We now have 2 nailer from this line- in LOVE with them. What a time saver!
@gamewithprez
2 жыл бұрын
Got mine yesterday! I took out our original medicine cabinet and made an open shelving one, with trim. My first time making something like this! I love this nail gun.
@interman7715
5 жыл бұрын
RYOBI, PLEASE OH PLEASE MAKE A ONE + FRAMING NAILER !
@standunitedorfall6394
4 жыл бұрын
I said the same thing after using my finish nailer
@andrewadams8601
4 жыл бұрын
Yep, just got the finish nailer and I'm loving it so far, but I would really love to get a framing nailer. Milwaukee has one that looks pretty good, but I'd really like to stay within the Ryobi ecosystem if possible since I already have the batteries.
@snoww2009
5 жыл бұрын
A very nice overview of how to use the ryobi nailer. I found it to be easier to understand the manuals.
@standunitedorfall6394
4 жыл бұрын
I just got my new airstrike off the ups truck yesterday. I built 3 valances and a box shelf for my daughter. I love it. Ty for a good video. Although I haven't taken the battery off nor unhooked the air line from my nail guns to reload nails it staples. Every video says to. Liability reasons.
@matthewnunyabeezness6675
6 жыл бұрын
Awesome video! I really wanted a basic tutorial and this covered all the bases :)
@RYOBITOOLSUSA
6 жыл бұрын
Glad you found it helpful, Matthew!
@LazyCrazyGuy
4 жыл бұрын
Waiting for the Framing Nailer, when is it coming? It's definitely needed!
@nodoubt46able
Жыл бұрын
never
@rishimakhanlal8905
Жыл бұрын
@@nodoubt46ableWrong
@BasketballDrawBreak
2 жыл бұрын
Great video! Short, to the point and informative!!
@Quarkburger
5 жыл бұрын
Thanks a lot Ana White!
@ricdonato4328
4 жыл бұрын
This video does not need music; in fact 99.99% of KZitem video do not need music. While attempting to understand Ana the music is very distracting and extremely annoying. Many folks have hearing difficulties thus music playing as one is speaking makes understanding the spoken words difficult.
@jeremywheeler8417
4 жыл бұрын
I just got the 16 gauge nailer for 85 bucks used and this was quite informative in learning some of the basics about it. Not to mention Ana White is a total babe.
@ljose007
Жыл бұрын
Got mine today!
@chenchenku
4 жыл бұрын
The background music is very annoying, otherwise it's a great video.
@melodycipponeri4407
3 жыл бұрын
Thank you for this!
@ChengDIY
3 жыл бұрын
Nice tool . Keep it up
@tomaseklund2299
3 жыл бұрын
That loud foreground music really makes it hard what Ana says in the background.
@jkbl1757
4 жыл бұрын
When are you guys gonna make a 21 degree framing nail gun either cordless or air powered
@MrReidster
2 жыл бұрын
Great how-to video but I got the new p326 and if fired a few nails but now it won't fire them at all, back to homedepot...
@charisma-hornum-fries
2 жыл бұрын
It would be such an improvement if the magazines could be changed between the sizes.
@RYOBITOOLSUSA
2 жыл бұрын
Thanks for the feedback, Charisma!
@AlexTraxxas
4 жыл бұрын
No mention of the 23 gauge nailer nor are there instructions on the 15 gauge in the video.
@untidymaker
4 жыл бұрын
Do y'all not have a framing gun yet? I'm going crazy looking for it at THD. I guess you guys dont have one??? What?
@charlie-s_life
6 жыл бұрын
I think i would buy this next
@RYOBITOOLSUSA
6 жыл бұрын
It's definitely a must have in any RYOBI collection, Charlie!
@sleepingtiger4436
2 жыл бұрын
what kind of nails can be used in the tools? in other words, must a 15 gauge nail be used in the 15 gauge angled nailer? or can 18 gauge 1 inch brads also be used!?
@jan9th1977
4 жыл бұрын
I have one and I love it
@brokenarrowez
4 жыл бұрын
I'm in love.
@אביתר-ס9ז
4 жыл бұрын
i am having problem use the t50 brads.it always stuck on gun and not goes out well.allreaady tried diif brads from diff brand.can u tell why is it like that?
@Lauralaey5
2 жыл бұрын
How to charge the battery? I bought an RYOBI nail gun, and a pack of 2 batteries. The gun didn't came with a charger, and I don't see any place where I can attach a charger to charge the battery, please help. Tia
@RYOBITOOLSUSA
Жыл бұрын
Hmm....your battery should have come with a charger. Please reach out to us at 800-525-2579
@brianmyers9989
2 жыл бұрын
Anna!!!!!!
@TJSWOODWORKINGSHOP
6 жыл бұрын
I like them all ha ha ha for sure yes,I like Ryobi tools best price for me later :)
@christopherking2999
6 жыл бұрын
Thanks Anna, my airstrike will drive a nail and not drive it on the second trigger pull. I have to pull the trigger a third time for it to work. Anyone have any thoughts?
@RYOBITOOLSUSA
6 жыл бұрын
Hi, Christopher! Feel free to give RYOBI Customer Service Department a call at 800-525-2579 and they will see if they can assist!
@NNITRED
5 жыл бұрын
Usually it's just a matter of a few drops of oil on the plunger and and rails. Just do a KZitem search on "Ryobi nailer fix" or and at least four videos will pop up. The same applies to the P320. Hopefully by now Ryobi took care of you.
@sunseeker8457
4 жыл бұрын
Yes a nice video. But it doesn't cover other troubleshooting problems that most people have. The most problems I have seen on KZitem was when in the middle of a project the nailer stops working. One problem that Ryobi doesn't cover how to fix very easily is when it stops firing because it needs a quick clean and some WD40 etc. into the firing pin. So many people have this problem including me at one point. Now that I know, it's an easy fix, but I think Ryobi could do better has most people today look at KZitem to help them fix different problems.
@shericreates
4 жыл бұрын
I just got my 16 gauge nailer. I did one trellis just attaching 17 thin boards to a 2x2. Went to use it again and I couldn’t get it to work for nothing searched and searched. It was brand new! I’m used to my nailer with the air compressor and having to oil each time I use it. Couldn’t find anywhere on Ryobi if I needed to oil it. I did follow someone’s advice on KZitem. Then sometimes it would make a popping or thud sound and no nail would come out. I was ready to give up. Do I need to use a bigger battery? Couldn’t find any info on that as well. I’m just using the one from my drill and driver. Any help would be appreiciated
@RyanMTube
4 жыл бұрын
Please make the 15 gauge available in the uk!
@rudychavira5558
3 жыл бұрын
How does the Brad nailer work on hardwood?
@AngeliqueKaga
3 жыл бұрын
Why is it that Ruobi doesn't make a nail to use in the brad nailer I have to use a Porter Cable nail in my gun,
@neilchadwick2037
3 жыл бұрын
I have the 16 gauge , I have it on full power and full depth , however it still leaves the head proud on MDF , my battery is only a 2 ah , if I were to buy a 4 ah would it sink the nails deeper or is it just run time that is increased
@joshymcdaniel9233
2 жыл бұрын
Yes it will produce a little more power but u r doing something wrong u need to adjust depth with little dial I use 1.5ah and have zero issues in pine
@alejandrolozano8573
6 жыл бұрын
When will Ryobi make a compact brushless drill
@RYOBITOOLSUSA
6 жыл бұрын
We can let our Product Development team know of your interest, Alejandro!
@AbamAdy
6 жыл бұрын
cool
@zherlife
4 жыл бұрын
Would’ve been nice if you could have shown how to insert the nails-newbie here.
@fractionmeister
4 жыл бұрын
I'm also a newbie. It did show how to load the nails. You may need to watch the video again, sorry, I don't remember at what point (minutes and seconds) they showed it. It looks pretty easy to do. I think I'll pull my gun out tomorrow and practice with it, see how it goes and such. Good luck to you as well!! Happy day!! 😊
@epenaloza52
4 жыл бұрын
Don't believe her if the lights start blinking it means there's an internal problem...usually you'd have to bypass a safety feature and then its back to semi normal or you can sell it on ebay, offer up, let go, or craigslist
@jigglybiglets
2 жыл бұрын
love the info just wish she didn't talk to me like I'm an idiot.
@bobalbert2828
4 жыл бұрын
She sure is cute😍
@elkedavies1330
Жыл бұрын
I can’t hear Ana over the terrible music. Would you please reupload it without the music track?
@foxyfoxglove
3 жыл бұрын
Including some instructions with your products instead of making us go on an endless internet hunt would be nice.
@عليحامدالتميمي
6 жыл бұрын
In which country are you and can you send materials to Iraq with thanks?
@RYOBITOOLSUSA
6 жыл бұрын
This is the US page for RYOBI. We do not have retailers in your area at this time.
@karls6802
5 жыл бұрын
4 different type shooting different size nail & (staple) It does little good to say it..."Show It"...show the Nails and different size!! This video is what's wrong with Ryobi Tools USA site, instead of a model standing there try using someone who works with tools, that way we might have gotten the info we need most. Try again Ryobi - If you going sell us tools...make the effort to be more serious in you videos.
@Givememoredisney
5 жыл бұрын
Dude - please google who Ana White is. She isn't a model.
@justinaplaxton9900
5 жыл бұрын
Karl S to be fair I was thinking the same thing re nail size etc. I wanted to see the difference between the 4 so I could decide what to buy!
@firstlast7090
3 жыл бұрын
Can someone please mansplane what she said.
@rcsc824sc8
5 жыл бұрын
She doesn't sound authentic.l those fake awkward smiles 😂 🤖🤖. "Right". Other than that, good info.
@MrKen-wy5dk
6 жыл бұрын
Too bad this lady has to read a teleprompter. If she could learn her lines, she would be a great spokesperson for RYOBI.
Пікірлер: 69