A Great Thank to you Sir for this beautiful lecture ❤on stack switch upgrade. 💐🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏💐
@umeshgupta4987
11 ай бұрын
Thank you Sir...such a great explanation.
@Computer_Networking
9 ай бұрын
Welcome
@aquadir2830
3 жыл бұрын
Thank you very much.... It's helpful 🙏🙏
@kripasindhughosh1150
Жыл бұрын
Great one Brother
@Computer_Networking
Жыл бұрын
Thanks for the compliment
@kripasindhughosh1150
Жыл бұрын
@@Computer_Networking For installed mode no need to specify the boot image right ?
@aksel9392
Жыл бұрын
hello,thank you so much for this upload. my question is,after the #wr command, should we reload by the #reload or there is another command to realo all switches in the same time??? thank you
@Computer_Networking
Жыл бұрын
Reload to reboot all the Switches
@AbhinavSingh-xq1wt
2 жыл бұрын
So with this process, upgrade will be on all the members altogether? Or it will be one by one (like one switch came up and then other one go down)?
@Computer_Networking
2 жыл бұрын
All together -All stack members
@AbhinavSingh-xq1wt
2 жыл бұрын
@@Computer_Networking Thanks for the response. It means, we can not avoid downtime here. Right?
@Computer_Networking
2 жыл бұрын
Yes
@sonalivapilkar1085
Жыл бұрын
We see one option as Autoupgrade Enable : ? What if this option is no? Will the stack switch get upgraded automatically Along with master?
@Computer_Networking
Жыл бұрын
U have to copy image to all the flash
@sonalivapilkar1085
Жыл бұрын
@@Computer_Networking ok, thank you
@AmitSharma-vw2ic
2 жыл бұрын
can we use this method in c2960x running in stack as well?
@Computer_Networking
2 жыл бұрын
Yes
@nishantm21
Жыл бұрын
today I upgrade 2960x with this method. 😀
@jaganu2843
3 жыл бұрын
2 switches are in stack. one is in active and another is in standby
@Computer_Networking
3 жыл бұрын
Yes, U r right. 2 switches in stack , One active and one standby, If three switches in stack, One active ,standby and one member .like this.
@jaganu2843
3 жыл бұрын
how to upgrade IOS for Cisco C9300-48UXM
@Computer_Networking
3 жыл бұрын
Is this standalone or stack ?
@jaganu2843
3 жыл бұрын
@@Computer_Networking in stack
@Computer_Networking
3 жыл бұрын
Try the below 1 Copy file from ftp over to internal flash. copy ftp:/cat9k_iosxe.16.09.05.SPA.bin flash: 2 Install new software. request platform software package install switch all file flash:/cat9k_iosxe.16.09.05.SPA.bin 3 Reload to apply new software. reload 4 Clean internal flash from remnants. request platform software package clean
Пікірлер: 25