Do you own a Bitmain Antminer L3+ ? If So, What Firmware are you currently running on it? Do you have it Powered On during the Bear Market?
@djblitzer82
Жыл бұрын
Just acquired an L3+, took me a bit with all the signature warnings but finally managed to get the HiveOn firmware onto it - experimented with different OCs except the 720 MH/s one because the fans were going crazy on the one below...anyway back to the 660w 504 MH/s OC, it seems to be the winner for efficiency and noise. Although, I am in Australia so it's summer here and we are on 220-240 V.
@1187209
Жыл бұрын
@@djblitzer82 I'm also Australian and have some L3s; currently running stock firmware but looking to upgrade the firmware as soon as I find the time to do so. I appreciate the info.
@TheShaggyo
Жыл бұрын
Got 3 l3++ on hive os firmware and will not connect to any pool was running fine not now help please
@simmo6035
2 ай бұрын
Hey. Sorry, I know it's an old video but can L3+ be turned off or 'pause mining' remotely? I have no mains power connection but ample solar power 9 months of the year. It would be great if I could turn them on/off remotely based on the weather at the time. Thank you
@arigornstrider
Жыл бұрын
I just picked up a couple L3+ 504m units recently that had the HiveOn firmware on them. The dev fee was taking more than the quoted 1.8% on my two, even after updating to the latest HiveOn firmware, so I ended up switching to a different firmware that doesn't charge a dev fee. Still has the fan control and overclocking and undercoating features, so I'm glad I made the switch. For the noctua fans, you can use a pair of flush cutters to remove the inset tab off the noctua fan connector, that way you keep the tab on the control board fan header to make sure you plug the fan in correctly.
@1187209
Жыл бұрын
What firmware did you end up using?
@uddemannen
Жыл бұрын
2.8% dev fee on hive...i ended up with no fee firmware too. I had major safety issues with hive and just that you can't delete your account without contacting support is just annoying.
@danbulmer
2 ай бұрын
good stuff HM. Converted my L3+ over today when I logged into it and saw that 80 percent of the hash rate was going to the dev accounts. Up and running thanks to your help. Will be flashing this OS onto my two S9s as well for what it's work. Keep up the great web content.
@TheHobbyistMiner
2 ай бұрын
Good stuff!
@kf4wnf
Жыл бұрын
I just picked up 3 L3+'s this week and found this video and upgraded all 3 to the HiveOS Firmware. After doing so and running a few days on ProHashing, I noticed I really wasn't making hardly anything. Started digging around and found out that Hive has a built-in "Dev Fee" in their firmware. i.e. Hive is sucking out around 3% in the background on each miner running their firmware. So, all these KZitemr's out there promoting to install Hive Firmware are probably getting paid to promote it. Because NONE of them are telling about this hidden fee. They state that the Hive Firmware is FREE...however, it is far from free. They are charging you in the background.
@Cardmonger
Жыл бұрын
What firmware do you recommend?? I just got an L3++
@rondy87
Жыл бұрын
Attention to little details like this is what would make u 100k sub YT channel by 2023...easily. Good stuff man!! 👏
@TheHobbyistMiner
Жыл бұрын
Thank you! I always find Guides are never detailed enough. I'd rather have MORE than not enough. So I like to show the community every step, even the stupid ones.
@leewallace7006
Жыл бұрын
just so you know, for if you have to do another , you dont need to take the screws out to slide the control board out , just hold the clips open and it will slide out ;-)
@TheHobbyistMiner
Жыл бұрын
Thanks!
@cryptokrag7922
Жыл бұрын
I use the HiveOS firmware on some of my S19's and really like it. Good stuff!
@RGD-Audio-Repairs
23 күн бұрын
Hmm. The auto tune settings in HiveOS... got mine down to 502Mh/s at 690w..... Was hoping for the 400-450w range..
@enokanature1
9 ай бұрын
Great video been watching you for awhile, thought this guy probably got a video on asics setups, amazing stuff , thank you
@Couldntellya
5 ай бұрын
What is the name of the video for the S19? Can you add a link to it in the description please?
@mustachemining6275
Жыл бұрын
That was an extremely well done video. Great work! Keep it up.👍
@TheHobbyistMiner
Жыл бұрын
Thank you! I tried to even make it shorter, but I wanted to be as detailed as possible.
@Couldntellya
5 ай бұрын
this video !!! great job. exactly what I was looking for. thank you.
@SwanCastleCrypto
Жыл бұрын
Very well done, I know how much goes into making a good tutorial. Thanks!
@AxisCreekMining
Жыл бұрын
How did u get to 400 ish watts? I did same thing and I’m getting 660w 504 mh? Did you adjust any other settings? GREAT VIDEO BTW very informative and easy to follow!! No BS and straight to the point!
@TheHobbyistMiner
Жыл бұрын
Was a bug I found. A reboot and I am at 660watts.
@AxisCreekMining
Жыл бұрын
@@TheHobbyistMiner Ahhh gotcha thank you for the info! Keep doin what your doin it’s greatly appreciated 🫡
@llcoolturtle5378
Жыл бұрын
I just kept uploading/upgrading the files on the L3+ console, worked about the 10th time lol
@AngelGonzalEstation
Жыл бұрын
hey there, i need some help... mine was just light red and blue of the board on for 1 min, then red light flashing for a min, then still for 5 secs then green light flashing
@darmostechne4032
7 ай бұрын
good job! I wanted to ask you a question, I installed the firmware on an L3+, but the browser doesn't accept the default password. do you have some advice Thank you
@DavidGalan777
Жыл бұрын
Great tutorial! Can you say how much LTC (or $ equivalent) it makes per day ?
@MrSkinny602
Жыл бұрын
It would be awesome if the doge coin miners could be added into hive and get some efficiency.
@TheHobbyistMiner
Жыл бұрын
Are you referring to the Mini ASICS from Goldshell that Mine Doge and LiteCoin? If so I heard its on the roadmap for HIVEOS.
@hiveon_official
Жыл бұрын
We are planning on bringing these models into the fold, although we don't have an exact ETA for the release.
@javansheneman3659
Жыл бұрын
Awesome video. Thank you. Did you ever end up replacing the fans?
@TheHobbyistMiner
Жыл бұрын
Video Coming up this week!
@Way2fast4ya
Жыл бұрын
@thehobbyistminer - great video! I have 4 GPU rigs on my Hive account already so I have maxed out the free account limit. If I add one of these ASICs, will that put me over the free account limit and activate all of them now to charge me each month? Any ideas here and hope that makes sense?
@ruszip1
Жыл бұрын
I would be interested in what the firmware does on a L3+. At this second, I see 548mh, 24 hour average of 519mh , at a setting of 400m, lowest voltage, 702 watts, using BlissZ, Litecoinpool. I can get lower power usage 387m and lowest asic voltage, 680 watts using an HP 1200 watt platinum HSTNNS-PL30 but I'm not real sure of the 24 hour average.
@TheHobbyistMiner
Жыл бұрын
I am eager to try some other power supplies. Right now it has the APW3+ on it.
@bojangles28
Жыл бұрын
I just used the upgrade tool inside the Miner to upload the HiveOn firmware. No SD card or disassembling of the L3
@TheHobbyistMiner
Жыл бұрын
If that works, stick with it! I have had issues in the past with Bitmain Firmware blocking outside Firmware actually. They put something in their newer Firmwares. So SD Card is the only way to go there.
@bojangles28
Жыл бұрын
@The Hobbyist Miner I had the same issue, I had to use a resignature file, that HiveOn also has. Upload that, reboot. Then upload the HiveOn firmware
@markbale7002
Жыл бұрын
Did this reduce the noise levels on the better efficieny settings?
@dkroen17
4 ай бұрын
How easy is it to revert back to the bitmain software?
@kennycheng9538
Жыл бұрын
Hi, Bro! thanks for that amazing video!! greting from China and I am your super fans. i wondering to ask you maybe could make an video for building an Aleo node?
@TheHobbyistMiner
Жыл бұрын
Thanks for your support. I am not familiar with Aleo
@kevinbrown8920
Жыл бұрын
So I know the hashrates are different STOCK on the different submodels for the L3, my question is how the hashrates change on hiveos firmware, are you still getting 504mh on the 660 watts for the L3+ 504mh model?? Can't seem to find the stats on those submodels...?
@TheHobbyistMiner
Жыл бұрын
ASIC Miner Value has the Stats for the different sub models. But once you go to the HIVEOS Firmware its all the same.
@leewallace7006
Жыл бұрын
where does the doge coin go , if you dont put a doge wallet adress in flight sheet ?
@TheTravelersTravels
Жыл бұрын
Great video! 👍👍 I'd like a Hiveon asic hub video please
@TheHobbyistMiner
Жыл бұрын
Adding it to the List!
@germanretorto8177
Жыл бұрын
Hola amigo, cómo puedo ver el estado de los chips ? En hiveos?
@bobsingle45
Жыл бұрын
I see the L3+ & L3++ used interchangeably. Is there a difference?
@TheHobbyistMiner
Жыл бұрын
Hashrates. There are 4 different L3 Models using the name L3+ or L3++, Their Hashrate and Watts Differ. My L3++ Model is from factory 580Mh/s at 942watts. Check ASIC Miner Value you can see all of them.
@BlessedNoob
Жыл бұрын
Going through the Ip address of the miner with Bitmain software I've had much better luck and oc than through hiveos
@Giroux68
Жыл бұрын
Let’s see this with the s19j and the asic hub!
@TheHobbyistMiner
Жыл бұрын
Don't need ASIC Hub if you move to the HIVEOS Firmware on the S19J Pro. My S19J Pro's control board is too new, waiting for them to update their firmware
@videoswitmusic
Жыл бұрын
does this work on the a4+?
@ahmed987-p5d
Жыл бұрын
How come you got 430w I get 660w in software and 700w on Wall using the same settings for my L3+
@TheHobbyistMiner
Жыл бұрын
Only thing I can think of is temps. This is in my shed and its 30 F outside.
@cafrmen
Жыл бұрын
@@TheHobbyistMiner So you still have 430W after few days? Thanks.
@M-A-C-
Жыл бұрын
Can these by run off 120v outlet?
@hiveon_official
Жыл бұрын
An L3+ can run off a 120v outlet with a PSU like an APW3++.
@TheHobbyistMiner
Жыл бұрын
Thanks HIVEOS for the details!
@NewEnglandCrypto
Жыл бұрын
@@hiveon_official FTW
@briananderson305
Жыл бұрын
Will this work without Hive OS?
@TheHobbyistMiner
Жыл бұрын
Yes. You could upgrade the firmware and not tie it to your Farm Hash.
@lordPix3lUK
Жыл бұрын
Its easier to just flash it
@ultramega8792
Жыл бұрын
People that Use Mean Well AC-DC Single Output LED Drivers for Power , Get far better performance , than if they use the China Drivers, most Things use China Drivers for Power, Mean well Drivers, made in the USA, are a lot more power efficient ! I think its the DC, Current that provides more efficient, it does not Wave like AC. Eddy Current ! Does Mean Well Make a power Supply for Your Machine ? i bet it Does. I Notice China Writing on the Power Supplies Used by minors. Maybe I am Wrong, But pot Growers Prefer Mean well Power Supplies for the Grow Lights...
Пікірлер: 72