I sure appreciate people like you that will take your precious time out (Yes, our time is so precious in this journey) to help people learn the right way to do things. So happy I found your video. Thank You so much for caring! God Bless You!
@realarccos
8 жыл бұрын
This was extremely helpful, thank you! It's nice to see someone with the correct technical knowledge and experience sharing information about the correct use of sealers. This technique is extremely helpful when you're using rolls of poly instead of bags, because it allows you to re-open the side closest to the roll without cutting.
@TropicalRedFlower
2 жыл бұрын
This is the video I needed! Thank you so much, I was tearing it up from the product side and getting a thin seal and pulling it while hot which gave me ugly melted edges. This saves a lot of time and the bag looks professional. 🤗
@petermuller6923
6 жыл бұрын
WOW, you SAVED me a lot of MONEY. THANK YOU! I was planning to buy one of these very expensive heat sealers with a cutter, because i will have to make hundeds of bags per month out of tube sheet for my online shop and seal them with the items inside too. I have been using scissors and hated it. Takes so much time and looks terrible... Now i tried your method on my 40 bucks 400 mm cheapo sealer and it works perfectly. The seams get absolutely perfect. It looks very professional and saves so much time in comparison to the damn cutter if i had one and even much more in comparison to the scissors. Cool :) You can also make two bags out of one in a few seconds. Seal the bag in the middle or where you want to separate it, tear away one side. Now you have one bag finished. The other one has a weak seem. You only have to seal the outer border of this and it will be perfect too. For fun i already made air pillows from cheap foil for packaging on my own with an electric blower and the heat sealer. That works well.
@kxydn6363
6 жыл бұрын
Excellent Video, very informative! Your method definitely will save me time and money the next time I use the Uline Impulse Sealer. Thank you!
@alteredLori
6 жыл бұрын
thank you i just got one and now you showed me how to use it properly! Thank you for your time and knowledge!
@ChrisFredriksson
7 жыл бұрын
Beautiful! Just bought a machine and searching around for ideas, this video gave me a great tip! =)
@TravisDoodles
7 жыл бұрын
you just saved me $200 for not getting a cutter, thank you!
@Sooz3112
6 жыл бұрын
I didn't know that! That's great advice, thank you. I had also been contemplating buying a cutter or not, but unless it's really thick shrink wrap - I've never seen any other soapers use the cutting functionality. Kind regards, Su x
@w6263
2 жыл бұрын
Thank you for this video. As shops seem to do this a lot. The item you purchase is in a flimsy sealed bag and opens so easy.
@ClaytonDarwin
3 жыл бұрын
Thanks. Just what I was looking for. Practical advice.
@Karieeeeeee
3 жыл бұрын
This is awesome! I have been thinking I had a defective sealer. I never thought of pulling from the other side. Thank u so much! It looks so beautiful now!!!
@imokia03
5 жыл бұрын
Thank you, you made it so much easier
@jonpfiester9132
6 жыл бұрын
Thanks for this video man! Very helpful
@plantaction567
5 жыл бұрын
Thank you so much for your tips!! 😃🙏🏼❤️
@jungsomewhat
2 жыл бұрын
The most concise information thank you ..
@samihameed
Ай бұрын
Great video! Thanks for sharing
@joshuae668
7 жыл бұрын
Great advice. Thanks
@marcieknight2003
6 жыл бұрын
Very nice. I just started for soap making and am having trouble keeping it clean because I also have to use a heating gun after
@NoMoneyG
6 жыл бұрын
Great Vid!! Thanks for the tip!!
@Sufficient4UsIsAllah
2 жыл бұрын
Great tips! Which heat sealer are using? Thank you.
@Yarrney
6 жыл бұрын
Very informative. Thank you
@lutwamaumar1786
7 жыл бұрын
Thanks ,it was really helpful
@radevent1
4 жыл бұрын
Thank you, helpful information.
@behumanbekind
2 жыл бұрын
Great video, thank you.
@chametralashae6518
5 жыл бұрын
Thanks for the tips!!!!!
@tedsamuels3203
2 жыл бұрын
I think 🤔 this video was very helpful. THANKS
@alexkastano96
Жыл бұрын
good tip for beginners ,just got this machine , using it to store family damn expensive cashmere sweaters for the 9month of the year :))
@360-gamer57
Ай бұрын
What was the setting you used for the bag to be opened easily by hand? Also thx for making this video to make the instructions clear
@SherazManzoorOfficial
4 жыл бұрын
very well explained...thanks
@michaelraimondi2534
6 жыл бұрын
Excellent video, thank you for sharing your thoughts and instructions.
@JettBreedlove
4 жыл бұрын
Hi! Awesome vidoe!!! Quick question: What is your heating setting temperature dial set to?
@kiaypp
6 жыл бұрын
Brilliant!! thanks
@Cali-Girl
4 жыл бұрын
How do you keep the teflon strip clean without damaging it?
@assafbinfuad4526
3 ай бұрын
Thanks very useful video 😊
@DonOfGoldOfficial
7 жыл бұрын
Been searching for the right way to seal like a lot. Thank Allah ur video pop up and it's totally helpful. Thanks man. God bless u
@Geogak
Жыл бұрын
SO happy I watched this, almost blew $300 on a sealer with a cutter.
@oasispromosteam3012
4 жыл бұрын
Very nice!
@EdvanioSilva
Жыл бұрын
Thanks so much!
@lorigoedken8149
2 жыл бұрын
Thank you so much! My bag tends to stick to the top. Am I doing something wrong?
@scaylabs
7 жыл бұрын
Hi, I was wondering what machine you're using in this video. Thx!
@graham-jefferson
3 жыл бұрын
Could you use this for clear or tinted marine vinyl? Would it get hot enough to seal two 0.75mm pieces together securely?
@DavidLopez-dr1eq
6 жыл бұрын
Can it be used to seal nylon bags for Tattoo grips
@theurbanghost
3 жыл бұрын
Perfect thank you!
@foodiebyme776
2 жыл бұрын
Thank you for sharing
@damkayaker
6 жыл бұрын
I have the same box cutter. Tell me if the fumes from this device would cause discomfort in a non-smoker.
@purrLily
4 жыл бұрын
hey is it fine to always maximize the temperature of the sealing machine? if the temperature adjustment goes from 0 to 8, is it okay for the machine to be set on 8 all the time? thank you :))
@the12makeit
2 жыл бұрын
Do you have to buy the special bags for this machine or can I buy any plastic bags like bread bags or sandwich bags?
@hongkongcar685
4 жыл бұрын
Sir we use for water?
@fawnwolfe7355
5 жыл бұрын
Can you use it to put a steak down the middle of a page protector making a page protectors with two pouches?
@tomallen100
7 жыл бұрын
awesome thanks!
@bspeakman5102
6 жыл бұрын
Thx good tips to know.:)
@zhoulu1511
2 жыл бұрын
what heat setting were you at?
@kkatzvegankitchen
3 жыл бұрын
What is the knob setting at ...what # ...lol ...thank you for sharing
@Degod413
2 ай бұрын
Thanks can you reuse the excess piece?
@journeystorm8585
5 жыл бұрын
I do have a question that I am not understanding.. My heat know is 1 - 8... how do I know what heat setting? I am using thin "Shrink Wrap Poly Bags" - Thank You so much.
@christinenchua7374
4 жыл бұрын
Can thermal sealer be used in bubblewrap?
@jennalen7922
2 жыл бұрын
Hi, thanks for the video! I repeated your video, now I got mine from Amazon. But there's an issue, please help me. I tried to tear off the extra shrink bag, but it never worked. So I heated 2 or 3 times, but it wasn't tear off. Sometimes it hardly could be tear off or just ripped. Is this the defect of my machine? Do you think I need to refund this machine?
@rashiksingh8880
5 жыл бұрын
Very nice
@remnantsrita18
2 жыл бұрын
Hi does your machine make a noise I just bought one and the sound is strange and the smell?
@Maria-ur98
3 жыл бұрын
Hi! What’s the brand and model of the impulse sealer you are using in the video? Thanks!
@phillhuddleston9445
3 жыл бұрын
Great explanation, this is a simple device but I just watched a video of someone showing the wrong way to do it with a weak seal, now how will you open your product since you just sealed your knife in the bag :)
@lynxian-6097
2 жыл бұрын
buy a new knife 😂
@adamk1520
2 жыл бұрын
Are you using a ULINE sealer? I purchased a different sealer off of Amazon without cutter, and the bag would not cut away once sealed. I'm now looking at the ULINE brand.
@ajay4i
3 жыл бұрын
What is the sealing thickness of your machine. As here we get 1mm, 2mm, and 3mm thick sealing machines.
@sportsroses
7 жыл бұрын
Thanks. I won't pay extra to buy a sealer with a cutter now.
@bmed907
2 жыл бұрын
Where do you get the plastic bags from?
@trext888
2 жыл бұрын
Hi, can i use this to seal polymailer?
@faridahmed9734
4 жыл бұрын
How much price this machine ?
@vinodsinghparmar3272
7 жыл бұрын
Good
@jay45730
Жыл бұрын
I just bought one used it today, wrapped 9 lil boxes and it stopped working. Light turns on but it doesn't heat
@erikadacanay2766
6 жыл бұрын
how much is that
@sophialewis9986
4 жыл бұрын
Anyone here know how I can seal multi products on a plastic strip....like how old time lollipops used to come in a strip? Seemed to me they were enclosed on a long piece of plastic and then just sealed between each one. In other words, I'd like say 5 sweeties on on strip, but separated by a seal for each (you'd have to cut each one off). Can this machine do this?
@achillesglacia7700
Жыл бұрын
How to turn it on
@sheewinorate5553
2 жыл бұрын
San nabibili ng blade
@AydenSchofield
4 жыл бұрын
Did you call scissors fancy tools in the description?
@NikitaLab
8 жыл бұрын
doing the opposite where the excess contains the thicker seal makes shrink wrapped products look a lot better.
@petermuller6923
6 жыл бұрын
And then, you or your customer can open these without tools. That's really nice :)
@internationalpug1318
6 жыл бұрын
Get a roll of paper, then use as you go.... Less waste, an right size every time!
@ozarad6263
8 жыл бұрын
wooooooow
@user-ih9mc6tc1k
7 ай бұрын
Send me link
@K1KO247
6 жыл бұрын
Were can I order those bags
@richardsunday1612
6 жыл бұрын
aliexpress
@tinashahparast
8 ай бұрын
👺
@zahrakajee3224
3 жыл бұрын
Omg get to the POINT!!
@sanjuansteve
2 ай бұрын
Hi there! I'm in the process of packaging a new food product using a heat sealer, but I'm having trouble getting the sealed line to be wide enough for my needs. I'm currently using a basic model and the seal line is only 1-2 mm wide, a very thin line, and even on the lowest setting, it melts through the plastic too quickly, resulting in an untrustworthy seal. I've considered using a non-stick barrier like Teflon to help spread the heat more evenly, but I'm not sure where to find it or what thickness would be best. Do you have any suggestions or tips on how to achieve a wider seal and one that burns through less quickly with my heat sealer? Any advice would be greatly appreciated! Thanks in advance!
Пікірлер: 93