Check out my 2nd channel: Jr's Gasoline Alley where I review R/Cs Cars and DIYs - kzitem.info/rock/pRReJABfwDGgsfSTYiItUg
@justintocco1785
3 жыл бұрын
Based on your suggestions, I went to my local Treck dealer and purchased new 27.5 Bontrager Line Comp 30 wheel with this hub and added the extra pawls. Many rides on the wheel with zero issues and noticible engagement. Best $130 I ever spent. Thanks 😊
@Jamesthebikeguy
3 жыл бұрын
Nice! Such a good upgrade for the cost
@aboodiaz262
5 жыл бұрын
Man , very helpful stuff , very underrated channel , you need more subs man salute
@Jamesthebikeguy
5 жыл бұрын
Thanks, I appreciate it!
@tambouyahia8716
Жыл бұрын
@@Jamesthebikeguy Good morning, from which site or store did you buy Pawls
@raphaelkoikoi8326
Жыл бұрын
I used your video to install pawls and spring on an xdr hub. And then install it on my Bontrager Pro3V wheel. It worked. It was too easy so much so I was surprised at how little time it took once I got all the parts I needed. Good Stuff.
@CordlezToaster
2 жыл бұрын
Hey James, I just did this upgrade an I love the difference it made. I feel I have more control in the climbs now. If anyone is sitting on the fence about this upgrade it’s worth it. Really appreciate you making the video on this. It made it really simple and stress free. Thanks a heap!
@Jamesthebikeguy
2 жыл бұрын
Awesome, glad you got it done and have fun!
@thijsgruwez3753
2 жыл бұрын
Ordered the parts. then realised I will need a tool to unmount the 12-speed cassette so I ordered a tool kit. Before using the tool, I first tried to gently pull off the outer ring which comes out of the cassette (which turned out to be the tip of the xd driver, I'm such a noob at this haha) and... pulled the whole thing off all together. All pals perfectly in place. Lucky me. Placed the 3 new pals and springs easily and slided the complete casette with xd driver onto the wheel again. Piece of cake. For sure double as much clicks for every full wheel spin. I'm quite curious if I will also feel any difference. Thanks for the tip
@1Longranger
2 жыл бұрын
The 2022 Trek Fuel EX8 I have comes with a 108 poe hub from the factory. Nice!
@Jamesthebikeguy
2 жыл бұрын
Oh that's awesome
@Kralasaurusx
4 жыл бұрын
Super helpful. I'm just about to swap out my Shimano hub for an XD and probably wouldn't have realized that I could upgrade to 108t without coming across your video. Thanks dude!
@Jamesthebikeguy
4 жыл бұрын
Glad I could help!
@nadeeraweerasinghe4213
4 жыл бұрын
This video is just what I was looking for. I have a Fuel ex 5 which Also has the same 54 tooth hub. I love the bike but the latency of hub engagement has been bothering me a bit. You specially notice it when you are going uphill and quickly trying to shift gears. Never realized it was this easy (and cheap) to double the engagement. Now hopefully my local trek shop has these parts. Again super helpful video!
@don-balsawood3932
2 жыл бұрын
Great video, informative and succinct for nervous "mechanics". Thanks!
@PabloMollAN
5 жыл бұрын
Very useful video James. Thanks a lot for uploading this. I just did it. Blew my mind. Greetings from Chile 🇨🇱
@Jamesthebikeguy
5 жыл бұрын
Thanks for watching! Hope you have a great time riding!
@SickMemberShaun
2 жыл бұрын
Does it need to be specific grease or can I use the same grease i use in my hope hub ?
@or-ian6973
9 ай бұрын
Careful when pulling the hub off. I shot two pawls across the garage.
@bernarddahl
3 жыл бұрын
James, your vids helped me steer through my new wheel purchase, many thanks! Liked everyone I came across. The stock wheels on my bike came with this hub; the Bontrager paradigm 25 comp has the 54-tooth hub. My new wheels, the Aeolus Pro 5s, come with 24 teeth. As far as you know, is there any way to switch these, to get the 54T (which would be boosted to 108!) on the Aeolus 5s? Other than rebuilding the wheel to switch the hubs, of course. Thanks + cheers!
@HomestarWayners
Жыл бұрын
That was awesome! Super helpful- gonna tackle this tonight!
@willbennett7107
4 жыл бұрын
Replacing my free hub body as my cassette has chewed straight through the damn thing so definitely going to do this upgrade when I get my new free-hub
@Jamesthebikeguy
4 жыл бұрын
What cassette were you running? Chewing freehub bodies is pretty normal especially for cassettes that rely on individual cogs rather than carriers.
@daem3n
2 жыл бұрын
Dude. This video is gold! Thank you so much! I will be doing this for sure.
@Jamesthebikeguy
2 жыл бұрын
Glad to help!
@Jamesthebikeguy
2 жыл бұрын
Glad to help!
@allenjanes5976
5 жыл бұрын
Yeah, nice job. Thanks for the info. I have line 40's n love em
@Jamesthebikeguy
5 жыл бұрын
Nice, so you have already enjoyed the 108t of engagement!
@JohnFHendry
2 жыл бұрын
It would seem best to add the 3 pawls to go to 108 PoE from 54 when new so pawl ends have equal engagement, as there must be some ware occurring to the pawls contact points on an all mountain E-bike doing a lot of technical climbs in low gear. Correct?
@nvkulk
3 жыл бұрын
Thanks I used your video to service my free hub Awesome job
@Jamesthebikeguy
3 жыл бұрын
Nice 👍 happy riding
@philbrown8056
Жыл бұрын
It's really a shift design. They are well known for spinning in the rim!
@davidecolombini6244
2 жыл бұрын
is it mandatory put the grease? What can happen?
@BillDavisVBKI
Жыл бұрын
You'll increase wear on the metal to metal engagement and prematurely wear out your contacts where they engage. It is rather rare to have any metal to metal contact without lubrication. Think of it as you would your car. How will your transmission hold up with no lubrication?
@nandamandir7880
3 жыл бұрын
Other than a louder hub, what’s the benefit of upgrading to 108t?
@leethursfield666
4 ай бұрын
I've had to replace 2 of my hyperdrive hub they are awful the cassette keeps slipping on the hub chewing it to bits when pressure is applied. I'm looking to replace set up to campagnolo hub and cassette
@christianr9629
2 жыл бұрын
hi james what is the difference between stock Shimano free hub and the XD driver?
@matthewmoran1271
Жыл бұрын
One is for shimano the other is for sram
@bobbybrandnew3277
3 жыл бұрын
You're doing God's work with this video man. lol thank you. oh question though, if one is on a tight budget, would not upgrading to xd driver affect the result of the upgrade? thank you.
@Jamesthebikeguy
3 жыл бұрын
You can do the upgrade to the stock rapid drive freehub body. The swap to XD was simply because I was changing the drivetrain.
@bobbybrandnew3277
3 жыл бұрын
@@Jamesthebikeguy thank you so much man.
@justinjohnson3039
4 жыл бұрын
Great Video. My end cap seems stuck on, wont come apart. Any tips on that?
@rickyrez4527
Жыл бұрын
insert into a vise and pull up. (use soft jaws)
@scottwhittet5226
4 жыл бұрын
good video , not too long - just hat we need to know. Suggestion : include sourcing options for the springs and pawls , most bike shops do not have these parts.
@Jamesthebikeguy
4 жыл бұрын
The souring option is your local bike shop. Bontrager isn't sold on Amazon, nor should that be the place you buy bike parts.
@islandaerial3414
2 жыл бұрын
Hack: Wrap a thin piece of string around the pawls to compress them when dropping into the cage
@virkelie2
Жыл бұрын
I don't understand. How does adding 3 pawls increase the engagement from 54 teeth to 108 teeth? Adding the 3 pawls does not double the number of teeth in the hub (if it does, how??).
@oarlopez
3 жыл бұрын
where can i buy this special grease? is´t like dt/swis?
@THSimagery
3 жыл бұрын
What hey there! Thanks for the tut!!! Sweet! Saving me some doe! What tool are u using to remove the cassette?
@thijsgruwez3753
2 жыл бұрын
Hi, without the upgrade, I would presume the 3 pawls grip onto the hub at the same time (if they are equally divided at least). It seems like adding pawls just adds more noise to you wheel when freewheeling and not really increasing the amount of contact points between the 2.
@Jamesthebikeguy
2 жыл бұрын
When going to 6 pawls you still have only 3 engaged at a time. The additional 3 pawls are clocked out of phase, thus doubling the engagement and decreasing the free travel by half.
@nultianeks
2 жыл бұрын
@@Jamesthebikeguy ok, now it makes sense Thanks
@thijsgruwez3753
2 жыл бұрын
Thanks
@DPAY1000
3 жыл бұрын
Is this the hub that comes with a 2014 trek remedy 9 27.5? Thank you
@chrisraymond7779
4 жыл бұрын
I'm going to give this a go when I pick up my Aeolus Pro 5's
@clarks888
4 жыл бұрын
You may not notice much difference if you're mostly riding on pavement (which I am assuming based on the wheels you mention). The rapid engagement is really really nice off-road where you tend to stop and resume pedaling a lot more often, and you want the hub to engage quickly. 54 teeth is a pretty good amount for the road though (for comparison, a Chris King R45 hub has 45 points of engagement). The upgrade to 108 teeth on your Aeolus wheels certainly won't hold you back in any noticeable way (the tiny extra drag from three more pawls is only present while coasting), so go for it if you want a fun little project! Put some nice, supple tires on there with latex tubes while you're at it!
@Jamesthebikeguy
4 жыл бұрын
While Clark is right there wont be that much difference on the road it is still going to be a nice and fun upgrade. Good luck!
@sebastiengiovannelli8556
Жыл бұрын
Hello, can you help me ? I would like to know which microspline freehub I can put on a bontrager line comp 40 ?
@tomfrantz
3 жыл бұрын
Such a well made video. Thank you.
@Jamesthebikeguy
3 жыл бұрын
Glad you liked it, thanks
@rAyBieS25
3 жыл бұрын
what alternative grease can you use if the "special" grease isn't available?
@patrickesper2252
3 жыл бұрын
Same question. Just following hoping for an answer.
@jamstonuk
3 жыл бұрын
Have you ever changed the bearings on this hub or know how to. Trying to figure out if you need to remove the ring that the pawls engage with before trying to knock the axle through from the non drive side 🤔
@virkelie2
Жыл бұрын
Some say that increasing the engagement of the hub weakens the hub. Is this true? If it is, could someone explain why?
@julianrodriguez3451
3 жыл бұрын
Thank you for the video my question is can i modify the free hub body from my trek marlin7 to use a 12 speeds cassette?? Thanks again
@miguel.meizoso
Жыл бұрын
Couldn’t find this grease. Other suggestions for lubing?
@BramBiesiekierski
4 жыл бұрын
Awesome video. Im total newb with mountain bikes. Bought my first hardtail last week. (2020 Trek Roscoe 8) Does this upgrade apply to this bike? It has 27.5 Bontrager Line 40. But the hub spacing is Boost 141. (Not the standard Boost 148.)
@BramBiesiekierski
4 жыл бұрын
Just looked at the specs on the Trek site. The rear hub is : Formula DCL-141Q. I take it this is not the one in the video?
@PopoySD
3 жыл бұрын
I have a Trek with the rapid fire rear hub. So all I have to do is buy the extra pawls and springs if I’m just increasing the engagement points? I just want to make sure because I’m new to all this. Thanks!
@jeremydecatelle2680
3 жыл бұрын
I will do the same thing but do i need to change the end cap? Is it the same end cap for shimano/sram?
@sveinungraheim5992
4 жыл бұрын
Great video! I am in trouble with my 2019 fuel ex 9.8. The free hub is destroyed, on of the pawls has loosend and destroyed the free hub. When I first removed it, the free hub was loose. I cleaned it, took out the pawls and put the wheel back on to the bike. For transportation m.m. When I took the wheel off again, I am not able to take off the free hub. It rotates smooth, but I just cant remove it. So, dear expert, how much force can I use? Or are there any other tips? I am waiting for a new free hub and new pawls, so I dont need to take to much care about the old hub. Am I in trouble or are there some "easy fixes"? I have spaces for 6 pawls, that means I can put in all 6 and get a tighter and stronger hub? Thanks! Sveinung, Bodø, Norway
@tomerttb
3 жыл бұрын
What can I do if the axle end cap is not coming out? Tried with hand/glove Tried with pliers, using lether to protect from scratches. Any ideas? Thx
@laurencejames8623
4 жыл бұрын
Very helpful thank you!
@RedStarCycles
2 жыл бұрын
What's the actually mechanical effect or advantage of doubling the number of pawls? If the ID on the ratchet teeth is about 30mm than each pawl will move a maximum of about 1.5mm (ok 1.72mm) until it catches the ratchet (engages). Given that the number of pawls doesn't change that distance, engagement cant be any quicker. Six points of engagement will certainly be stronger because there will be less stress on the parts but how often do pawls fail from a compressive force? 40 years ago when ratchets had fewer teeth, there was some advantage to more pawls because you could get a tiny 'dead spot' before the pawls engaged but with 30 plus ratchet teeth (54 on the Bontrager) that's not a thing. The noise aside (which sounds great - NGL) is there any way to measure this increased strength or notice any difference? Also what does 108 tooth engagement mean? Each pawl still engages with 54 teeth and you're not doubling the number teeth. 3 and 6 tooth engagement would be more accurate.
@masterg7895
2 жыл бұрын
I understand that you have good knowledge of mechanics and how things work, there's no doubt. But i did this upgrade at the Trek shop recently and there is a very noticeable difference in the engagement when pedaling and when just moving the bike around, the ratcheting sound is twice as much, just from moving the bike around and letting the wheel turn slightly, the amount of clicks you hear is insane!
@willemteale5020
2 жыл бұрын
The hub is 2 phase, so the gap between the pawls vary, so when you add the extra 3 they engage as the other 3 are inbetween the teeth in the drive ring
@rickyrez4527
Жыл бұрын
you change your engagement of the drivetrain from 6 degree to 3 degree which feels instantaneous. more engagement points helps when climbing rock gardens, or climbing in general... only downside is the added friction (and noise). basically great for climbers and sprinters not so much dh or descenders. if serviced properly you should not worry about the pawls failing.
@ilgour
3 жыл бұрын
thanks for the video, very usefull
@chrislitova6812
4 жыл бұрын
If i have the new sram GX 520% cassette on my bike shouldn’t it already have the XD driver on it ? Including the 108t or is it possible for an XD driver to still have 54t? Cheers from chris
@jongaquarius
2 жыл бұрын
nice Video, just wondering if i can do the same for duster elite boost148 hub?
@marviorose7614
3 жыл бұрын
Awesome man thank you
@azwaniskandarazmi8177
Жыл бұрын
Hi James...I am currently using Bontrager Aeolus Elite 50....is it possible to change the current freehub to 108t as well as u shown in this video?
@stevex1073
2 жыл бұрын
Excellent instruction
@Jamesthebikeguy
2 жыл бұрын
Glad to help
@julianrodriguez3451
3 жыл бұрын
Good video can I make that up grade for any kind of bontrager hubs I have a marlin 7 2019 thanks
@chrissahagun4803
Жыл бұрын
Can you please add links to where we can buy this stuff at?
@illusion347
2 жыл бұрын
I can't seem to find the Bontrager hub grease online. If I keep the stock hub body, is it absolutly necessary to add grease ? or could i just use my finger to spread the grease that is already on the other pawls? Thank you !!
@brasso9393
3 жыл бұрын
Is there any big difference of this hub vs those on Kovee TLR X-Caliber 2021 model? The rims are the same though. Trying to justify the xtra $
@brycecole432
4 жыл бұрын
Great video. I have a 2019 EX 7 and the hub stopped engaging completely. Since I need to rebuild it do I just buy double to springs and prawls?
@Jamesthebikeguy
4 жыл бұрын
Well it depends on what broke. Have you taken yours apart yet
@Jetta32696
3 жыл бұрын
Awesome tutorial!! Will this work on a 9 speed hub as well?
@Jamesthebikeguy
3 жыл бұрын
No unfortunately
@Jetta32696
3 жыл бұрын
@@Jamesthebikeguy I didn't think so, but figured I'd ask before I spent the $$ and tried this at home. Thanks!
@gonzalopenagos1351
Жыл бұрын
So it means that with these 3 pawls you can get extra 54 points of engagement; the free hub always works engaging alway 3 pawls at a time?
@Jamesthebikeguy
Жыл бұрын
The pawls are phased, so 3 work at a time.
@mouradmougou5249
5 жыл бұрын
Does it really make a big difference, because for me (16 y/o) €30 is not cheap for these small parts. And do you think I can use sram butter instead of bontrager lube?
@Jamesthebikeguy
5 жыл бұрын
It is for sure worth it, and comparison very cheap for the performance you get
@mouradmougou5249
5 жыл бұрын
Jamesthebikeguy thanks, and about the sram butter vs bontrager lube?
@trp1751
4 жыл бұрын
@@mouradmougou5249 Lube is lube. Bike specific is a bonus.
@zacspies3369
5 жыл бұрын
Hey mate great video, just wondering where you got the XD driver from cause i am looking at getting this hub but i need a XD driver for my bike
@Jamesthebikeguy
5 жыл бұрын
You can purchase the xd driver from your local Trek store
@raphaelkoikoi8326
Жыл бұрын
Nice!
@jaimebalgoa2321
3 жыл бұрын
Thus the 32 hole rim will be compatible to this 28 hole hub? Coz i have roscoe 7 planning to upgrade my rear hub.
@scottlynx30
3 жыл бұрын
Im putting line 30 wheelset on my Xcal 8. I have the endcaps from Trek to convert to boost 141. Is the XD driver the same part # to upgrade it to GX?
@Twisted_Biscuit
4 жыл бұрын
If I have an sram cassette on line 30 wheels, can you just add more pawls to it or do you need a new driver entirely?
@Jamesthebikeguy
4 жыл бұрын
Just add the 3x pawls and 3x springs. Your local trek dealer can get these for you.
@czapla1980
3 жыл бұрын
3 pawls, 3 springs and grease ;) That sounds like a crazy cheap upgrade to my new Remedy 9.7 with 27,5 LINE 30 COMP wheelset. I wanted to change wheelset and breaks, but yesterday came up with new idea regarding wheel - a 108t hub upgrade, and better rims. Any suggestions? :)
@MaxMustermannnnnn
5 жыл бұрын
I cant slide the freehub body in right place. Is it necesssary to remove the casette?
@Jamesthebikeguy
5 жыл бұрын
It makes it easier with the cassette off but not required. Make sure your pawls are seated properly and the bearing spacer in the middle of the freehub is aligned before you put the freehub back on.
@dannyvisitacion8975
3 жыл бұрын
Hi Is that work For marlin 5 cuz I’m planning to upgrade my bike to twelve speed the way you demonstrate on the video look cool thank you .
@luongk88
3 жыл бұрын
Will a Marlin 5 hub even accomodate a 12 speed casette?
@ardesheerford1741
Жыл бұрын
Thank you
@clpbrd
3 жыл бұрын
I have line 40 wheels with 54t rapid drive, would I be able to do this same conversion?
@iamxray
4 жыл бұрын
Thanks for video! Can you share online store where can I find this parts?
@Jamesthebikeguy
4 жыл бұрын
Links are in the description of the video
@oli2977
4 жыл бұрын
@@Jamesthebikeguy well there not? Where are the links to the products
@lbank4526
4 жыл бұрын
Are there any Trek hubs that can be upgraded? I have a 2019 Trek Roscoe 8 that I want to do this with. Just subscribed also... great video.
@Jamesthebikeguy
4 жыл бұрын
Just the rapid drive hubs
@perrymeister898
4 жыл бұрын
cool, gonna ask my trek dealer if they can do this for me on my bontrager wheels.
@Jamesthebikeguy
4 жыл бұрын
I'm sure they can. Prob charge for parts and a hub overhaul
@kidShibuya
3 жыл бұрын
How do you remove the endcap? No video covers this
@Jamesthebikeguy
3 жыл бұрын
Pull it off. No trickery it just pulls straight out
@kenbrooks8870
2 жыл бұрын
Yes an old post but for future reference, I used an automotive pilot bearing slide hammer. It popped right out with no damage.
@italianrelic
4 жыл бұрын
James... I have 2017 Bontrager line pro 40 it has an xd driver but 3 pawls only. What your saying is if I buy the items you stated I can go to 108 no problems? Thanks if you respond!
@Jamesthebikeguy
4 жыл бұрын
Yes so long as they have the rapid-drive hub.
@fabiantitsing435
3 жыл бұрын
Can I also upgrade my hub for the trek x-caliber 7 from 2021?
@dylanalmony7735
3 жыл бұрын
I have a trek marlin 6, this will work on that right?
@squanchyhernandez-married8396
2 жыл бұрын
Will this work for bontrager 148 boost hub that comes with 2019 stache 7
@reidizon5974
2 жыл бұрын
I have a domane al3 disc adn it came with a formula hubs and would like to change the free hub to a 6 pawl. what free hub body can be a good upgrade or you recommend? thanks
@Jamesthebikeguy
2 жыл бұрын
I don't believe those wheels have an option for upgrading.
@1brandonbowman
4 жыл бұрын
If i have oval concepts 327 where would i find that part I’m coming up with nothing that says how many teeth are on it
@digitechreprographics3837
5 жыл бұрын
Can you add links to parts? Having a hard time finding the springs.
@Jamesthebikeguy
5 жыл бұрын
No links are available. These are only available through your Trek dealer.
@vegaone571
2 жыл бұрын
Do I really need this soecial grease? Seems like Bontrager is just selling one standard grease nowadays. Cant find this special little bottle with hub grease. I have normal waterproof grease here, is there a difference?
@Jamesthebikeguy
2 жыл бұрын
Do not do not DO NOT use standard waterproof bike grease. You will end up with broken teeth on your pawls. You don't have to buy the Bontrager grease, DT Star ratchet grease works well, Phil wood makes hub grease, lots of brands. The viscosity and weight of grease inside your hub is very different from run of the mill waterproof grease
@vegaone571
2 жыл бұрын
@@Jamesthebikeguy Thanks for the superfast answer! Can you link the Bontrager hub grease? I cant find it..
@Jamesthebikeguy
2 жыл бұрын
No they don't sell it online just though the bike shop. Most any bike shop should have suitable hub grease. Brand doesn't matter as much as the type. Ask and they will get you something appropriate.
@litosoneja
4 жыл бұрын
James, can I upgrade my Aeolus pro tlr disc to a more point of engagement and do you know the Bontrager part number I need to buy. Thanks
@Jamesthebikeguy
4 жыл бұрын
If they have the Rapid Drive hubs its the same PN as this.
@ethanholt8835
Жыл бұрын
By any chance do you still have that shimano freebody you could sell?
@thijsgruwez9848
3 жыл бұрын
What I don't get... don't all 3 pals grip in the teeth of the wheelhub at once? If that is the case, I don't see how you get double more contact points by adding 3 pals if all pals are equally divided every 60°.
@Jamesthebikeguy
3 жыл бұрын
It doubles engagement because the second set of teeth are in phase. That means when the one set of pawls engage the others are not
@furiousstylze1
5 жыл бұрын
Hey great video, I have the 2019 trek fuel ex 5, can this be done to that hub as well or do I have to get a whole new rear hub?
@Jamesthebikeguy
5 жыл бұрын
New hub. The EX5 does not use this hub
@natedawgg77
4 жыл бұрын
@@Jamesthebikeguy do you know if the ex 5 has the ability to be upgraded at all?
@bartoszodrobinski2815
4 жыл бұрын
Hi. Great guide. I have got a slight issue though. I am unable to get that little cap off. Tried to wedge something in to remove it but it won't move. Any tips? Thanks
@Jamesthebikeguy
4 жыл бұрын
Rag and some pliers
@bartoszodrobinski2815
4 жыл бұрын
@@Jamesthebikeguy done and dusted! Great video!
@michielstuip3547
3 ай бұрын
I have the same issue! The XD driver end cap came easily off. Getting the Microspline version on was very hard. And even harder to get it off. There is a rubber o-ring inside and on the wheel axis is a ringed slot. I ordered a new one (damaged the cap in despite using a rag between pliers. Also some of the springs got damaged. Ordered new springs and a end-cap! Will soon try it again!
@scottwhittet5226
4 жыл бұрын
Question: does "upgrading from 54 tooth to 108 tooth by adding (3) more pawls to the existing freehub body make the hub coasting sound louder or quieter ? I want quieter and with less slipping action when I start to pedal again after a freeheel/coasting section of road or trail ... ?
@Jamesthebikeguy
4 жыл бұрын
Louder
@benbassett1124
2 жыл бұрын
Add more grease, for less noise!
@BillDavisVBKI
Жыл бұрын
@@benbassett1124 not really. Over doing the grease just causes other issues.
@manolovasquez8631
2 жыл бұрын
Do I have to reapply some grease if my I dont change my hub and my bike is new?
@Jamesthebikeguy
2 жыл бұрын
You need to add grease if you had pawls
@geraldbagui3945
3 жыл бұрын
Hope all can afforf this kind of hub hehe
@Jamesthebikeguy
3 жыл бұрын
You can!
@leethompson5635
5 жыл бұрын
May sound like a daft question but what performance upgrade does this give the bike? Does it make the hub more durable in terms of reliability?
@Jamesthebikeguy
5 жыл бұрын
It gives faster engagement, for better control pedaling. Shouldn't make any difference with reliability
@leethompson5635
5 жыл бұрын
@@Jamesthebikeguy that's cool thanks man 👍
@Dilberto88
Жыл бұрын
Will the increased POI lend to nastier pedal kickback? I have a 2021 Trek Rail 9.8 GX.
@toddedgington1844
4 жыл бұрын
Hi looking at buying some hope wheels. I have a 2018 trek remedy 7 can you tell me which hub body I need please? It’s 11 spd and all original SRAM? Cheers
@Jamesthebikeguy
4 жыл бұрын
What groupset?
@peteradamczyk
3 жыл бұрын
Hello, do you think that upgrade would be possible in Trek Fuel EX 5 from 2021? The hub in tech specs is described as "Bontrager alloy, sealed bearing, alloy axle, 6-bolt, Shimano MicroSpline freehub, Boost148, 12 mm thru axle" . There is nothing about "Rapid Drive". I've noticed that on EX 8 from 2021 the hub is described in the same way.
@Jamesthebikeguy
3 жыл бұрын
It will not. The 2020 EX5 came with the generic Bontrager hubs. (Rebranded OEM).
@peteradamczyk
3 жыл бұрын
Sad :( Thank you for the fast answer.
@DiscernDnBnDuB
2 жыл бұрын
double the pawls, does not double the teeth, you still have 54 teeth in the hub and still have 54 clicks per revolution.
@Jamesthebikeguy
2 жыл бұрын
You're forgetting that you can put the pawls out of phase. That's exactly what they've done here so by adding twice as many pawls but at a different phase, you do double the number of engagement points. Lots of brands do this as a upgrade, look to industry 9 as one of the pioneers of having a low and high level engagement by offering two phases on the freehub body
@DiscernDnBnDuB
2 жыл бұрын
@@Jamesthebikeguy the pawls are not out of phase in this drive, the machined pawl recievers are at equal angles and all click at the same time.
@Jamesthebikeguy
2 жыл бұрын
Not true. Take some more time to think about it. You *would be correct in the statement you made, however that is not the case on how this freehub body is designed. By adding the three additional pawls it now has three pawls engaged while three pawls disengaged. Thus, it reduces free play by half because there's now a half step between the next original engagement point
@FlorianErtelt
3 жыл бұрын
I have a 2020 Remedy 8 XT and wondering if I can do the same upgrade?
@mortadhaabdul565
3 жыл бұрын
What wheels do you have? You have to know what freehub you have!
@rodncru1
3 жыл бұрын
Hello, i have a Bontrager alloy, sealed bearing, centerlock, Shimano 11-speed freehub, 142x12mm thru axle. Can i upgrade it using this method?
@Jamesthebikeguy
3 жыл бұрын
Only if it is a rapid drive hub.
@rodncru1
3 жыл бұрын
@@Jamesthebikeguy thank you.
@khairulhakkimhashim9423
3 жыл бұрын
Hi James. Good day to you and your family. Do you know whether all Bontrager use the same design for paws and spring for all their wheelset? Its hard to get small parts from my local Trek dealer and I'm thinking of buying a cheap secondhand Affinity wheelset just to take the paws and spring and upgrade my rapidfire freehub (in my Paradigm 25 wheelset). So need to make sure first that the paws and spring are compatible across all Bontrager freehub. Hope you have the answer to this. Thanks in advance.
@DirtyWabbit
4 жыл бұрын
Did switching to 10-50 required derailleur adjustments? Guessing you had 11-50 previously?
@Jamesthebikeguy
4 жыл бұрын
This was a new Wheelset for me so the freehub bady was required for my build. The answer to your question is yes, you will need to adjust the derailleur
@DirtyWabbit
4 жыл бұрын
Jamesthebikeguy im also installing a new wheel set. Which is why I’m going xdrive. I hate adjusting the derailleur. Dammit
Пікірлер: 289