Appreciate you. Kids are having a lot of fun ripping around in the toy Rubicon.
@1981cvalentine
8 ай бұрын
I just did this to jumpstart my jeep and it totally worked!
@joeyrivas2555
4 ай бұрын
It works to start your car👍
@MikeHensley-sc3ns
11 ай бұрын
Would like to see 2 of the packs x18v batteries in series and actually light up…. So bright it would cook bacon in about 2 mins … well done.🤣😂 Ps you kinda have that Cleveland Brown or another character.. I dk can’t pinpoint it..
@FaithwalkerTodd
7 ай бұрын
If the light operates at 40 V you could connect your two batteries in series by connecting the positive wire coming out of one battery to the negative wire coming out of the other battery. That would leave you with a negative wire coming out of one battery and a positive wire coming out of the other battery. Those would be your new positive and negative wires. The amp hours would stay the same but the volts would double. so you would be operating at a voltage much closer to what the light requests. Volts times amps equals watts. If you connected two batteries in parallel, or positive to positive and negative negative, it would maintain the same voltage, the 18+ volts but it would double the amp hours. When you connect in series it doubles the voltage but maintains the same amp hours. But in either case you end up with the same amount of watts. And watts is what you need to use for your light. Both cases will work fine but the light might be much dimmer with just one battery operating at less than half the voltage requested by the light.
@williamblanks8500
7 ай бұрын
True..
@davidotto7666
7 ай бұрын
You're absolutely right but I got about six or seven in batteries laying around a fully charged you're absolutely right I just got done hooking one up to electric scooter myself
@williamblanks8500
7 ай бұрын
💯💯💯
@TCsDirtBikes
7 ай бұрын
My mini bike light bar is power by a dewalt battery works great
@williamblanks8500
7 ай бұрын
Awesome idea..
@RuhRohRaggie069
11 ай бұрын
I made a custom set of jumper cables for my 20 volt Dewalt & they will dam Sure start your car, but when I hook them up I move quick & of course pretty much drains the 20 volt haven't had one blow/fire yet
@user-ul2oy8zi5h
10 ай бұрын
It sure will, I jumped quite a few off with some wire I used off of something random. Hey anyone ever got the charger off a motorized wheelchair? I had two vehicles went dead after a night of partying , I hooked cables from one to the other and connected the charger to one car and crunk them both up fairly quickly, probably less than 5 mins
@mateofoscoli6374
7 ай бұрын
I have used 14/2 to jumper to my gfs car battery. It will crank once or twice before you drain the battery.
@williamblanks8500
7 ай бұрын
Yes sir.. I wouldn’t recommend for everyday use but it definitely works in an emergency.. has def helped me a few times now..
@CraigESQllc
11 ай бұрын
Don’t try it with the dual voltage batteries like dewalt with the 20/60’s… that jump got scary real fast… in the rain too
@kennethricher45
6 ай бұрын
Yes it works to start your car. It works better than any jumper pak you can buy. Instant start on a super dead car battery
@dragan3290
7 ай бұрын
It will start your car. Even a 10AH dewalt at 18 volt hooked up to the 12 volt car battery will only bring the voltage to 14.8 volt. Car battery at 100AH ? No worries
@satibel
Жыл бұрын
note that you need to match the voltage, if you try feeding a 12V device with that 20V battery, you're gonna let the magic smoke out. though you can use diodes to drop the voltage by a bit, usually you get -.6V per diode, you can check with the voltmeter. you can get diodes from old power supplies and random devices, the blocks with ~+~- are 4 diodes, and if you feed them from the - and take the voltage on the +, they'll work as 2 diodes in series and drop about 1V
@williamblanks8500
Жыл бұрын
That’s true.. looking back on the video I didn’t do a good job of explaining.. just something I thought I would try.. I thought about wiring 2 battery packs together in series to try to make the voltage needed for the LED to power on but I don’t wanna be responsible if someone tries it and burns their house down lol.. But I did want to share the idea it may be useful to someone someday..
@Angel-rf2dg
Жыл бұрын
@satibel can you drop a link to what u explained
@retrowave9491
6 ай бұрын
That is very very dangerous!!!!!!! Omg man omg
@drewdank5365
Жыл бұрын
Gunna try
@clydesdalem.8943
10 ай бұрын
Wtf. Did you just say or do. Mind-blowing go get a "service dog" that's what all the loonies are doing now😂
@williamblanks8500
10 ай бұрын
If it works it’s not crazy lol..
@anthonytalley55
7 ай бұрын
I'm trying to make a charger out of a PCB Board with two wires
@retrowave9491
6 ай бұрын
Please be safe and don't do it
@vovkaNews1
Жыл бұрын
Bro you can start your car with that shit at summer
@williamblanks8500
Жыл бұрын
If I ever need to try it I will definitely make a video about it.. 💯💯💯
@SkootchabitWoodjya
Жыл бұрын
I've done it several times with Black & Decker 20v. Use a well charged battery. Be careful. Also the first time you do it you feel like a boss.
@Truth-L-knowledge
11 ай бұрын
Lmao a dead fried fool of a boss you shall be😂
@williamblanks8500
10 ай бұрын
Didn’t make a video about it but I tried it yesterday and it worked great.. 💯💯💯
@namesurname133
7 ай бұрын
Did he really try to power AC circuit with DC source without a inverter??
@williamblanks8500
7 ай бұрын
The output of the original power supply is 37VDC.. the problem isn’t ac or dc.. the problem was not enough voltage.. I could have wired 2 batteries in series but that wasn’t the point of the video.. the point was with little effort you could convert a lot of things to run on these rechargeable batteries that a lot of people have just laying around.. I have jumped cars with them.. I have since have people say they have powered kids power wheels.. It would come In useful in a power outage and many more purposes.. the light didn’t need to work to understand how to wire something to the battery
Пікірлер: 33