@@Aciimovmy coworker has been working for almost 35 years and has top of the line tools. You wouldn’t be able to tell, aside from scratches that his tools get used daily because he’s meticulous on keeping them clean!
@looneyplays
Жыл бұрын
Thats cool only thought there was normal and single swing arm thanks for this dude buying one rn
@stacys3857
Жыл бұрын
Abba stands are great too if you need to do suspension work. Price is a bit more but I love mine
@chrismaldonado231
2 ай бұрын
Key words there “15yearsago”” geeezzzz I’m sold next check I need it too rn lol thanks for the info man your work is amazing
@harshituppala5535
Жыл бұрын
Wow!no shots at gsxr riders today. I was really expecting one after the equipment portrayed
@Ghostsoulless
Жыл бұрын
“You have to buy a bunch of these pins. Unless you’re a gsxr rider, in which case you have all the sizes you need.”
@user_name_redacted
Жыл бұрын
I just used the bike's centre stand and balanced a 20L jerry and some big garden pots on the back seat. Saved a few hundred bucks
@jake88ci
11 ай бұрын
pit bull is good german made bursig are best . pin goes into center frame pluf ..lifts entire bike/both ends off the ground and you then can roll bike around garage if you want or lock wheels cost 300$
@time2maked0hnutz54
11 ай бұрын
Love those Joints, they're Pricey but Worth it💎🤙🏽
@Burnzi85
Жыл бұрын
Wire tie is brilliant, need to get one asap
@hagenseymour6193
Жыл бұрын
I was WAITING for the Gsxr joke
@ChrisSauer-oe5ve
Ай бұрын
lol me to 🤣
@YungMorris00
Жыл бұрын
Just find a friend that welds and make one for much cheaper. Just take a good loook to be able to properly copy the design
@andresmontefusco6840
Жыл бұрын
I got my front and rear Venom stands with a front head pin stand for 70 bucks. Used market pays off!
@outkast937
Жыл бұрын
I could build one of those pretty easily, and oof the fairing 😢
@Whiteshadow236
Жыл бұрын
Good, but the forkseal could be damaged in a while
@yiannishayabusaofficial
Жыл бұрын
AWESOME SUPERB TOP
@benargee
Жыл бұрын
Nice idea, but I think manufacturers should have a clip built in for that.
@pratiq7
Жыл бұрын
No mention of Gixxer though
@lunear5349
Жыл бұрын
Gixxer rider also use it as a seat
@Jason.1999
Жыл бұрын
Hey man I love your Videos! I'm in a slight dilemma rn I have an opportunity to get a ZX900R from 2001 very fine condition for cheap or save up a little untill the end of the year and get a Z900 (sidenote) my mum would kill me if I got the ninja .... soooo I don't know what do you think ? thank you in advance
@allintrading5458
11 ай бұрын
"I made a wire tie so it wouldn't fall on my foot anymore" what a Gixxer rider thing to say.
@adobomoto
11 ай бұрын
What’s with all the old people on youtube?
@blandrooker6541
Жыл бұрын
Yep, put together the hybrid Pit bull stand out of separates last year, all told $375.
@junilcajilig8039
Жыл бұрын
Idol, i love your videos.
@primonccelli4249
Жыл бұрын
sorry but i see you can not remove front wheel as you say with this stand.
@blandrooker6541
Жыл бұрын
Sure you can. The pinch bolts are accessed from the bottom, and if you have to the axle nut can be removed or loosened before lifting as well as the calipers. After installing the front wheel, you have to drop it off the lift to bounce seat the pinch bolts for final tightening and the axle nut and caliper nuts can be torqued to spec.
@bobhill2057
Жыл бұрын
@@blandrooker6541thank you, i was going to comment, but you were first
@cyonfr1458
Жыл бұрын
Is it universal, or does it risk damaging the front plastics of some bikes? Thanks!
@ironken1796
Жыл бұрын
Sounded like the headlight, fairing doohickey was straining a bit cause the stand didn't clear correctly. I can see their usefulness at the track tho.
@512460
Жыл бұрын
@adobo What's your thoughts on those centre lifts? I believe brand like bursting and constants do them
@williamnave6953
Жыл бұрын
One of my buddies works at pit bull. I almost took a job there machining the stands 😆
@JOEBOWERY
Жыл бұрын
I need to get one or two of those *blush* ❤
@PerciusLive
9 ай бұрын
Is the headlift stand suppose to have the nose rest on the arm as well?
@alfredoarizmendi1648
Жыл бұрын
i see some good ones go for 100-200
@Taking_Care_Of_The_Business
Жыл бұрын
Thanks
@troypace4495
Жыл бұрын
Can you use stands on a cruiser
@bladerances5467
Жыл бұрын
Bro pls review the EVO helmets which is auper popular in Philippines
@edwardjoseph1509
Жыл бұрын
Wtf those helmets are just bunch of chinese helmet rebrand. Nakakahiya 🤮
@huh3526
Жыл бұрын
never would've guessed that thing is 15.
@Bramba86
Жыл бұрын
I'm surprised you didn't make joke on Gixxer bruh hahahahahaha
@VictorGreed0
Жыл бұрын
Stupid question ⁉️ Meron ba nyan po sir universal for a honda rebel 300?
@XSR95
Жыл бұрын
Early AF just scrolling
@asdad10101
Жыл бұрын
Same
@Jyrae27
Жыл бұрын
the old reliable aluminum wire very filipino
@sjjvddyumiherhv3709
Жыл бұрын
You forget to mention that gixxer riders can have multiple use for that stands
@gbeving3167
Жыл бұрын
I use a headlift at work all the time
@ldslao
10 ай бұрын
One of your few shorts that doesnt mention and degrade gixxer.
@MarkSmith-oy1dn
Жыл бұрын
I prefer to just the side kickstand😅
@iulianlazar8893
Жыл бұрын
Kinda looks like you couldn’t remove the wheel or do any good work with it because the thing covers all the bolts. But it looks racy. Good for gixers.
@mahavirmalhotra5909
Жыл бұрын
Wich bike is that ?😅
@Just2Fast4U
Жыл бұрын
Amen on that bastard falling on your feet. Leaves a bit of a mark when your being an idiot like we all do sometimes and wear sandals to work on the bike. 😅
@thetroll8655
Жыл бұрын
I used a rear stand without spools. Bike tipped. Buy spools
@lazhiey
Жыл бұрын
im surprised there was no gsxr butt plug joke😂
@mr.whiskers6273
11 ай бұрын
I mean a center stand is all I need
@senpie7563
Жыл бұрын
Where's the gixxer punch line
@tinker2435
Жыл бұрын
I now want a Gixxer just because of how much this dude hates them.
@olesmokey394
Жыл бұрын
I got my 2005 gsxr 600 for 4200 cash had to put about 1000-1500 into it steering dampener was falling out the barring was so bad rear brake was non existent fork seals were leaking bad on one side to the point I had almost no front brakes either got a nice chain and sprockets aswell and a battery.
@tinker2435
Жыл бұрын
@@olesmokey394 nice pretty good deal I flipped a Honda sl100 for 1000 dollars so we are gonna see if I can afford a better bike than a model from 1989 😂
@olesmokey394
Жыл бұрын
@@tinker2435 hahaha forsure man it all takes some saving but worth it for sure.
@Gear_Head_Ed
Жыл бұрын
I just got to know how many times it fell on his foot to the point where he was like I need to make a wire tie
@bmint
3 ай бұрын
That looks like a pawn shop price tag..
@andrewuithaler5928
Жыл бұрын
I’m disappointed, no Gixxer joke, what’s up?
@dogbizG
Жыл бұрын
Wish pitbull expands to europe.
@johnny5259
Жыл бұрын
Just like food, water and gas. If it's very useful government/ greedy people will find a way to make it more expensive....
@jvillain9946
Жыл бұрын
A normal pitbull front stand is $400
@rosiethecocktail3640
Жыл бұрын
Where’s the gsxr joke
@duroehre1000
5 ай бұрын
Just bought one... 90 Euros...
@VehicleLivesMatter
10 ай бұрын
The bike gets a chin rest :3
@plopkoek5423
Жыл бұрын
a short video without gixxer diss
@mjrdanishdestroyer01
Жыл бұрын
Oh yeah, what happened to the Kawasaki you had? I've only seen it once in your videos but not anymore
@boostingaddict
Жыл бұрын
They also don't work on every bike
@quattro2004
Жыл бұрын
Looks like it doesn't work on this bike either, it rubs on the body work at the top.
@ousimanie1869
Жыл бұрын
$400 for a couple welded pieces of metal with wheels and rubber on it? Insanity
@JOEBOWERY
Жыл бұрын
Going to start with just areas stand and thinking PitBULL 🎉
@Gear_Head_Ed
Жыл бұрын
Because I’m ngl I’d be pretty heated after the second or third time
@blownhonder
Жыл бұрын
I thought he was gonna say that pin for the headlift doesn't belong in a gxrs as$🤣
@justinr86
11 ай бұрын
Need to find that pin# 😞 lol
@Tijmen.W
Жыл бұрын
No Gixxer joke?
@JusBlazeGSXR1000
Жыл бұрын
That will work better on a GSXR
@tkllll7830
Жыл бұрын
It wouldn’t matter if it fell on your foot if you weren’t wearing slides like a gixxer rider. Lol.
@JLP_710
Жыл бұрын
Mine shoved into my front cowl 😢
@camperxgaming521
11 ай бұрын
I can just make that thing by a local store for only 50$ 🐸
@Carsjdm987
Жыл бұрын
He did not make the gixxer joke so I will Gixxer rider love these stands so they get put it up there Ik Ik it’s not the sand it’s better when he does it
@raheelyaser8987
Жыл бұрын
Tou Chinese?
@frankiesummers21
Жыл бұрын
Bruh u fkn up yo fairing up front
@inglegaming1901
Жыл бұрын
So many gsxr jokes missed with this one. Disappointed.
@robertkilley2389
Жыл бұрын
you got ripped off by pit bull. when I bought my front head stand it came with 5 or 6 different size pins.
@icorteezzyy9387
11 ай бұрын
Gixxer riders use their mama as jack stand because their mama is used to getting plowed from the bottom. Gixxer riders still doesn’t know who their father is
@nauuwgtx
Жыл бұрын
Bro the stand is touching the fairing 😑
@FERO6160
Жыл бұрын
No gsxr joke 🤣
@vasusonekar1955
Жыл бұрын
Only a non American heart can do this type a "I Made a wire tie thing" a real American would proudly go to nearby all purpose store and buy a well crow strap just to tie that shit up 🫡🥰
@violenttooladdic
Жыл бұрын
Bro I literally just built a contraption with pipes to lift it from the frame to do my seals, 🥲
Пікірлер: 96