Hey Ryan, what if I wanted to change the focal length?
@SamuelOrf
22 күн бұрын
That will still be in your camera settings. You could set up another point on the right and use it as a driver for focal length if you wanted it all in one place.
@vegan_cat
Жыл бұрын
It would be great if you also included how to animate camera using a path. Since camera here is a bone and not an object it's ambiguous
@EdgarVenzor
9 ай бұрын
Hey i was wondering if you could help me. Im trying to get the rig to follow a path but im not having luck and same for the aim, im trying to get it to track an object but its not doing so through contraints and im stuck.
@_ScoutTF2_
Жыл бұрын
Hi. I want to ask if you would make a tutorial: how retopology works. And nice video 👍👍😁😁
@RyanKingArt
Жыл бұрын
Thanks for the tutorial idea. 👍
@_ScoutTF2_
Жыл бұрын
@@RyanKingArt 👍
@SuvamDas-y9l
Жыл бұрын
@@RyanKingArtyes make it with easy way so beginner can also understand waiting for the tutorial 😁
@oxhid3
7 ай бұрын
thanks, but I'd appreciated if you touched on Focal as well, which is linked and locked to the controllers as well
@koyu6183
10 ай бұрын
Hello Ryan. How do you change the F-Stop of the camera?
@travissmith7471
8 ай бұрын
As always you have done a quick and understandable video... Which was very helpful... Thanks for sharing...
@RyanKingArt
8 ай бұрын
Glad it was helpful!
@rendered_useless2093
6 ай бұрын
Hello how can you change the focal length? For me it is highlighted in purple and cannot be edited
@ahmetbaykara.mp3
Ай бұрын
Do you use the main bone to turn around an object? I mean like fake turn table
@hermano8160
Жыл бұрын
It's all nice and stuff but how can't one adjust the aperture in this rig? The f-stop is locked in pink. Shouldn't there also be a bone for aperture? I mean it's, besides focus, the second most important thing on a camera.
@RyanKingArt
Жыл бұрын
Ahh yes, that is because its added a driver to that value. To remove it, just right click on the value, and then click on: Delete Driver
@kabrownie
6 ай бұрын
how do i change the focal length of dolly rigged camera
@DandyAndy1472
Ай бұрын
I can't find the build in addon
@Eymen.design
Ай бұрын
same
@Eymen.design
Ай бұрын
go to> get extensions >allow internet access>search camera rig> install and bang u got it
@4115steve
Жыл бұрын
Can I use this with a follow on path constraint?
@snakemasterthorno
Жыл бұрын
Hi Ryan. Great tutorial as usual. Can you tell if there is a way to make an object parrented to the focus rig object to make the camera always following that object?
@philipmcdonnell7168
Жыл бұрын
Nice one, Ryan. It's been one of my 'things' that I've wanted to get to grips with but haven't realised there is a built-in rig tool. Thanks, for sharing.👍
@RyanKingArt
Жыл бұрын
thanks for watching!
@sadevanka8542
Жыл бұрын
hi ryan king!, I'm still new, I want to ask, I just opened a virtual clothing making business, I made it in a blender, I got a client asking for 2 pairs of gladiator clothes (linen/cloth, leather), male and female, what price should I give? he asked for a fixed cost.. I really need some advice, thanks a lot!
@RyanKingArt
Жыл бұрын
I'd say you should charge depending on how many hours of work you put into the project.
@sadevanka8542
Жыл бұрын
@@RyanKingArt let's say 48 hours, how much do you think it cost? thankyou for ur reply!
@shaikadam1828
Жыл бұрын
at 14:50 bhai u took it very seriously 😅😅😅
@RyanKingArt
Жыл бұрын
lol
@_delleps_
11 ай бұрын
Thanks for this tutorial! It seems I've encountered a bug because when I'm in pose mode and in the camera view, pressing G then SHIFT+Z doesn't work as it should. It only moves the camera (very slowly) along the X axis. And if I move too far or too fast, it starts going crazy and randomly jumping around. Everything works as it should when I'm outside of the camera view, though. I tried searching the web for other cases of this happening but couldn't find any.
@Grimstore
Жыл бұрын
Hello Ryan. If you notice in the center of your viewport, first few seconds, there is a bit of a pixelated effect. I had the same issue and I fixed it just by launching OBS as an administrator, in case you use OBS that is. Great tutorial, thank you very much !
@RyanKingArt
Жыл бұрын
Yes I use OBS to record my screen. Although I think the pixelated effect your seeing is just KZitem's video compression.
@raphaelsanabria7505
Жыл бұрын
I’ve got to say do the simplest thing counts so much thank u for this video it’s awesome and I can’t wait to see more
@RyanKingArt
Жыл бұрын
thanks for watching!
@soamsama
Жыл бұрын
long time no see, brother
@RyanKingArt
Жыл бұрын
oh, why?
@soamsama
Жыл бұрын
@@RyanKingArt used to watch your tutorials for hours again and again but i got no time to animate now... well my animation was improving
@RyanKingArt
Жыл бұрын
@@soamsama Ahh ok. 👍
@borjaborges4608
8 ай бұрын
Link to the addon??
@RyanKingArt
8 ай бұрын
its built into blender
@XirRalph
7 ай бұрын
Great video
@RyanKingArt
7 ай бұрын
thanks!
@MrMuri84
Жыл бұрын
Hi, Is it possible to set the cam focus object to follow a moving mesh?
@nektariosmusic
3 ай бұрын
Exactly what I needed! Thank you for posting this!
@RyanKingArt
3 ай бұрын
welcome!
@blenderstuffs
Жыл бұрын
Amazing 🤩🤩
@RyanKingArt
Жыл бұрын
Thanks!
@BrandonBloxBB
Жыл бұрын
So the dolly rigs are mainly good for animation then? I recently discovered the shift tilta hot key to move freely in the camera and I love that but knowing what the camera will focus on does seem nice too
@RyanKingArt
Жыл бұрын
yes I'd mainly just use the camera rig for animation. for just general posing of the camera, its pretty easy just to move it around, or to use the fly/walk navigation.
@moviesgamer6574
Жыл бұрын
great another tutorial ryan can you plz upload a video about how you visualize all this stuff or plan before getting into modeling
@RyanKingArt
Жыл бұрын
thanks for the idea
@肉棒
5 ай бұрын
This video heled me a lot. Thank you very much!
@RyanKingArt
5 ай бұрын
Glad it helped!
@elvismokua
Жыл бұрын
Thanks 🙏 much appreciated thanks for this
@RyanKingArt
Жыл бұрын
thanks for watching!
@dogzer
Жыл бұрын
Keep doing what you are doing! Thank you!
@RyanKingArt
Жыл бұрын
Thanks, will do!
@heramaaroricon4738
Жыл бұрын
This will be a fine addition to my workflow, thank you Ryan! :D Can't wait to use it in the end for my Stormwind Cathedral scene I am currently making.
Пікірлер: 76