT 25 just gets lost in the background at Fender. Thanks for watching!
@arnabchakraborty7188
3 ай бұрын
@@rickd-guitardo you think it will be a good idea to but LT25 now? I am heasitating bcz the model is pretty old and the support from Fender might not be great for this product now Specially for the software part
@rickd-guitar
3 ай бұрын
@@arnabchakraborty7188 that’s a good question and prompted me to shoot a video on the subject. Short answer is yes. I don’t think it’s going away and they might shoot a firmware update in the future. It’s still pretty capable as it is now.
@rsmazz
4 ай бұрын
Awesome video, it helped me a lot. Here in Brazil, there aren’t any videos about this Fender Mustang LT25 amp, but I watched several American KZitemrs talking about it. I’m a beginner at guitar and I found this amp really efficient, thanks a lot for the video
@rickd-guitar
4 ай бұрын
I’m so glad it was helpful. It’s a great amp with some really good built in tones. Also with the app on the computer it’s easy to create your own. Thanks for watching and posting!
@Keithphotorama
10 ай бұрын
Thank you for this excellent tutorial video on how to update Firmware. Just the right pace for me to follow. This amp is gonna save me $80 in equipment that I won’t need, awesome 🤓🤘.
@rickd-guitar
10 ай бұрын
So glad it was helpful. This little amp is great!
@kornfed4110
Жыл бұрын
Whatever you do, do NOT bump the USB while it is updating. That interrupts the update rendering the amp useless. Currently have an inquiry to Fender support.
@rickd-guitar
Жыл бұрын
Man that stinks! Good tip for others.
@MAXXlS
Жыл бұрын
How did it go? did they help you out?
@michaelp8856
Жыл бұрын
I bet you could just do the restore function (hit the menu button and scroll down to "restore"
@John-uo4uc
3 ай бұрын
I could be enjoying the firmware update now except my laptop is a Chrome Book- thanks for the How To. 4:16
@rickd-guitar
3 ай бұрын
Another Fender fail. Cuz Fender tone doesn’t support Chrome’s OS. Sorry man. That stinks.
@mickaelroyet48
Жыл бұрын
cool, c'est exactement la vidéo que je chercher, merci ;-)
@dennispope8299
9 ай бұрын
Thank you so much! I love your cuckoo clock BTW!
@robertmauro5946
Жыл бұрын
thanks
@vtaro5354
Ай бұрын
Really appreciate your video. I just bought the amp and think it's great. So, once you do the update, the amp will now have all 100 presets instead of the original 30? Thanks again. Cheers.
@rickd-guitar
Ай бұрын
@@vtaro5354 The update will add an additional 30 preset slots on the amp bringing the total up to 60. You can add any of the 100 to those empty slots or create your own all done in the app. Upper left corner of the app you can switch between presets and amp.
@vtaro5354
Ай бұрын
@@rickd-guitar Thanks very much for your response and additional information. Have an awesome day and week ahead.
@rickd-guitar
Ай бұрын
You as well!
@vtaro5354
Ай бұрын
@@rickd-guitar Hi. Quick follow-up. I updated the firmware. It did NOT automatically add 30 additional presets. Am I supposed to add the ones I want into the 30 empty ones or should another 30 have been added? I'm older and a dunce with lots of this stuff. Just want to make sure I'm understanding it. Thanks, man.
@rickd-guitar
Ай бұрын
@@vtaro5354 I’m sorry that’s my bad. Yes you would add the presets that you want to those empty slots. No worries. Most of my tech knowledge comes from learning from my mistakes.
@luckyluke792
Жыл бұрын
thanks...well explained
@mr.n0noob228
Жыл бұрын
You kinda look like mike ermentraught from breaking bad
@rickd-guitar
Жыл бұрын
I can see a little resemblance.
@hungrytigers4089
Жыл бұрын
@@rickd-guitar me too
@plezer2470
6 ай бұрын
Nice
@codymyersofficial
Жыл бұрын
I bought this amp brand new this week, mostly based on the Silky Solo, Blues Lead 1, VH Brown, You Too presets. Only Silky Solo is available, the don't exist. I have no firmware update notification when hooked up to Fender Tone. Quite irritated.
@codymyersofficial
Жыл бұрын
UPDATE LOL: I had to turn the amp off WHILE it was connected to Fender Tone, and when I did that it told me there was an update.
@rickd-guitar
Жыл бұрын
@@codymyersofficial oh good. Glad you got it sorted out.
@bradleybarraza9963
Ай бұрын
Helps out a lot, thanks BUT IS THERE ANY WAY I CAN CONNECT IT TO MY PHONE SINCE I DONT HAVE A LAPTOP???
@rickd-guitar
Ай бұрын
That’s a great question. I’ve never found a micro usb to lightening connector to try with my iPhone, so haven’t. I don’t know about trying with an android phone. Anybody out there have any success?
@bradleybarraza9963
Ай бұрын
@@rickd-guitar same here with android, still looking for any answers, thanks
@alteredquellist9742
5 ай бұрын
Thanks man. Fender app wouldnt prompt me and theres no check for update button for some reason lol. Not like its 2024
@rickd-guitar
5 ай бұрын
Yeah every once in a while I go to Fender’s LT site to see if they have updated the software. Wish they would considering they just released an update for the Tone Master Pro. Our little amp just doesn’t get the love.
@VantageCollective
5 ай бұрын
If you follow these steps anyways, it forces the menu to pop up to update the firmware. Give it a try, I just did it.
@alteredquellist9742
5 ай бұрын
@@VantageCollective Thats why I said thanks..
@petermills3382
Жыл бұрын
is there away to download additional presets affect?
@rickd-guitar
Жыл бұрын
That’s a good question. I’m not sure if what we see in Fender Tone is all there is or you can get more. Or did you mean download from the computer/app to your amp?
@farmboy6441
Жыл бұрын
It wont update for me. I have the fender tone app on my pc, its windows 10, connected to amp, i turned the amp on while holding down the encoder knob, and nothing popped up for an update on my computer. I press the scan button but doesn't find the amp. Any tips?
@rickd-guitar
Жыл бұрын
I’m having the same problem with my Mac now. Not recognizing the amp at all and keeps saying it needs an update. Redownloaded fender tone and updated the computer. Haven’t had time to trouble shoot further.
@rickd-guitar
Жыл бұрын
I went out to the store and got a new cord that specified it was capable of data transfer and it is working now.
@michaelp8856
Жыл бұрын
see my message above!
@caddnwizner2942
9 ай бұрын
Can you use a looper on this amp? I have the amp and am really wondering
@rickd-guitar
9 ай бұрын
That’s a good question. I have a looper pedal and the issue I encountered is that the looper will send the signal to the amp but there no way to switch the sound. Like say a clean rhythm and then loop a lead melody with a different setting. It will just loop into whatever setting I have. Has anyone else figured a way to loop with it?
@sushiliftchannel
Ай бұрын
I bought a new micro-usb but my computer keep saying "usb device not recognized" and i dont know what to do... do you have any advise to what to do?
@rickd-guitar
Ай бұрын
@@sushiliftchannel i’ve had that happen to me as well. Even when I’m pretty sure it’s a data enabled cable. I’d hate to tell you to go out and buy another cable, but that might be the solution.
@sushiliftchannel
Ай бұрын
@@rickd-guitar Dude 😭😭✨ i literally came back from the store and got another new micro usb and IT WORKED 😭😭✨✨and now im having fun with making new preset >;3 👍✨✨
@rickd-guitar
Ай бұрын
@@sushiliftchannel so glad to hear it! I really like how Fender set up the app. It’s simple enough to use and you can get some really good tones.
@tinythaigirl
Жыл бұрын
How acoustic sound will be like if use this amp? Can you do review for me please?
@rickd-guitar
Жыл бұрын
Generally you don’t want to plug an acoustic guitar into an electric guitar amp. It will feedback pretty bad. I will try and make a video to see how this amp would work with an acoustic.
@tinythaigirl
Жыл бұрын
@@rickd-guitar Ahh thank you so much yes i really wanna know how acoustic will sound like on electric amp because the acoustic amp just soo rxpensive😄
@rickd-guitar
Жыл бұрын
@@tinythaigirl Just posted the video. Its on my channel page. Hope that helps.
@tinythaigirl
Жыл бұрын
@@rickd-guitar thank you so much i’ll check it😊
@michaelp8856
Жыл бұрын
@@tinythaigirl has a pretty decent sound - its not exactly like an acoustic but it gives you DEMINSIONS of an acoustic. the acoustic function handles strumming the electric well
@cooperdavis5093
Жыл бұрын
I'm getting a message about multiple amps being connected. I've tried unplugging my headset and microphone, but I am still getting this message. do u have any idea on how to fix this? thank you
@rickd-guitar
Жыл бұрын
That’s a new one on me. A quick google search didn’t yield anything. I’ll keep looking.
@michelaraujo183
Жыл бұрын
the sound come out of the pc speaker or the amps? can i plug the usb so the audio can come out of my headphones?
@rickd-guitar
Жыл бұрын
The sound comes out of the amp. For the the LT25 the computer can switch amp and modify the settings on the amp. Haven't tried listening to headphones from the computer. There is a headphone jack on the amp though.
@Keithphotorama
10 ай бұрын
My Data USB cable arrived and after updating the firmware all my presets were empty. Called tech support and no answer. After the update completed I noticed a white light shining bright but I shut off amp to turn it back on asking to update firmware (again). Was I supposed to wait for that white light to stop shining ?
@Keithphotorama
10 ай бұрын
Turning off my computer, removing the USB cable, and then turning on the amp all the original presets are still there. The USB cable does say data cable and when I was going through the firmware update process it did say update completed. Nothing was updated, all presets were empty. Although, I was able to see the Factory presets and play them, but when I attempted to save them to my amp it would not connect to amp. Something is wrong.
@rickd-guitar
10 ай бұрын
If there is a new firmware update out there I am now hesitant to update. I was fortunate the last one went without error. It’s disheartening to hear Fender customer service wasn’t helpful. I’ll try and research when I get home from work.
@Keithphotorama
10 ай бұрын
@@rickd-guitar This morning I looked through my drawer of cables and found another cable that actually worked without any issues. So now I am in a happy place 🤓🤘
@rickd-guitar
10 ай бұрын
Awesome to hear! Cables matter. Stumbled across this video and was shocked. kzitem.info/news/bejne/onprx3WacYGqa2ksi=CKCYaAuIxyI3aO4l I am not gonna spend $130 on a cable but it makes me rethink those Dollar Tree and cheap cable options.
@cami2882._.
6 ай бұрын
do you know how to transfer the audio from the amp into the macbook?, because when i go to my sound settings on the mac it shows "mustang lt25', but then after pressing on it it says 'the selected device has no input controls'.
@rickd-guitar
6 ай бұрын
I haven’t been able to send the signal from the amp direct to the computer. I believe the mini usb is just to control the amp. I tried using the line out into my Axe I/o but it was too weak a signal.
@cami2882._.
6 ай бұрын
@@rickd-guitar ah oki, i’ll keep trying other ways, thank u
@jamielongshaw5186
Жыл бұрын
Hello, how long does the update take? I have mine plugged in and stuck on 'Preparing' for the last 30 minutes
@rickd-guitar
Жыл бұрын
It took a while but I don’t remember it taking that long.
@julio12380
7 ай бұрын
How to download fender tone desktop?
@rickd-guitar
7 ай бұрын
Try here first if you haven’t already. www.fender.com/tone
@julio12380
7 ай бұрын
@@rickd-guitar Hello, I speak little English, it only works on PC, right? I'll try it tomorrow.
@rickd-guitar
7 ай бұрын
It works on Mac or PC. I have a Mac. Good luck.
@julio12380
7 ай бұрын
@@rickd-guitar thanks
@thetankguy9263
Жыл бұрын
mine isnt being recognised at all by my computer
@rickd-guitar
Жыл бұрын
Others have had the same issue and the first thing to try is make sure the micro USB is for data transfer. Apparently there are some cords that are charge only.
@thetankguy9263
Жыл бұрын
@@rickd-guitar oh wow okay, thank you
@rickd-guitar
Жыл бұрын
Mac or PC?
@rickd-guitar
Жыл бұрын
Hopefully this will let me post this link. It's from the Ultimate Guitar Forums. www.ultimate-guitar.com/forum/showthread.php?t=2004086
@rickd-guitar
Жыл бұрын
@@thetankguy9263 Hope that fixes the problem.
@InfernoShots23
Жыл бұрын
How good will this amp be for a epiphone lp special 2
@rickd-guitar
Жыл бұрын
I have run my LP Studio through it and am very happy with the amp.
@mdavis8814
Жыл бұрын
What is the number of that latest firmware? It's under Menu>about. Thanks
@rickd-guitar
Жыл бұрын
The one I just updated to is 2.1.4
@mdavis8814
Жыл бұрын
@@rickd-guitar Awesome 🎸.... I just bought a new one and that's what it is on already.
@rickd-guitar
Жыл бұрын
@@mdavis8814 cool! I had gotten mine a few years ago and just recently updated it. Great little Amp!
@tommytruce591
5 ай бұрын
How do I factory rest it ?
@rickd-guitar
5 ай бұрын
I haven’t done one yet but here are the instructions. Press and hold the EXIT button while turning the amplifier ON. Continue holding the EXIT button until it is no longer illuminated.
@tommytruce591
5 ай бұрын
@rickd-guitar I have the fender mustang gt200. There isn't an exit button...
@rickd-guitar
5 ай бұрын
@@tommytruce591 try going here www.vguitarforums.com/smf/index.php?topic=20910.0
Пікірлер: 110