Thank You for choosing RHYOBI! I purchased the Hedge Trimmer and am amazed that it can cut tiny " trees" and branches. The battery lasts over 30 minutes. No more hooking up 400 feet of chord or worrying about cutting the chord.Im up to owning 6 different tools and growing.
@mofomoco
9 ай бұрын
I am going to go play with my tool right now!
@anthonyohare2268
3 ай бұрын
Oh, you found your tweezers?
@bandersnatch5864
Жыл бұрын
I clicked because it was a woman talking about the tool (and as a woman looking ti use the tool, I liked this). I lingered because of the sexy RYOBI tool wall behind her. I stayed (and hit the Thumbs Up) because of the information. Great job!
@shannonevans4892
Жыл бұрын
Yes, girl! Cheers to that! You’re in the right place because RYOBI certainly recognizes people, not genders. I am honored to be in this place, as a woman in the DIY world! 💚💚💚
@ivymora18
Жыл бұрын
The multiple tool is amazing, I used it recently with the sanding attachment to get in to a corner while adding board and batten to my office.
@EdwardLennox-m6j
8 ай бұрын
The video fails to show how to install an accessory on the standard multi-tool. To wit: How to release the mounting, install the accessory the correct way around and correct alignment, secure and check for safety before use. The Manual also does nor show how to do this. I'm still searching the internet.
@randallmacdonald4851
7 ай бұрын
I can install and uninstall but in use, the hex screw comes undone and the blade unlocks. This is extremely dangerous. The hex screw has no preventitive for unscrewing.
@thenoodlebuddy
6 ай бұрын
Same I've just bought one from Amazon and instructions are useless and blade keeps falling off. Don't understand what I'm doing wrong. It is just a nut that you lock in place using an Allan key
@mikelowery482
4 ай бұрын
Hahaha.... don't buy a tool you have no idea how to use. I probably saved you 10k 🤣🤣🤣.
@RetroMTS
22 күн бұрын
@@mikelowery482what if you were gifted tools lol
@DaveWray-d9n
Жыл бұрын
dont need the music.
@Nyle95
Жыл бұрын
Very informative video, thanks! I'm slowly building my Ryobi collection... So far I have a combi drill, impact driver, glue gun and have just ordered a SDS drill. Next on my wishlist is a multi-tool, caulking gun & heat gun.. By the way, Shannon you are 🔥🔥🔥.
@iGoldeneYe
Жыл бұрын
Great Video! Didn't know what this tool was/did until I saw your video. Cool Tool! Thank you.
@Grimreaper45705
10 ай бұрын
I look forward to buying one , after doing a lot drywall and cutting by hand and having to use a chisel and hammer for trim this will be a nice addition to my tools
@geolebline7556
Жыл бұрын
I haven't even taken this out of the box until I watched this today ..I had no idea what it was used for..(2 years later)
@joshisennagle7272
Жыл бұрын
Father loves it
@HyperactiveNeuron
11 ай бұрын
I wish I had the extra money to get the brushless model when I bought mine. The tooless blade change and switch instead of the trigger would suit me much better but it was like a $50 difference at Home Depot at the time so no thank you. I can't even get someone to unlock the cages to buy a battery. Sadly when my Ryobi batteries die, my tools will probably get replaced one by one.
@xungngo
Жыл бұрын
Is mine a defect because I really really have to try hard (with 2 hands) to turn it on/off. It's frustrating because I love the tool and everything else. Right now, it's actually a dangerous tool to use since on and off requires a lot of effort.
@cusimilooking4965
Жыл бұрын
So how do I get close to the ceiling so I can cut the drywall that leads to it? The rotating circular blade won't let me do it. Do I need to change to a different accessory?
@timobrien7797
6 ай бұрын
How do you use the hex?
@ChristineSCreates
Жыл бұрын
Would love to win the tools with Christina M, she inspires me and so do the tools!!!
@fooddude9921
9 ай бұрын
Which blade is used to cut tile and concrete? Your advertising says this multi-tool can cut these items but none of your literature is specific on which blade is the one to use.
@tanjunenow
11 ай бұрын
Where is the r18mt sold ?
@Jretropie
10 ай бұрын
what speed you should set when you are cutting nails.
@Amy-abc
Жыл бұрын
She didn’t show how to replace the blades on the standard model. I’m still confused. 😕
@kaylaspiroff6156
11 ай бұрын
I wonder if it’s because the standard blades keep coming loose from the vibration. I just got mine today and the blades keep coming undone after about 30 seconds. I’m returning and getting the brushless for this exact reason.
@randallmacdonald4851
7 ай бұрын
@@kaylaspiroff6156 Unfortunately, mine does the same thing. This is dangerous. Also, I got mine a couple years ago and never used it until today. What a mistake the standard model is. And I can't return it.
@albireo-d1b
Ай бұрын
A woman who knows the tool she wants and how she wants to use it. Importantly knowing how to turn it on and use a two hand grip on it. What's not to like 😊
@21thTek
Жыл бұрын
love the video !
@stonekold
Жыл бұрын
only issues I had was manual has ZERO info on speed settings or a chart and none of the blades can go through a 2x4 because they are too short except for Harbour Freight 1-3/4 in. Bi-Metal, not for wood.
@nicci24
3 ай бұрын
I have a brand new Ryobi multi tool and the blade just loosens and falls off the second you try to use it
@jimcunningham6146
3 ай бұрын
The video as usual is misnamed. It shows mostly obvious instructions and 5 or 10 seconds of how to actually use it.
@lifeofafixer9101
Жыл бұрын
Just had my second one stop working within 2 days, maybe used for 5mins each tops. Do Not Buy
@hornet224
26 күн бұрын
She bounces on her heel while talking.
@-maccabee
2 ай бұрын
Thanks for not covering anything about the standard model.. 🤡
@nathanmciver6496
2 ай бұрын
I think one thing every house can agree on is that never once should any part ever go missing for any polotical non sence! Not even once! Why is this? What does that accomplish? And secret borrowers don't count! Why is this?
@alsparker7761
Жыл бұрын
would love this item to come in its own case with room to store its blades
@CorgiDaddy
Жыл бұрын
I used my Ryobi multi tool to remove old kitchen cabinets and when I installed wood flooring. It's a handy tool to have around and worth the investment.
@aresorum
17 сағат бұрын
What are the model numbers on these? Why did Ryobi not present the model with tilt-head?
@simen4613
8 күн бұрын
Nice informative video, but find the music too much.
@bcreason
10 ай бұрын
I’ve got the bastardized system. Ryobi handle and battery, Rigid multi tool head. I’ve a whole collection of Rigid heads for that one Ryobi handle. Multi tool, saws all, right angle impact, right angle drill, right angle ratchet. It’s a pretty good set up for a home owner. Cheaper than buying complete tools.
@R3Quency
Жыл бұрын
Yeah it’s great but mine broke snapped off at the oscillating head while fitting the kitchen? Not even two years old.
@ryobiguydiy
Жыл бұрын
I have the HP multi tool and it’s been awesome for furniture work! Especially when I need to sand in tight spaces or remove small pieces of wood.
@stevenwagner9912
10 ай бұрын
I was sent one of these instead of the circular saw I ordered. Thought I'd just try it. So far I'm not impressed. Tried to cut a 2 by in two.
@5724-d8p
3 ай бұрын
Love the music. Gonna play this for my first dance with my lovely bride.
@megandd1797
8 ай бұрын
I didn't get any of these tools that are supposed to go with it!
@beemercycle
Жыл бұрын
Does the saw have a depth stop? I.e. a depth guard to keep you from cutting too deep?
@franceswatts4001
6 ай бұрын
Put a piece of masking tape round the blade with the top edge at the required depth. When the material you are cutting touches the tape, you are at the correct depth. Same way you would do with drill bits.
@NotSoLiberal
6 ай бұрын
Ryobi never disappoints. Most terroble documentation
@markzanetti6228
Жыл бұрын
what model? RYOBI PCL430B ?
@louisschaefer-cg3cn
5 ай бұрын
my blades seem to come loose alot, I have the brush model
@BarbNapier-uc8pp
Жыл бұрын
My multi tool does not have the release mechanism to change attachments. You have both sitting there on the video and didn't show how to change the other one. This video is no good to me!🤨
@ankewynmalen1186
10 ай бұрын
Mine also does not have the release mechanism but if you look at the base of the tool just above the battery, you will find a little hex tool slotted in position. Use that to loosen and tighten the screw thingy where and when you change blades.
@TV-so2ej
8 ай бұрын
Don't throw away the instructions. They are very clear on this, and it's quite simple.
Пікірлер: 63