Just looked on Amazon for the metal extruder clamp and found the whole kit in your video (clamps, bed leveling springs, hose, etc) for less than $20. Now sir, that is an upgrade for a bargin!
@jacobbarton9701
Жыл бұрын
My Ender 3 has a warped bed and I have been SO frustrated trying to get any high quality prints off of it. (I'm new to this whole 3D printing thing). This was very helpful and straightforward without getting lost in the weeds of all the crazy things a lot of other people do to their Ender 3s.
@AjoAlexVarghese
4 жыл бұрын
finally a no nonsense upgrade video without any fancy stuff and straight to the point. loved it and thanks, keep doing more. cheers
@FranklyBuilt
4 жыл бұрын
I’m very glad to hear that!
@nealbaker8578
3 жыл бұрын
Keep your old bowden tubes for extrusion tests. Cut them at desired extrusion length, insert them wherever you want to take the measurement...making sure the end is up against a stable piece of the printer, make the filament, run the test, then move the tube out of the way and take a measurement from the stable piece to your mark. Economical and makes measuring filament easier. I have a 100mm section just for extrusion testing.
@Xyz.3d
9 ай бұрын
Holy shit I’m seeing this 2 years later but this is soooooo smart, thanks
@mechaform
Жыл бұрын
More great noob info. My used Ender 3 already had an upgraded metal extrusion “clamp”, bed springs and a glass plate. Bingeing your vids is helping drive me up the learning curve.
@francoisdesbiens3886
4 жыл бұрын
My used ender 3 had the extruder broken when I bought it. I just change it for the same one in this video and I'm now ready to try printing something! It is your videos that have me confidence to buy a 3d printer. You explain very well and it is all useful! Thx!
@ahaansingh9188
4 жыл бұрын
When I first heard of upgrading a printer I didn't exactly understand how beneficial it was and which ones were best, but now I do. I'm definitely going to try some of these out on my own Ender 3.
@FranklyBuilt
4 жыл бұрын
Good!
@edwinl.nievesjr.4521
4 жыл бұрын
Hey brother, exciting news, I just purchased my first 3d printer and this video is awesome! I will be doing these upgrades as well. Once again thanks for the tips. Cant wait to print out my project!
@FranklyBuilt
4 жыл бұрын
Yessss! That’s awesome man!
@saddle1940
Жыл бұрын
Thanks for the video. I've found the tube cutter that comes with the Capricorn does not cut it flat. To cut the bowden tube square, use the base of the coupler instead. Put it in the coupler and use your blade to chop it off flat at the bottom of the coupler.
@dfulford00
3 жыл бұрын
Thank you for this video. I have been having issues with my Ender 3 Pro bed for the last week or more, and watching your method of leveling with the hot bed worked like a charm. Still have some work to do on it, but at least I can print again!
@JayJacksRC
Жыл бұрын
I absolutely love this video man it might be an older one but for a Newbie Original Ender 3 owner like myself this video is perfect man! And greatly appreciated thanks for sharing bro! 😎✌️
@gettingfitat5015
4 жыл бұрын
PERFECT timing!! My metal extruder gets delivered today! ...I like that magnetic bed! I switched to glass about 6 months ago and haven't really had any issues with it...but options are great! :-)
@FranklyBuilt
4 жыл бұрын
Nice.
@fueledfuryfpv
Жыл бұрын
Great video mate, very informative. I've had my ender3 for about the same time (2 yrs) and before I had watched your video I had ordered the same metal extruder. Lol Good to know to keep the larger coupling for the metal extruder.
@MrJ5coats
Жыл бұрын
Thanks for this video. I just upgraded my extruded to an all metal after having several print failures.
@gwen436
3 жыл бұрын
I love the tool holder.
@MikeHammer1
Жыл бұрын
Ditch the bed springs. Get the silicone spacers instead. Springs allow sideways wobble and are harder to adjust.
@titanuscreature4485
Жыл бұрын
I legitimately just got my 3d printer 3 weeks ago and my biggest issure is getting the bed leveled and my sensor keeos on grinding which messes it up so thanks for reviewing this. Def gonna get upgrades
@derek750
4 жыл бұрын
Thanks I've been looking for this video! 🤙🏼
@Starwarsfan8517
10 ай бұрын
This video is fantastic everything works thanks
@TheUnknownExplorer666
Жыл бұрын
The random zip tie cut scared me lol 😂
@danonroof
11 ай бұрын
the magnet is directional...yes it will hold in any direction but it will be stronger in 2 of the positions and weaker in the other 2...and the magnet is strong enough that it will destroy your print before shifting the bed...
@HeyItsRed_
4 жыл бұрын
This is perfect! I just got one and want to upgrade it
@FranklyBuilt
4 жыл бұрын
Perfect!
@HeyItsRed_
4 жыл бұрын
@@FranklyBuilt Love your videos
@aluminumtrim
3 жыл бұрын
Very good video! I hope you’re getting some sponsorship from creality
@mysticalsoulqc
2 ай бұрын
dextile - wel done!
@stuartpollock84
3 жыл бұрын
I got my Ender 3s built yesterday and I've been having a huge fight with them when it comes to levelling. Even though the corners were levelled, after a lot of crappy tests, I levelled the corners again, then checked the center and I can't even get the paper underneath between the nozzle and build plate :(. So either the build plate is warped, or what I'm thinking is that the clips are pressing down the corners making them fine when levelling but then the center is raised. I'm going to get these upgrades and the bed you mentioned in a different video and hopefully that will fix it.
@THEGARLINGE
3 жыл бұрын
Amazing
@ChessieFan69
3 жыл бұрын
I put locknuts on the bottom of my bed screws. They kept turning. I lost a little bit of height. But feel happier with out them turning.
@Scottk2022
3 жыл бұрын
I just started binging some of your videos and am going to buy a ender 3. What brand of filament do you use?
@FranklyBuilt
3 жыл бұрын
Esun mono price sunlu overture
@Scottk2022
3 жыл бұрын
@@FranklyBuilt thank you for such a fast response! And thank you for inspiring me to start this hobby!
@cerulloperformanceseating900
6 күн бұрын
my extruter head doesnt have screws in it so i cant get it off. what can i do?
@redfeather_
Жыл бұрын
Me as an adult after playing with Lego's as a child:
@rcgigipj
3 жыл бұрын
thanks for the video just getting into 3d printing. i also picked up a used ender 3 v2 and the person put rubber bushings for the bed springs should i get the upgraded springs or stay with the rubber bushings.
@kobie4238
2 жыл бұрын
Thank yo so much!
@Starwarsfan8517
10 ай бұрын
Should we hear the scraping of the paper?
@Starwarsfan8517
10 ай бұрын
Should the nozzle scrape the paper hard and should I hear the scraping? I just want to be just write
@ironman_kyne25
4 жыл бұрын
GOOD ONE 😄
@prabhavathimajji8352
3 жыл бұрын
Sir what are the 3D printed upgrade you recommend for Ender 3
@FranklyBuilt
3 жыл бұрын
All metal extruder and Capricorn Bowden tube
@prabhavathimajji8352
3 жыл бұрын
Sir what is the 3D printed upgrade to Ender 3 (3D printed Part) like 3d printed fan silencer
@coreygiddens4100
Жыл бұрын
Hey I have an ender 3 and decided to upgrade and I watch all your videos. I bought all the items you did for upgrades and tried to follow this video to get have mine match this video.When it comes to leveling my bed I have the bed at the lowest and I've tried leveling 3 times but my nozzle still scrapes the built plate any suggestions
@mysterio553
9 ай бұрын
why does my extruder motor gear looks different and doesn't come out?
@ldycat1170
3 жыл бұрын
Do you have any other suggestions for the magnetic flex bed? It looks like that version is no longer carried
@FranklyBuilt
3 жыл бұрын
If you search amazon for CR10 or ender magnetic build plate they still come up
@MilesPrints
Жыл бұрын
My tube comes with a cutter should I just use that instead of a knife
@jamesmauch8573
4 жыл бұрын
Have you considered using a direct drive extruder?
@FranklyBuilt
4 жыл бұрын
James Mauch yep. Not a fan. I’ve never seen a valuable difference or benefit between them. I’ll use whatever it comes with but IMO it’s not worth swapping
@kevinmartinez55
3 жыл бұрын
Looking at this now should i buy this one and print this or buy the V2
@FranklyBuilt
3 жыл бұрын
V2
@mikemccabe2758
3 жыл бұрын
Amazon has a Ender 3 for 279. Can this printer print an entire suit like your Ironman. Thank you. Your video is very informative
@FranklyBuilt
3 жыл бұрын
That’s very expensive for an Ender 3. Keep shopping, they shouldn’t be more the. $200. But also I don’t recommend using it to make a suit. You’ll have to cut up the files a lot more
@mikemccabe2758
3 жыл бұрын
What printer did you use to print you Ironman suit?
@FranklyBuilt
3 жыл бұрын
Creality cr-10s
@mikemccabe2758
3 жыл бұрын
@@FranklyBuilt thank you
@BerryTheBnnuy
Жыл бұрын
A lot of your links are out of date. They're producing 404s on Amazon.
@derek750
4 жыл бұрын
Sorry I have another question. When I use a certain PLA filament I have to zero really tight just to get bed adhesion. Any suggestions?
@FranklyBuilt
4 жыл бұрын
derek750 no idea haha I stopped having adhesion issues when I got magnetic beds
@aggronn
4 жыл бұрын
Depends on what surface you have. But the biggest issues can be that the bed isn't level enough or that it isn't clean enough
@derek750
4 жыл бұрын
Thanks @Aggronn. Factory Ender 3 surface. It only happens with this one filament.
@aggronn
4 жыл бұрын
@@derek750 clean it with a little bit of soap and water, let it try, relevel the bed, first layer a bit higher in temperature and no part cooling fan on for the first layer
@derek750
4 жыл бұрын
@@aggronn awesome sounds like great advice. I really appreciate it. 🤙🏼
@MrSingh-bc5dv
2 жыл бұрын
I've bought the upgrade kit and put the new springs on but its too high. The springs are fully compressed and when I auto home the nozzle hits the bed. How do I fix this?
@Trekguy26
2 жыл бұрын
I moved the limit switch up slightly so home position is higher
@KageDoes3D
Жыл бұрын
also a 3d printing youtuber
@WolfCreates69
2 жыл бұрын
Do you print with abs or pla, if abs is it better to print with a magnetic bed or glass bed?
@FranklyBuilt
2 жыл бұрын
PLA+
@WolfCreates69
2 жыл бұрын
@@FranklyBuilt interesting thanks!
@alexnielsen3717
2 жыл бұрын
I use the stock magnetic buildplate on an ender 3 pro and i level and clean the bed everytime and it will not stick to the bed for the life of me and i dont know why
@joecowboy1276
4 жыл бұрын
Dumb question Do you have the list of materials that you used?
@FranklyBuilt
4 жыл бұрын
For what? The suit? It’s all listed through my MK85 build. Working on a master list in the discord
@raymiller8994
Жыл бұрын
The gear on my stepper motor is pressed on ?
@user-hb7hg2zh7n
2 жыл бұрын
The magnetic bed isn't available atm, i got one from Amazon and it isn't as strong as yours, what should I do? How do I know that the next one I buy would be stronger?
@DigitalConfusion1
6 ай бұрын
Try reordering, it's been 2 years.
@Enjeenier
Жыл бұрын
Can you do one for the ender 3 v2?
@alexanderpalmer6067
10 ай бұрын
please update these links
@foodstamp6952
Жыл бұрын
-_- Nice vid. No, the clips arent needed. nice place to store em. but youll never experience movement with this mag bed. impossible.
@mrhassell
6 ай бұрын
Ender just released the LGBT friendly woke printer, the Rear Ender
@supperman20012003
3 жыл бұрын
whyyy, tell them what happens when you convert to a all metal extruder , better yet a dual drive . Don't you think these company's know what to put on them , should have let my first one stock
Пікірлер: 89