To make the area match much better with stain application, take a wire brush and lightly brush over the area in the same direction as the grain once product is 95% dry, it will help sell the look as long as the colour is matching with the natural surface. Becarfully not to over apply pressures as it will cause damage
@WhatTheFoxSherriFox
Жыл бұрын
Thank you… Good tip!
@TheOfficialFoxox
Жыл бұрын
great video, loved the music too, thank you!
@blindluck5734
Ай бұрын
I have done this before. I added some stain to a small amount of the plastic wood and put a smear of it on the word. Let it dry and if it needs more stain, add a little and do it again. When you get the correct amount of stain then go ahead and fill your hole and sand away all the other stuff. 3:27
@jasonlachance2364
Жыл бұрын
really good video. It's what I was looking for
@TheGodseye76
Жыл бұрын
Thanks a bunch!
@WhatTheFoxSherriFox
Жыл бұрын
Thank you!
@claudiathomas3560
Ай бұрын
Add some stain to the product before filling/applying so it matches as close as possible!? 🤷🏽♀️
@henloco7513
Жыл бұрын
Maybe could drill holes bigger and use dowel rod for plugs? And glue of course
@taxfree4603
6 ай бұрын
good video
@bornjust2003
Жыл бұрын
Thanks
@libbystevens3752
2 жыл бұрын
I always enjoy your videos! Only wish you posted more! 🤪I can’t ever get my stain to match the color of this filler for some reason. Not sure what I do wrong.
@libbystevens3752
2 жыл бұрын
I commented before I got to the end and you mentioned my exact problem! Lol hope someone does comment and helps us out! ☺️
@WhatTheFoxSherriFox
2 жыл бұрын
Thank you!💕 I always have the same problem with getting it to blend. May have to do some more experimenting with it 😜
@ifimust89
Жыл бұрын
What was the purpose of staining first if you sanded off the stain?
@WhatTheFoxSherriFox
Жыл бұрын
It is what the directions said to do, I guess to get down into the woodgrain before you fill it
@daledorsett9791
Жыл бұрын
Apples and Oranges. The plastic is resistant to staining, highest probability it will never stain to look differently. If it were paint it would cover it up bu the nature or stain is based on absorption of the stain.
@mijeightyfour
11 ай бұрын
Thanks for the video! Any idea what the best method is for filling screw holes that are 3” deep? At that point I’m not sure if this type of product would be best, or maybe a wooden dowel. For the dowel I’d have to drill the holes a bit bigger and I’d rather avoid that if possible.
@WhatTheFoxSherriFox
3 ай бұрын
Try matchsticks down in the hole at first and then put this over top
@mikeheroes5451
5 ай бұрын
When dealing with a 1/4 inch screw hole in a wall I’m thinking a combo of matchsticks, toothpicks, wood glue and wood filler in the deepest portion, jam it all in there as deep as possible, and then a wood dowel covered in both glue and wood filler shoved in last and hammered in to be flush with the wall, then one last scrapped layer of wood glue and filler. Let it dry, and bing bang boom my stripped wood hole is ready for me to fuck it up again with too much torque
@WhatTheFoxSherriFox
3 ай бұрын
🤣Awesome!💞
@DavidRitko
2 ай бұрын
I would just use wood glue and toothpicks
@timsparks2862
Жыл бұрын
Looks like a knothole
@johnc1280
Жыл бұрын
Stainability ?
@WhatTheFoxSherriFox
Жыл бұрын
It can be stained, but there is a little discoloration
@johnc1280
Жыл бұрын
@@WhatTheFoxSherriFox after staining it, you can still see? Where are the holes were filled?
@WhatTheFoxSherriFox
Жыл бұрын
@@johnc1280 yes, you can kind of get it to blend but I feel like yes you can still see it…
@GPSniper1
Жыл бұрын
no more new videos?
@WhatTheFoxSherriFox
3 ай бұрын
Unfortunately, with work, I just haven’t had the time. I would love to get back at it and maybe soon I will.🤷♀️
Пікірлер: 30