Straight and Flush: How to add Threaded Heat-Set Brass Inserts to your 3D Printed Parts without expensive tools - just a Soldering Iron and a Soldering Tip you can reshape at home!
Brass Inserts for 3D Prints - Knurled
geni.us/CkpmHm2 (on Amazon*)
TIPs for Brass Inserts, M900 soldering iron standard:
geni.us/GdoHBA (on Amazon*)
Soldering Iron:
110V 80W, 180ºC to 480ºC - US Plug:
geni.us/vwmEYZ (on Amazon*)
240V 80W, 180ºC to 480ºC - EU Plug:
geni.us/relPlL (on Amazon*)
Heat-Set Guiding Press Tool - if you really need vertical alignment:
geni.us/gBTbAy (on Amazon*)
* These are all Affiliate Links
As an Amazon Associate I earn from qualifying purchases.
Dr. Igor from My Tech Fun did the test!
Does using the bolt head make the insert stronger? Watch:
• Even stronger Heat-Set...
Chapters:
0:00 Brass Inserts got cheap
0:39 Inserts for Injection Molding vs 3D Printing
0:57 Assortment Kits vs Bags of 100
1:21 Soldering Iron
1:37 Special Tips
2:00 Make your own Tip
3:01 Flat and Straight
3:19 Wrong Way
3:38 Right Way
4:27 Secret Tool: Bolt
5:35 Arduino Kits
_______________________________________________
Written, Performed and Produced by Everson Siqueira
Негізгі бет Ғылым және технология How to use Brass Inserts on 3D Prints using JUST a Soldering Iron
Пікірлер: 155