Those wanting the shirt I'm wearing, here's the link: teespring.com/shop/white-logo-electrician-u-shi?tsmac=recently_viewed&tsmic=recently_viewed
@ElectricianU
5 жыл бұрын
I've noticed some of their shirts have printing issues, so if you have a shirt show up and the ink is misaligned please let me know and I'll get you a new one - dustin@electricianu.com
@davidguzman8243
3 жыл бұрын
@@ElectricianU 00ll pop pop
@MeachMeacham
3 жыл бұрын
I just want to say, these videos are very well done. I’m going through them to send to some of our apprentices. You address the audience in a way that speaks to seasoned vets, and green guys alike. You remind me of Alton Brown when he did Good Eats.
@Gruntled2001
5 жыл бұрын
As a sparky, I know this, but I can't stop watching!
@shawnwaterssw
5 жыл бұрын
Same here.
@rahj1365
4 жыл бұрын
Hahaa same!
@cheynebest7028
4 жыл бұрын
Looking for holes
@cipher1167
4 жыл бұрын
It’s always good to know more and new methods!
@alex-gu3rn
4 жыл бұрын
Same even watching how to install a plug
@noelv1976
3 жыл бұрын
Yooo…just starting out as an electrician and that last tip on wire nutting a black and white is pure genius! Wish I thought of this last week.
@petersidhu8721
2 жыл бұрын
you are probably one of the few electricians on KZitem that explain how stuff works.
@SouthwestIndustrialElectric
4 жыл бұрын
Thank you for being one of the only instructional video makers to actually wear the PROPER PPE!!! too many amateurs out there :)
@captaincanuck4576
3 жыл бұрын
Well,he is working live after all.
@BearStar1
3 жыл бұрын
“Two atoms walk into a bar. ‘I’ve lost my electron,’ one says. ‘Are you sure?’ asks the other. ‘Yes, I’m positive.’”
@eddiew2325
3 жыл бұрын
HIV positive?
@wackyweyland8857
Жыл бұрын
🥁
@jerrodrobinson2913
Жыл бұрын
AH-AH-AH....
@danielelise7348
11 ай бұрын
You can see yourself out!😆
@seansmythe7543
5 жыл бұрын
This is going to be a great series! Happy to watch and learn from you Can't wait for the next one⚡⚡
@ElectricianU
5 жыл бұрын
Thank you! I hope you're right :)
@danielnussbaum3777
4 жыл бұрын
Hey Dustin Just so you know for future reference, you can use the resistance meter on a heating element's phase and neutral as an example of showing a higher resistance. Which is actually really useful if you are a putting a timer for a boiler that is in another location and the circuit box is in another location, you can use the resistance meter on the phases and neutrals to locate which one give off approximately 25 ohms which would be the boiler, and which phase and neutral don't really show any resistance to locate the phase and neutral that are coming from the circuit box.
@Stones_Throw
4 жыл бұрын
As an electrician and electro-mechanical technician that "tester" does 99% of task I need to perform.
@jeffmarschand4237
4 жыл бұрын
Been a maintenance tech at my company for 5 months now, boss is having me learn the electrical side of it got the uglys electrical reference book and just got my T-5 1000 meter today. This meter is awesome and will help me learn to trouble shoot electrical panels / boards with ease pretty simple to use.
@beeps7
5 жыл бұрын
Never heard of the car in traffic as an analogy for ohms. Its a good one, i like it.
@cjvillarreal217
3 жыл бұрын
Really enjoy your videos, I just got my Apprentice license and can’t wait to get started. Can’t thank you enough for the videos, super helpful!
@GLENN1950ify
4 жыл бұрын
This forum and this lecturer is probably the best out today. I've been doing this work in many different forms. This gentleman is good. I suggest that every youngster i take under my wing watch "ELECTRICIAN U"
@theodoredugranrut8201
2 жыл бұрын
We think you all do a great job explaining. We learn new things without even trying. Thanks.
@Aepek
5 жыл бұрын
I’m glad your back at making vids & the new set looks great. Hope all moved in & setup(of course...will never be 100%😉)..... Looking forward the reviews on the meters....love those vids See ya on the next one✌🏼
@JoshOntko
3 жыл бұрын
I'm transitioning to a Mechatronics Tech with NO electrical background. Your videos have been amazing. Thank you. I've watched this one multiple times. thank you.
@ThePeachyCarpenter
5 жыл бұрын
Been waiting for you to do this one. Really informative. I have a southwire multi but hope to get some flukes in the near future.
@juansaldana84
5 жыл бұрын
Glad to see u back amigo!! Great video
@jackK5FIT
Жыл бұрын
Thanks for the video. I just got one of these testers and no manual so I'm watching to pick up neat tricks like having one lead held at the top of the meter and the other in one hand. No more three handed testing! I am a Ham operator so most of my testing is 12-14 volts, low amps and ohms. This tester seems perfect for my needs. BTW both my sons have been journeymen electricians for over 20 years. Thanks again.
@Amraam187
5 жыл бұрын
Great to see you back at it!
@markblanc5993
3 жыл бұрын
You the man you helped break down electrician...ity for me to digest. Feeling confident to tackle some projects without frying myself. Ditched my Klein contactless tester after a few false negatives not fun
@markdickins6237
2 жыл бұрын
Great job Dustin. You’re a natural teacher. Thanks.
@scionsfiction6869
5 жыл бұрын
Rogers tech here 😊👍 (Dallas Texas) Great video's, keep em Coming "Safety first"
@ElectricianU
5 жыл бұрын
I’m out in VA with a group of you crazy kids right now.
@blakemcmahan3960
2 жыл бұрын
You got my subscription!! You know your stuff! I’m a new electrician, so I’m looking forward to the journey!
@Clubskunk
5 жыл бұрын
Very informative brotha, keep up the great videos, love your style of videos and teaching straight to the point. 🙌
@shawnwaterssw
5 жыл бұрын
Excellent video,Straight too the Point. Also the T5 1000 is one of my Favorite Meters.
@Crazylightwala
3 жыл бұрын
kzitem.info/news/bejne/jnmq0mSrqXR2i2k Here is Fluke Ts-1000 for you sir
@farstrider79
Жыл бұрын
Great explanations. Cracked me up when you were showing things in the disconnect box, in over twenty years of construction, I've never seen anyone other than line workers wear that much gear🤣
@BroaderMindsTV
4 жыл бұрын
My brother just gave me a fluke t5-600! I love this tutorial! Thanks brotha! Having problems using connecting a light switch outlet combo. In my house that has old wiring
@seanile
2 жыл бұрын
Great video, I see a lot of people had suggestions on measuring resistance. Here is an idea that would work great on camera. Take a pencil and a sheet of paper and make a heavy graphite line. You can test the resistance of the graphite at different distances on the paper. Thanks for the excellent content.
@Highvoltagehands909
5 жыл бұрын
Good tutorial video always good to cover basics
@luishuizar87
5 жыл бұрын
U make this look to easy.thanks please keep posting
@leelemon3373
Жыл бұрын
Hi Dustin. Just did my homeowner yearly review. Thank you
@nicolasauringer5615
4 жыл бұрын
Extremely helpful Dustin. Thanks man!!
@matttyler390
3 жыл бұрын
Loved the last tip about finding your un-labled run to the panel , I wish I thought of that when it happened to me now I know!
@samconrad4005
3 жыл бұрын
A lot our wires are singles. So, we ground them to figure out miss labeled/unlabeled wires
@mattbradford1135
Жыл бұрын
Super interesting! This is all new to me. Thanks for the great information.
@frankfahland6861
4 жыл бұрын
Dude...I've had one of these forever...never used it. Didn't know how. Didn't know the "why" to all of this electrician wizardry. You asked for comments...here goes: When describing the Fluke T-5--600, I wish you would show SEVERAL examples of how , when, and why you use that device....what information it is telling you. Also, slow down ever such a little bit. I take notes like I did in college. You're one of those professors that talks faster than a guy can write. Other than that....that was a killer good video. You are an excellent instructor. Just because a guy has a Ph. D, doesn't mean he can teach. Great teachers are hard to find. Your message is very believable. People listen when you speak.
@BudaMac
4 жыл бұрын
Great channel!!! Gotta start bing watching all your videos to sharpen up on my craft 🔥🦾
@Jasoneric231980
3 жыл бұрын
SAME HERE!!!
@sethturner298
3 жыл бұрын
Thanks for all the info! I’m wanting one of these flukes for my shop!
@articaprodz
4 жыл бұрын
you got my respect brother wonderful work on these videos!
@jamesipad204
5 жыл бұрын
Right on! Looking forward to the next video!
@alwynebenjamin218
5 жыл бұрын
Thanks your videos teach me some stuff i never knew like how to use clamp on the clamp on multimeter
@jeromebarrett8016
3 жыл бұрын
You explained that very well 😊, Thanks for sharing.
@mike718nyc
2 жыл бұрын
Wow very simple explanation love the video
@mariodiaz1385
2 жыл бұрын
Very well sprained thank you
@BearStar1
5 жыл бұрын
That Spike in the Current reading when You turned on the Shop Fan is called '' In-Rush '' Current , which is common on Motors and it can be as much as Six Times the normal current of the device being used
@ikerivers1795
5 жыл бұрын
Even higher than six times
@CM-oy2kd
4 жыл бұрын
Correct
@ryanb1874
4 жыл бұрын
That means the resistance is lower for that duration or no?
@jarinjones5349
4 жыл бұрын
Thanks for giving me something productive to do during quarantine and can’t work!
@oldcatmech
Жыл бұрын
I like your channel, alot! But at 3 ohms because your fingers are toughing the wires as well that could be the resistance is your body!! Took my fluke 87 and grabbed both leads and got 1.6 to 2.7 ohms, just giving you a bad time!!! Keep up the good work!!
@harriglnola7655
3 жыл бұрын
I need this video! Thanks so much. It is very well done.
@moderntouchfurniture
2 жыл бұрын
Excellent video, thank you!
@tzgtaggressorpro3143
5 жыл бұрын
Good video. Good editing. Good sound. 👍👍
@jmrgoldable
Жыл бұрын
Thank you so much!!! Knowledge is power!!
@rick3301958
2 жыл бұрын
Amazing video. Love it!
@glenjamindle
5 жыл бұрын
Video idea: Using a megger and why it's done.
@Eddy63
5 жыл бұрын
Glad your back , I'll call off the search party ... Lol ... Good vid ...
@justinfletcher8816
3 жыл бұрын
appreciate the time and effort man
@choyvong6843
3 жыл бұрын
Wonderful teaching !
@joshuadelledonne2102
2 жыл бұрын
Great Job man glad your doing what your doing
@pep122088
3 жыл бұрын
Thanks bro that was very helpful
@gilzr473
2 жыл бұрын
Great video thanks for sharing 👍👍
@PastorBillwillard2147
4 жыл бұрын
Great Job Dustin and no profanity. Excellent instruction
@arab5911
2 жыл бұрын
You are so good at explaining bruh
@Automationacademytv
4 жыл бұрын
Thanks for making more videos very informative, I am new to KZitem video making and ur video inspired me
@hectordaniel30
3 жыл бұрын
Thanks for all of your knowledge God bless you.
@jellovis
5 жыл бұрын
Nice vids. I'm working as an Electrician in Austria and it is really cool to see how things are done differently but still the same. I was wondering if you could make a video about the maximum amount of devices you can add to a circuit breaker and why
@cheynebest7028
4 жыл бұрын
You can put 12 receptacles on a 15 amp breaker and 30 lights at 50 watts a piece on a 15 amp breaker thats all dependent on the lighting fixtures youre installing. Thats all at 120/240 volt in north america.
@JaronPope
4 жыл бұрын
Thank you Dustin! You are the man
@jaimesanchez1847
2 жыл бұрын
Great job Yong man God bless you
@stevenwilliams6638
2 жыл бұрын
Great video!
@michaelinzitari5405
5 жыл бұрын
Probably not the first to comment on the arc flash gear. Salsbury/Honeywell makes all the ppe I use. I've never used it on a 200 amp QO panel though. Switchgear, yes. Btw, love your videos, been a spark for a long time now and it's good to see how other people do things. And the T5 is the meter I buy for all apprentices that get assigned to me.
@ElectricianU
5 жыл бұрын
Ya I normally don’t use it either for something so small but sponsored videos they get to have a little say on the outcome of the video. And they wanted PPE lol
@zekec3243
3 жыл бұрын
Thank you sir your video was very helpful
@Rooster000
4 жыл бұрын
where were your videos when i was an apprentice lol still good videos to watch.
@lepadus7926
2 жыл бұрын
At 5:10 I realized I don’t need to mess with this tool when I saw what he was wearing. Respect!
@naphtal
4 жыл бұрын
Continuity is important to check audio cables. Very useful for PA system techs.
@Crazylightwala
3 жыл бұрын
Well explained and really impressive 👍
@coryskinnon
5 жыл бұрын
Love the new set!!
@ElectricianU
5 жыл бұрын
Thanks man, I'm actually decorating it with old school electrical equipment as we speak. So there will be an evolution as the episodes push on through the year.
@bmax3934
5 жыл бұрын
Great video. Thanks so much
@brentwejrowski
4 жыл бұрын
Can you talk about safety equiptment to use for what applications? Or safety precautions for home/panel work?
@tomjeffries58
3 жыл бұрын
I always used a fluke. My oldest is 40 years old and still works. I just used it yesterday.
@michaelmassetti4068
2 жыл бұрын
Thank you very informative
@user-ru2gx3pl8t
5 жыл бұрын
Love the video 🤘🏼
@donphillips5957
3 жыл бұрын
That bit about measuring across the two mains for 240v, that's what I always thought (mostly self taught) until I actually did that and found 208v. Apparently standard in PGE- San Francisco Bay area. So it pays to check. Every time.
@fish_on_
5 жыл бұрын
Nice video. thanks.
@constructosu2805
3 жыл бұрын
Good video. I like how you talk.
@SeopaulRaghunanan-oy3fg
Жыл бұрын
I love your vido it makes me feel good thanks u very much God bless
@triplejautogroup957
2 жыл бұрын
good infomation!
@Waynefitzpatrick2032
2 жыл бұрын
Great detail without coming across as arrogant.
@christopherboyd7177
5 жыл бұрын
awesome channel buddy
@eddyster56
5 жыл бұрын
Thank you!!!
@clarkee510
4 жыл бұрын
Your a good teacher👍
@ToolShow
5 жыл бұрын
Great video Dustin! We're featuring it in this week's show! Love the studio. Keep it up!
@ElectricianU
5 жыл бұрын
Badass dude! I'll be sure to check it out for sure!!
@JaronPope
5 жыл бұрын
this video was awesome!
@ElectricianU
5 жыл бұрын
Thanks!
@keithgrimsleeper978
3 жыл бұрын
Thank you for your videos they're the shit love em very intriguing.
@theelectricianguy
7 ай бұрын
I have this meter and love it only thing is it’s only rated to 1000 ohm resistance anything over it won’t read just shows OL so if you have a motor with a fine short to ground it will more then likely want read it(been there before) overall awesome meter.
@vinhgolf
4 жыл бұрын
I love your video ! May I ask , which equipment do you recommend to use for circuit finder , for outlets ?
@Ready_Golf
3 жыл бұрын
First of all, love the channel you've created. I'm a 3rd Year resi. apprentice. My challenge is finding a product similar to this continuity beeper. Do you have any suggestions on what to look for or where I can find one. I thought maybe a pull cord alarm might help me, turns out the circuit board is much different even though the housing is similar. What to you use for ringing out a de- energized home when doing make up, or even confirming circuits during trim?
@randyowens2717
4 жыл бұрын
Nice video!
@ktw7hu
2 жыл бұрын
Can you do more videos on trouble shooting? Bring us into a problem and explain as you go what you're thinking and how you plan to fix the issue. Could be fun and informative vids.
Пікірлер: 299