Thank you so much for this video it was so helpful. I bought my 3D vinyl and I guess I didn't read the small print I was just so excited until came in the mail and I open up my box and the note said not recommend for the Cricut Easy Press. I search and came across your page and I am glad I did because I was going to count as a lost. Keep up the great work.
@meeshlvslobster
2 жыл бұрын
Oh my gosh! Thank you so much for doing this video. I too was excited to make a shirt with my daughter for my grandbaby. Not only were we doing puff, we were layering it with glitter htv. I was so caught up in slicing out the tail part (which was going to be pink puff) I looked up the settings online really quick, did the glitter bunny first, then the puff tail but it came out wrinkly (like well I can't describe it any better than it looked like a brain? lol) still super cute and it puffed but it was wrinkly. I had done 275 degrees for 10 seconds. Now I can't wait to break everything back out and try it again at 310:) THANK YOU AGAIN
@TechVdot8
Жыл бұрын
Same as the comment above. I was having a hell of a time trying to properly apply EasyPuff with my cricut press (same as the one in the video). I almost thought that the material was no good but that didn't seem like something the good ol' Siser co. would produce. Thanks for the vid!
@meeshlvslobster
Жыл бұрын
@TechVdot8 this was from a while ago but after that I heard somewhere that the puff won't work with the easy press because you can't get enough pressure. I just got a hand me down heat press and I will try it in the near future to see if I can get it to work better:) ...on a side note almost all of the samples I did with the puff and easy press fell apart after washing them about 5-6 times.
@TechVdot8
Жыл бұрын
@@meeshlvslobster yikes! The falling apart after a few washes is not very promising. I was just thinking of doing some samples as well with these settings (and sounds like maybe with a ton of pressure). I didn't buy a ton of this material but it does suck to think that I might not be able to make good use of it.
@meeshlvslobster
Жыл бұрын
@TechVdot8 I would try it with a regular heat press and wash it at least 5 times to see how it holds up before you make something for sale or something important :) just to be sure.
@MsLuvToyz
8 ай бұрын
Did it work for you?
@aziadaniels3994
2 жыл бұрын
This video saved me from wasting the walakut puff vinyl from Heat Transfer Warehouse. In my opinion, if a Cricut product can cut the vinyl then a Cricut product should also be able to apply the product. Thank you so much!
@airstyles4409
3 жыл бұрын
Thank you so much for making this vid, I was told it couldn’t be done with a Cricut press and there were no vids on KZitem about it
@JamelaPayne
3 жыл бұрын
It takes a lil work but it can be done.
@goonie4754
2 жыл бұрын
Tip: Stretch The Shirt After You Press It To Make Sure Its Durable & To Make It Last Longer
@shirleylouviere4684
2 жыл бұрын
Thank you so much for that video I bought the vinyl and was scared to use it now I am definitely going to make a T-shirt thank you.
@keylalive952
5 ай бұрын
Thank you so much for this video!!!! Have you tried puff on a sweatshirt?
@khadijabrown1560
2 жыл бұрын
Thank you for this video! It finally puffed for me. 🙌🏾
@chelleyl1103
3 жыл бұрын
Very cute! Thanks for the extra tip about the crease down the center.
@Jade-iy8js
10 ай бұрын
Great Video, thank you for sharing!!!
@TheFammissionPodcast
2 жыл бұрын
Thank you very much!!! I was ready to give up🤦🏽♂️
@briang_johnson
2 жыл бұрын
Dope. Thanks. I will definitely try this
@pamconaway5651
Жыл бұрын
Trying my first one today!
@kayh865
2 жыл бұрын
Hey Sis thank you for the tutorial it was very informative and I did make a t shirt and it came out great 👍
@JamelaPayne
2 жыл бұрын
You’re very welcome!
@jessicacorliss714
2 жыл бұрын
What brand vinyl did you use! Your tutorial was amazing and I want to make sure my project looks as great as yours!
@indiankaarnama
Жыл бұрын
You are simply amazing
@JamelaPayne
Жыл бұрын
Thank you!
@Crystalnachi
Жыл бұрын
What brand of puff vinyl did you use in your tutorial? Siser or WALAkut?
@shanayahmolina2353
3 жыл бұрын
Thank you this was very helpful!
@JamelaPayne
3 жыл бұрын
You’re welcome!
@beezydawstv7964
Жыл бұрын
Appreciate the tip much help so do yu peel warm or cold ????
@cassidyhodges8387
Жыл бұрын
Warm peel it right away!
@raushanaharnold6469
Жыл бұрын
I appreciate this video so much!! I got so excited when I ran across puff vinyl videos on tik tok not knowing my easy press wasn’t good enough lol. But this still didn’t work for me 🥴, do u know/think layering it on top of glitter HTV makes a difference?
@cassidyhodges8387
Жыл бұрын
You definitely don’t want to layer this one! Especially with glitter.
@tatiana_ashanti
Жыл бұрын
Glitter is for top layer only. It’s not meant for things to go on top of it.
@jennifergarmon7362
2 жыл бұрын
Does it have to be a towel or can you use the EasyPress mat?
@janelledeunamuno627
2 жыл бұрын
Thank you so much! Is the 3D puffy similar to siser flock vinyl?
@JamelaPayne
2 жыл бұрын
No completely different. Puff is 3 dimensional. Think marshmallow vinyl.
@sharonnjaee1747
Жыл бұрын
Thank you so much for this video 🤍. Which pen do you use for your cricut to cut on your vinyl ? I’m having so much trouble .
@JamelaPayne
Жыл бұрын
I don’t understand, do you mean blade? I use the fine point blade.
@sharonnjaee1747
Жыл бұрын
@@JamelaPayne Oh yes that’s what I meant , thank you so much .
@nancysharkey5787
2 жыл бұрын
Thanks for sharing 👍
@t.2420
2 жыл бұрын
Do you have a full video from the start to the end on the puff heat transfer vinyl
@alexgoff9296
10 ай бұрын
Thank u Rock Star
@YoungThrilla1
Жыл бұрын
Fireeee ❤❤❤❤🎉🎉🎉🎉🎉
@ThatManFave
3 жыл бұрын
What puff vinyl do you use???
@kimberleywalker7377
Жыл бұрын
Can you do puff and regular htv on same shirt? Not talking layer just like one word puff and rest htv
@make-upandmommyhood7072
Жыл бұрын
Yes, but do the puff last because it's the most sensitive.
@jacquelinebanda7214
2 жыл бұрын
Awesome video! Thank you 😊 what setting did you use on the Cricut?
@JamelaPayne
2 жыл бұрын
I just used the vinyl setting.
@jacquelinebanda7214
2 жыл бұрын
Thank you! I will try that. I had used the iron on setting and it didn’t cut through, I couldn’t peel it.
@2tone3nineduce
2 жыл бұрын
What do you select before you cut the vinyl?? Do you just select regular vinyl or what I’m having a hard time??
@JamelaPayne
2 жыл бұрын
I use regular vinyl. What kind of trouble are you having?
@NLChenet
2 жыл бұрын
Can you use the puff vinyl with regular vinyl?
@dionneyoung190
Жыл бұрын
Hi. Can you sublimate on white puff vinyl?
@deanturner1865
11 ай бұрын
Hoq long does it stay on for 🤔🤔
@irohbello9819
2 жыл бұрын
To get a smoother result do 320° for 8 sec but put a pillow underneath the garment and put the pressure verry strong thats important.
@leroymiller2657
Жыл бұрын
Can you explain how to get stronger pressure
@irohbello9819
Жыл бұрын
@@leroymiller2657 yes of course. So if your machine doesn't let you adjust the pressure, you can add a teflon pillow or fold a shirt in a square a little bigger then the design then press.
@idareyoutolove
2 жыл бұрын
Perfect 😍
@thenewcooldotorg2823
7 ай бұрын
nice
@michelleharris8951
3 жыл бұрын
I have some questions to ask you about a project I have been trying to get started please, call me when have time . Ty
@ButtaflyyGarden
2 ай бұрын
Link no linger works to purchase the SVG😢
@YOQishere
2 жыл бұрын
Dope!
@gracielalucio372
Жыл бұрын
Can I use puff vinyl on polyester?
@quillajefferson8110
2 жыл бұрын
What the name of the vinyl you used?
@mikemoal2060
Жыл бұрын
Some of my 3D puff doesn’t puff up I have even pressure any idea?
@jjjj5572
3 жыл бұрын
How do I place the vinyl on the matte b4 the cut out shiny side on mat and matte side up right?
@dam.s
2 жыл бұрын
When cutting any heat transfer vinyl (for T-shirts or other fabrics, etc.) the adhesive side is face up and the "good" or front facing side is laid down onto the carrier sheet. The carrier sheet is the part you want down touching your mat so that you may cut the adhesive side (in *mirror*). This may be verified with any piece of vinyl, PSA or HTV, by peeling a corner slightly. The transparent sheet is the liner or carrier, either static or sticky, and this goes down on the mat. Putting the liner down on the mat ensures that a "kiss cut" on the vinyl material will cut through the material itself but not all the way through the carrier sheet on the bottom. With PSA, the decal is peeled from the carrier, where the adhesive is now exposed. With HTV, the whole design is flipped over and pressed, activating the already-exposed adhesive. The carrier sheet is then peeled off (and also acts to protect the press surface).
@lstrubbe67
Жыл бұрын
How long did you make your saying
@thecrystaljexperience
3 жыл бұрын
Super cute but what’s the purpose of the towel
@JamelaPayne
3 жыл бұрын
The mat is too fluffy.
@thecrystaljexperience
3 жыл бұрын
@@JamelaPayne oh ok thank you ma’am
@tnicolec90
3 жыл бұрын
Is it suppose to puff up and be smooth or small bumpy squiggles?
@JamelaPayne
3 жыл бұрын
Smooth. If you have squiggles you need more pressure.
@ourlife7999
3 жыл бұрын
@@JamelaPayne if you get the squiggles, do you lay a teflon sheet down and press it longer til you get the smooth?
@JamelaPayne
3 жыл бұрын
I never tried to double press.
@ourlife7999
3 жыл бұрын
@@JamelaPayne Ok I feel confident enough to test it out!
@jasminewilliams4840
3 жыл бұрын
Ugggghhhh the squiggles love me😭😭😭
@amd23lovinglife
3 жыл бұрын
So you don’t neeed anything in between the press & the vinyl when your pressing ?
@JamelaPayne
3 жыл бұрын
I usually don’t, the transfer paper is enough in my opinion. But it’s mostly whatever you’re comfortable with.
@MsBrianna66
Жыл бұрын
Mines still come out wrinkled even with all pressure
@uhlayy
Жыл бұрын
Which cricut machine is this?
@lifeewithjuju540
2 жыл бұрын
hey how did you get your design on the puff sheet ?
@JamelaPayne
2 жыл бұрын
I don’t think I understand.
@babytenup
3 жыл бұрын
What is the base material?
@88Cohiba88
2 жыл бұрын
Nice to the point video. 1 thing speak a lil louder. thank you.
@jordankrueger6164
2 жыл бұрын
What brand of puff vinyl?
@JamelaPayne
2 жыл бұрын
WalaKut there is a link in the description.
@PrettyLifeQueensKing
2 жыл бұрын
🙏🏽
@laurenflem6981
Жыл бұрын
Have you every tried to remove puff vinyl from a shirt?
@omglilstunna6954
2 жыл бұрын
What is you want a bigger logo
@JamelaPayne
2 жыл бұрын
I don’t understand the question.
@omglilstunna6954
2 жыл бұрын
@@JamelaPayne what if you want a bigger logo how can that be made and what size map would you need
@dreezyfranklin
2 жыл бұрын
You probably had so much trouble because it is possibly walakut puff. That stuff is terrible. Econopuff is they way to go. No testing needed
@carlyaustin6762
3 жыл бұрын
It doesn’t look like it was pressed enough with it looking there’s space between the shirt and vinyl
@JamelaPayne
3 жыл бұрын
There’s no space, it’s puff vinyl so it stands up off of the shirt.
@carlyaustin6762
3 жыл бұрын
Oh I know it’s just the angle of the picture it looks like.
@JamelaPayne
3 жыл бұрын
I angled it that way only so you could see the puff. 😊
Пікірлер: 101