Thank you for making it short, easy to follow and straight to the point
@2msiachannel
5 жыл бұрын
Thanks for feedback
@aejeongjones5404
4 жыл бұрын
Thank you for this!!! It’s taken me nearly half an hour trying to work out how to work this piece of equipment!
@2msiachannel
4 жыл бұрын
thanks for the feedback
@afrulenko
4 жыл бұрын
Same
@jamiehinch9239
4 жыл бұрын
Same, thank you👍
@RvvX
3 жыл бұрын
Same. Lol thank you
@Troyboy_64
4 жыл бұрын
Thank you so much. I was losing my mind not knowing how to use it :-) cheers
@2msiachannel
4 жыл бұрын
really? thanks for feedback
@Troyboy_64
4 жыл бұрын
@@2msiachannel Yes, honestly:-) I convinced myself it was faulty before coming across your video. So, glad I did look your video up very helpful
@2msiachannel
4 жыл бұрын
@@Troyboy_64 thanks for your support
@user-mz9jm2ll6e
3 жыл бұрын
Thank you!!!this helped me so much!!!!I thought...it can't be that complicated !!but then I couldn't find the way!!!😅😅😅 Your video helped me out!🙏🙏
@2msiachannel
3 жыл бұрын
thanks for watching
@youtubeaddict5663
4 жыл бұрын
Thank you so much. I really needed to see 01:52 coz I was about to cut into the plastic haha
@MrResearcher122
3 жыл бұрын
I thought you were going to waffle about silicone. But you got there,in the end and sharp. Thanks a lot for wonderful straightforward help👍💖
@2msiachannel
3 жыл бұрын
thanks for watching
@sunnie231138
4 жыл бұрын
Life saver 🙌 ! Thank you for your clear and concise instructions 👍
@2msiachannel
4 жыл бұрын
thanks for watching
@1emmajones
4 жыл бұрын
Thankyou i just could not remember how it worked. Was sat here for hours.
@2msiachannel
4 жыл бұрын
really? thanks for support
@alexadnan1032
4 жыл бұрын
That push and pull saved me from breaking it into 1000 pieces
@NH-ib1lv
4 жыл бұрын
Me too 🤣🤣
@davidtyson612
3 жыл бұрын
same🤪
@nanaaljebory1593
3 жыл бұрын
So ami
@mkethk.3577
3 жыл бұрын
😂same
@connyspecht1474
2 жыл бұрын
Hahahahahahahah
@Drifting47
Жыл бұрын
I was so confused on how to pull it back, didnt know all you needed to do was push it down lol. thank you sir!
@2msiachannel
Жыл бұрын
thanks for watching, Once you know to put in you sure know how to pull out. common sense.
@youtubecommentator6757
2 жыл бұрын
Your accent is incredible. Love from the UK. Helped me alot!
@2msiachannel
2 жыл бұрын
thanks for watching
@iyshiysh4969
2 жыл бұрын
Thank you. You helped me so much my sister was struggling for years
@2msiachannel
2 жыл бұрын
thanks for watching
@mahroo001
2 жыл бұрын
Thank you soo muchhh.. U make it very easy.. M a house wife don't know anything abt it... It helped me a lot. Stay blessed
@2msiachannel
2 жыл бұрын
thanks for watching
@otbfitness1313
Жыл бұрын
I love this, fellow DIY people helping each other! Happy tinkering 😊
@2msiachannel
Жыл бұрын
thanks for watching
@iggyvci0us
2 жыл бұрын
THANK YOUUUU I've been struggling with this for 40 min and I couldnt find a video that used the same exact gun I have. THANK YOU SO MUCH
@2msiachannel
2 жыл бұрын
thanks for watching
@day-knowmchoraji7615
4 жыл бұрын
Thank you very much,was wondering how to fix it in this Corona error and yet I have a job .... So happy
@2msiachannel
4 жыл бұрын
Thanks for your feedback
@day-knowmchoraji7615
4 жыл бұрын
I managed to fix and work, thanks very much,I made money today from online class,again I say thank uou
@trzeciaracja4771
10 ай бұрын
Wreszcie ktoś pokazał to dokładnie. Dziękuję! Pozdrawiam z Polski.
@2msiachannel
9 ай бұрын
yes
@bergen0802
4 жыл бұрын
This is helpful and simple to understand. Most of other video about caulking gun were too much talking. This is straight forward!
@2msiachannel
4 жыл бұрын
Thanks for watching
@JGC23
Жыл бұрын
Easy and straight forward demonstration. Thank you.
@2msiachannel
Жыл бұрын
thanks for watching
@nandyabhijit
2 жыл бұрын
Thank you so much for the video! The steel handle(the one which applies the pressure) would not retract for me initially. Then I realized that in addition to pressing the steel lever at the back I was also pressing the red trigger. Now I set it up correctly. I am going to use it to seal a gap between washroom tiles and the wooden door frame. It needs to go deep in between so I was thinking of cutting the nose very close to the tip. But after seeing the video I think it will block the silicon flow leading to major back pressure. I ll cut it a bit further from the tip and try. Thanks again and may the seal hold :D
@2msiachannel
2 жыл бұрын
thanks for watching
@breezly101
2 жыл бұрын
Thanks for a brilliant straight forward demo👍🏾👍🏾👍🏾 this saved us a lot of time! We have the same caulking gun and silicone so this video was so helpful. Thanks so much for sharing this😀
@2msiachannel
2 жыл бұрын
thanks for watching
@mrmusi4512
3 жыл бұрын
Thank you. After buying silicone sealant and caulking gun, I had no clue how to set it up, but now I know 🙂
@2msiachannel
3 жыл бұрын
thanks for watching
@Hami04
4 жыл бұрын
This is really really helpful.. Thank you so so so much
@2msiachannel
4 жыл бұрын
Thanks for feedback
@afifaahmed76
2 жыл бұрын
Thank you for this video. Saved a lot of time.
@2msiachannel
2 жыл бұрын
thanks for watching
@redstoneuk1
4 жыл бұрын
Thank you. This video really helped, its straight forward and easy to follow.
@2msiachannel
4 жыл бұрын
Thanks for support
@sndtae
3 жыл бұрын
It may seem like a no brainer to some people but this video has helped me! So thank you!
@2msiachannel
3 жыл бұрын
thanks for watching
@emosionalALI
3 жыл бұрын
I had to watch this tutorial first before buying it. Thanx very much!
@2msiachannel
3 жыл бұрын
thanks for watching
@GopalSharma-rn4kr
3 жыл бұрын
Me to got 1 hrs for setting..but this video made my day thank u so much..
@2msiachannel
3 жыл бұрын
thanks for watching
@junaidnizami7076
2 жыл бұрын
Thank you this was very helpful
@2msiachannel
2 жыл бұрын
thanks for watching
@AlejandroMartinez-cl4kk
Жыл бұрын
First time using this so very useful, thank you.
@2msiachannel
Жыл бұрын
thanks for watching
@rishisubu
3 жыл бұрын
Simple ,easy demonstration, thanks!
@2msiachannel
3 жыл бұрын
thanks for watching
@brifgtstar1276
9 ай бұрын
thank u for teaching us, i just bought today n no instruction how to use, thank u for the guide
@2msiachannel
9 ай бұрын
thanks for watching
@maruthkamath9304
5 жыл бұрын
Very useful. clearly explains the use of the gun.
@2msiachannel
5 жыл бұрын
Thanks for the feedback
@user-di3sw6zn6h
3 жыл бұрын
شكرا لك حقا شرحك واضح ومفصل وساعدني كثيرا🌸🌸
@2msiachannel
3 жыл бұрын
thanks for watching
@chaccopo
2 жыл бұрын
This was very useful!! Finally know how to use the caulking gun after seeing your video
@2msiachannel
2 жыл бұрын
thanks for watching
@rakhmatsusanto1050
3 жыл бұрын
Good and simple explanation.thanks
@2msiachannel
3 жыл бұрын
You are welcome
@sweetmary3233
2 жыл бұрын
Thank you! Haha I had no clue where to star. Saved my project!
@2msiachannel
2 жыл бұрын
thanks for watching
@theodore9668
3 жыл бұрын
Thank you so much. I was loosing my shit trying to figure it out
@2msiachannel
3 жыл бұрын
thanks for watching
@virvikramjeet1526
Жыл бұрын
Thanks .. this video is usefull to me . Thanks a lot
@2msiachannel
Жыл бұрын
thanks for watching
@kaifahalas2
4 жыл бұрын
Now i know how to use this. Thank You !
@2msiachannel
4 жыл бұрын
Thanks for feedback
@doves1100
3 жыл бұрын
I have been, freaking out over this tool!!! Wow, so easy. I was going to return it.
@2msiachannel
3 жыл бұрын
thanks for watching
@lexiwilliams9422
2 жыл бұрын
Thank you sir I have just broke one by forcing it to much ,so hopefully by using you instructions I would break another 😆
@2msiachannel
2 жыл бұрын
thanks for watching, this just simple step. easy as 1,2,3
@SteveM-ly7oy
4 жыл бұрын
thank you! I bought one today and was trying to work out how to use it.
@2msiachannel
4 жыл бұрын
Thanks for watching
@northonly438
4 жыл бұрын
Thank you very much, I did need to use that today and I didn't know how 👏
@2msiachannel
4 жыл бұрын
Thanks for watching
@gingerteddy618
Жыл бұрын
Thank you for your video. It really helps.
@2msiachannel
Жыл бұрын
thanks for watching
@5heeshi
4 жыл бұрын
Thank you for the informative video. I got stuck at the getting the gun to work, you helped.
@2msiachannel
4 жыл бұрын
u're welcome. Thanks for support
@ltreyes16
2 жыл бұрын
Such a big help for me , thank you ...
@2msiachannel
2 жыл бұрын
thanks for watching
@jackheartfulloflove9356
4 жыл бұрын
Just to say THANK YOU you save me to look for how to do this
@2msiachannel
4 жыл бұрын
Thanks for watching
@desmondquailey6476
4 жыл бұрын
Thank you saved me a lot of time and hassle
@2msiachannel
4 жыл бұрын
welcome, thanks for the feedback
@shreesanu9952
3 жыл бұрын
Thanks a lot bro, I trying so many way to fix the gun which so easy after see you video ...really very helpful ppl like me 👌👌👌
@2msiachannel
3 жыл бұрын
thanks for watching
@TombInTheWater
2 жыл бұрын
Very Helpful Thankyou.
@2msiachannel
2 жыл бұрын
thanks for watching
@saimashakoor3173
4 жыл бұрын
Thanks a lot. It helped me a lot.
@2msiachannel
4 жыл бұрын
Thanks for the feedback
@psbsoham
4 жыл бұрын
Great video, really helpful, thank you.
@2msiachannel
4 жыл бұрын
Thanks for watching
@emmakelly8668
2 жыл бұрын
Omg thank you I could not figure this out for the life of me 😊 😘 xxxx
@2msiachannel
2 жыл бұрын
thanks for watching
@urielmartinez6279
2 жыл бұрын
Amazing video thanks you helped us so much!
@2msiachannel
2 жыл бұрын
thanks for watching
@user-bb2kd2vm3p
4 ай бұрын
Thank you❤🎉
@rym.i
4 жыл бұрын
Thank you very much
@2msiachannel
4 жыл бұрын
Thanks for watching
@lochamoezung4967
4 жыл бұрын
Thanks for the video . I made an aquarium tank just today and it’s very helpful on how to use Caulking gun .
@2msiachannel
4 жыл бұрын
Thanks for watching
@taufiqraffael5538
2 жыл бұрын
Saya cuba buat sampai jari tersepit Terima kasih sebab upload video
@2msiachannel
2 жыл бұрын
terima kasih menonton
@t85887
2 жыл бұрын
Very helpful. Thanks!
@2msiachannel
2 жыл бұрын
thanks for watching
@zaheercarrim1035
3 жыл бұрын
Thank you Sir!! Needed this
@2msiachannel
3 жыл бұрын
thanks for watching
@fearthemosthighandlive7
Жыл бұрын
Thank you for the directions : )
@2msiachannel
Жыл бұрын
thanks for watching
@stopgunz
2 жыл бұрын
Thanks it was very useful
@2msiachannel
2 жыл бұрын
thanks for watching
@RishirajSahaRoy
2 жыл бұрын
Very useful, thanks!
@2msiachannel
2 жыл бұрын
thanks for watching
@GopalSharma-rn4kr
3 жыл бұрын
Thank u so much this video made by day..
@2msiachannel
3 жыл бұрын
thanks for watching
@iyoutusing
4 жыл бұрын
Thank you. It was very useful and easy to follow.
@2msiachannel
4 жыл бұрын
Glad it was helpful! thanks for watching
@emiliqpetkova7434
10 ай бұрын
Благодаря ❤
@linahchiwambo9836
3 жыл бұрын
Usefull for me, thank you very much. I was clueless on how to use it.
@2msiachannel
3 жыл бұрын
thanks for watching
@sabrinastyblova
Жыл бұрын
thank you for this video, it was really healpful. I have a question though. How do you close the tube again? I used it for mamut glue and i dont know how to keep it from drying out. Thanks a lot! :)
@2msiachannel
Жыл бұрын
you may use masking tape to tape the hole. Once it dry inside still can use in future
@johnkane4527
3 жыл бұрын
Thank you.very helpful
@2msiachannel
3 жыл бұрын
thanks for watching
@azahariazahari7481
3 жыл бұрын
Thanx bro. Very useful
@2msiachannel
3 жыл бұрын
thanks for watching
@kamilkhadzari9332
3 жыл бұрын
very good instruction!
@2msiachannel
3 жыл бұрын
thanks for watching
@iva4438
2 жыл бұрын
You’re wonderful! Thanks
@2msiachannel
2 жыл бұрын
thanks for watching
@user-vg4rf7nd1g
11 ай бұрын
Thank you bro, god bless you,
@2msiachannel
11 ай бұрын
thanks for watching
@reggieanasco8133
3 жыл бұрын
nice presentation Sir 👌
@2msiachannel
3 жыл бұрын
thanks for watching
@googooboyy
Жыл бұрын
Keeping it simple, sir (KISS). Awesome~
@2msiachannel
Жыл бұрын
thanks for watching
@monamona6875
4 жыл бұрын
Thank you very much, this video was really helpful for me and my daughter
@2msiachannel
4 жыл бұрын
thanks for watching
@neiljohnson7963
3 жыл бұрын
This was useful - thanks
@2msiachannel
3 жыл бұрын
thanks for watching
@MelissaEasyNails
Жыл бұрын
THANK U !!!!
@2msiachannel
Жыл бұрын
thanks for watching
@adreezafreenhamizan7946
4 жыл бұрын
Yahh..proud to be malaysian 😋😋
@2msiachannel
4 жыл бұрын
terima kasih
@luyoranblogs6864
Жыл бұрын
Thanks for the instruction sir
@2msiachannel
Жыл бұрын
thanks for watching
@TORCIDA1207
2 жыл бұрын
Thank you sir God bless you
@2msiachannel
2 жыл бұрын
thanks for watching
@amirothmiredith579
3 жыл бұрын
Thank you 😊
@2msiachannel
3 жыл бұрын
thanks for watching
@helenedahlberg6729
2 жыл бұрын
Thank you! This was what I searching for 👍🏼
@2msiachannel
2 жыл бұрын
thanks for watching
@deborahi6969
2 жыл бұрын
Such a helpful video. Thank you so much!
@2msiachannel
2 жыл бұрын
thanks for watching
@abzinho10karim25
Жыл бұрын
Good boy. Now i can say I'm a DIY guy. 😂😂😂😂
@2msiachannel
Жыл бұрын
thanks for watching
@IsaacBhatti1
2 жыл бұрын
Thank you so much 😊
@rojibfebrianhariadi2503
4 жыл бұрын
Thank you for this video, I just bought this same silicon gun and have no ideo how to install it, never use this kind of tool before. 👍
@2msiachannel
4 жыл бұрын
thanks for the feedback
@lpsarahmitkara1323
4 жыл бұрын
Thanks for helping me
@betojojoi6962
4 жыл бұрын
Simple video but it helps me a lot
@2msiachannel
4 жыл бұрын
Thanks for the feedback
@SantaX891
3 жыл бұрын
Thank you! I almost broke this shit trying to get it open.
@2msiachannel
3 жыл бұрын
i see, thanks for watching
@Fnajafi004
5 жыл бұрын
THANK YOU SOOO MUCH. YOU GOT A NEW SUBSCRIBER THIS IS REALLY USEFUL💕💕💕💕💕
@fizi_bersama
3 жыл бұрын
Thanks for the video
@2msiachannel
3 жыл бұрын
thanks for watching
@robertulph
2 жыл бұрын
Thanks for this 👍
@2msiachannel
2 жыл бұрын
thanks for watching
@0007lalala
3 жыл бұрын
THANK YOU!!! life saver haha
@2msiachannel
3 жыл бұрын
thanks for watching
@sapphireclark5191
25 күн бұрын
Helpful thank you
@2msiachannel
24 күн бұрын
thanks for watching
@tauaui5180
3 жыл бұрын
Thank u :D !!
@2msiachannel
3 жыл бұрын
thanks for watching
@karheng
4 жыл бұрын
I bought the same thing from Mr. DIY today (19 Aug 2020). RM9.04 rounded paid RM9.05.
Пікірлер: 457