Thanks - that answers a lot of questions! - great video
@CrazyWillTechShow
4 ай бұрын
My pleasure!
@edwinbarreto58
4 жыл бұрын
As a novice to Chitubox, I found your video very informative, easy to understand, and practical to use. Thank you. Keep making these videos
@CrazyWillTechShow
4 жыл бұрын
Thank means a lot.
@treyharlan8289
3 жыл бұрын
a trick: you can watch movies on flixzone. I've been using it for watching loads of movies recently.
@milojames510
3 жыл бұрын
@Trey Harlan yup, have been watching on flixzone for since december myself :)
@nashkairo4863
3 жыл бұрын
@Trey Harlan Definitely, I have been using Flixzone for since november myself :D
@carmelarodriguez5110
4 жыл бұрын
Dude OMG! I just got my Elegoo Mars in the Mail yesterday, printed the rook an have been searching online for easy, user friendly Chitubox use tutorials, and WOW, JUST WOW! Dude, I am soooooo happy I found you video today! You have explained things BEYOND AMAZINGLY EASY!
@CrazyWillTechShow
4 жыл бұрын
You made my day! I'm always worry about if I'm explaining it well or making it easier to understand. That feed back really help me to see if I'm on the right track. Thank you! So how you liking it? It an amazing printer I done over 100 prints. I want to get the bigger one now lol.
@carmelarodriguez5110
4 жыл бұрын
Crazy Will Tech Show So far I am liking the 3-D printer very much. Although, I am just starting to make prints on it. Thanks to your video I am going to have so much fun! I specifically loved this video because it is made for someone like me who has no previous knowledge on 3-D printing and just wants to start printing without any hassle. I want to make prints so I can paint them, make them look pretty, and add them to my figurine collection.
@CrazyWillTechShow
4 жыл бұрын
Your going to love it then just got done with the wolverine that I printed in several pieces. You can check it out on my Instagram.
@Jerichoom
Жыл бұрын
You angle the prints to reduce suction (gigidy) as that big base area et al will struggle when the bed lifts. You also make holes in the base usually to prevent making a big ol' plunger , so the resin can reflow under the piece :)
@CrazyWillTechShow
Жыл бұрын
Yup 👍🏻
@notadogsname
2 жыл бұрын
Well done. Hits the highlights. No wasted time.
@CrazyWillTechShow
2 жыл бұрын
Thanks really appreciate it.
@JeffGarrisonPlus
4 жыл бұрын
I've been 3D printing for a few years now and I just got my first resin printer. I would love to see what you do for painting as that's something I want to get better at. And it looks like you've done a really good job.
@CrazyWillTechShow
4 жыл бұрын
Thank man really appreciate that I did a video kzitem.info/news/bejne/yKF3t4t4b2N_goI . So you have an FDM 3-D printer? How does it compared to the Elegoo Mars? You know resolution and strength. Think of getting ender 3.
@briankristianto2055
Жыл бұрын
Hi bro, may i ask what happen if the volume and weight of my model showing minus sign? there is some errors in my model or what?
@sespider
3 жыл бұрын
I'm trying to setup the lion model that came with my Elegoo Mars 2 (not the pro). I have it printing pretty large with the tail at the bottom. The problem is that my chitubox will not allow me to login, nor does it list and resin as yours does. How do we know how to set up the settings for each resin?
@CrazyWillTechShow
3 жыл бұрын
Man I spent over an hour on this, I don't understand it myself. Some reason I haven't found they're not putting in the settings for resin on any other printers except for the Mars. Really annoyed! Here is a list of settings where are you to manually put them in www.elegoo.com/blogs/3d-printing/elegoo-printers-resin-setting-sheet if you could add regular ELEGOO Mars too your printers and see if your seeing what I'm seeing. All the settings will be there for the Mars.
@brianstewart3594
4 жыл бұрын
hi my name is brian stewart in ireland how do you make sure your design come from sketchup 3D warehouse to print i am found it hard to slice
@CrazyWillTechShow
4 жыл бұрын
I’ve never downloaded from them but The biggest thing is to make them one object. If there’s a combined tool or boolean tool that what you want to use to make the object one piece. I think that what you’re talking about?
@christophermactaggart243
3 жыл бұрын
Newbie day 2 of having Mars 2 pro …… did you put the different resins in manually in settings ?
@CrazyWillTechShow
3 жыл бұрын
Honestly I don’t know what’s going on you’re the second person that asked me that. Looks like there not putting the filament profiles in Chitubox anymore which is crazy to me. Here’s a link to the settings www.elegoo.com/blogs/3d-printer-user-guide/elegoo-printers-resin-setting-sheet
@beefknuckles
2 жыл бұрын
This is exactly the type of video I needed. Thanks brotha
@CrazyWillTechShow
2 жыл бұрын
Thanks man! Enjoy printing!
@harleysimmons4393
3 жыл бұрын
Very rad video and your energy just resonates well with me!
@CrazyWillTechShow
3 жыл бұрын
I must say that probably the nicest comment I’ve gotten a long time. Thank you.
@tonisherrod598
3 жыл бұрын
THANK YOU!!!! I just bought this 3d printer without doing any research. My son and I have been looking at KZitem videos with no luck until tonight I came across your video!! I don't know if you have done a video on 3d printing a photo if you haven't could you please?
@CrazyWillTechShow
3 жыл бұрын
Absolutely that’s a great idea! Thank you I hope my videos helped. Once you get it down it’s a lot of fun.
@CrazyWillTechShow
3 жыл бұрын
Your video come out this Friday. Really appreciate the idea.
@imagineimageorg
2 ай бұрын
my question is can one hook up the mars so it can print directly from the windows computer instead of this usb stick thing which is so 90's. i mean really? a usb port that wont accept a usb cable? The elegoo neptune prrints perfectly via an ethernet cable so what gives?
@CrazyWillTechShow
Ай бұрын
That just the way they do it. Most PC will go into screen saver or sleep Mode which would disrupt the print. Honestly, it's pretty good set it and forget it you're not using two machines.
@kensmodelworks7218
2 жыл бұрын
is there any way i can send you some screen shots of my sittings so you can have a look at them
@fatdudegamer
Жыл бұрын
massive question on chitubox i have a flash forge foto 8.9 printer how do i setup chitubox so the plain in the slicer matches my build plate on the printer do i need to connect my printer to my pc for it to be reconize PLEASE HELP ??????
@CrazyWillTechShow
Жыл бұрын
Go onto the profile settings and select your printer.
@XxExtremeGod54xX
3 жыл бұрын
Hello, just wondering where I can find all those resin settings( 7:30 )? I'm trying to print in clear red but want to make sure to use the best settings.
@CrazyWillTechShow
3 жыл бұрын
You have to select your printer in settings and it will pre-load all those settings.
@kensmodelworks7218
2 жыл бұрын
Hi Will i did a print of a part of a model it took 2 1/2 hours to do--- went back to do it again and it said 13 hours what did i do wrong for it to take so long
@CrazyWillTechShow
2 жыл бұрын
Sounds like something with your slicing settings.
@michaeloakes3667
3 жыл бұрын
This video was great! Helped me out of the box to printing on my Mars P. Thanks mate!
@CrazyWillTechShow
3 жыл бұрын
That awesome! Your going to have lot of fun with it. Very addictive lol.
@SuperJeremy1982
4 жыл бұрын
I noticed that you mentioned researching which acrylics would stick to the resin, have you considered priming your models?
@CrazyWillTechShow
4 жыл бұрын
Thank you. I figured it out priming did work. kzitem.info/news/bejne/yKF3t4t4b2N_goI
@everfreeeeee
4 жыл бұрын
If i want to print the original size of dead poo, can i put it in few pieces and glue them up after i got all parts? Do u have video teach how to do so?
@CrazyWillTechShow
4 жыл бұрын
Funny u should ask kzitem.info/news/bejne/xm-My614h6B5ZJw
@nicoledantuonoporvidaloca8370
Жыл бұрын
Very helpful! Yes, please do a how to paint 3D Models video. :)
@CrazyWillTechShow
Жыл бұрын
Thanks! I did, How to Paint 3d prints, the basics kzitem.info/news/bejne/yKF3t4t4b2N_goI
@ch3ckm4te480
4 жыл бұрын
Awesome video I was so confused until I found this great job lots of info here. Thank you.
@CrazyWillTechShow
4 жыл бұрын
Thanks glad it helps. Thank you for letting me know. It really helps my Channel.
@deepaxson
3 жыл бұрын
I am in need of big help. My printer will not print. I have checked everything that was recommended. I have set up and slice several files and non of them will print. I have had the printer for a month and some what out of no where it no longer prints. Anything you can suggest would be of great help. Thank you
@mrmagic3331
2 жыл бұрын
@10:00 curious why not just use "save project"?
@CrazyWillTechShow
2 жыл бұрын
I explained it in the video. Because if you just save it you can’t choose the file format.
@richardwilson2621
4 жыл бұрын
Hey im real new to 3d printing my printer just came the other day . I have a anycubic photon s . I set it up and printed 3 prints they came out amazing. I went and downloaded a print and ran it through the anycubic slicer then saved the file then transfered it to the anycubic thumbdrive i inserted the thumbdrive into the printer and the 4 squares on the front of the printer was empty like the thumbdrive was empty . Then i ran the file through chitubox put it on the thumbdrive and the samething happened . I need help step by step on how to make a folder for the file and how to transfer the file from the computer to the thumbdrive .please any help is heaven sent thank you
@CrazyWillTechShow
4 жыл бұрын
I never ran into this problem and I don’t have and anycubic photon. I hear it’s good printer though. I found this for you to try www.reddit.com/r/AnycubicPhoton/comments/ed2lda/photon_not_reading_usb_files/
@richardwilson2621
4 жыл бұрын
@@CrazyWillTechShow thanks for your help
@RynoDBones
3 жыл бұрын
Just got my first printer this week. It’s absolute HELL getting this thing to work. Everything keeps sticking to the FEP. Ugh. Watched so many videos, changed so many settings, and finally got the Validation tool to print perfectly. It was actually the first thing to print correctly. Haha.
@CrazyWillTechShow
3 жыл бұрын
I clean the FEP with Windex before every print. Helps it from not sticking. You may want to ruffle the surface of the build plate aka plunger for better adhesion.
@RynoDBones
3 жыл бұрын
@@CrazyWillTechShow After DAYS... Finally joined a group on Facebook and lots of people having the same issues with this same printer. Honestly the simplest solution: level using 2 sheet of paper instead of one like the instructions said. Seriously. That was all. Two. Pieces.
@CrazyWillTechShow
3 жыл бұрын
As you go on with your journey you’ll see it’ll be more and more stuff like that. Lol.
@rototumassi
3 жыл бұрын
Awesome! Thanks for sharing. Learned something new
@CrazyWillTechShow
3 жыл бұрын
Awesome glad I could help.
@rkpad5
3 жыл бұрын
Thanks for the helpful information, just got an elegoo mars pro 2 and this helps a bit with the software. Curious to o where you found the file for the Alice figure? You did a hell of a job on her.
@CrazyWillTechShow
3 жыл бұрын
Thanks my first big one, Here where to get the file www.thingiverse.com/thing:3161348 she was a lot of fun to work on, it Took me several weeks.
@lyxzy-3036
4 жыл бұрын
Can you print on the blue border if it isn't red???
@CrazyWillTechShow
4 жыл бұрын
You can but wouldn’t recommend it. Had some cut off happen even though it wasn’t red.
@richardemason7890
3 жыл бұрын
@@CrazyWillTechShow hi. Great video! So what format must I save my chitubox projects as once it's done please? I only have the options of stl (no-no!), .obj and .chitubox. I see yours have a different one?
@deepaxson
3 жыл бұрын
I might be writing this twice so I will make this 1 short. Out of no where my printer has stopped printing. I have set up and sliced several files but non are working. Hope you can help. Thanks
@CrazyWillTechShow
3 жыл бұрын
Nothing on the screen or is it going through the motions and not printing?
@deepaxson
3 жыл бұрын
@@CrazyWillTechShow the screen is fine it does everything it should. When the plate goes to the bottom of the vat......that's when nothing happens. It makes noise and just sits there.
@CrazyWillTechShow
3 жыл бұрын
I haven’t run into that problem. Does it move up? With the manual controls?
@deepaxson
3 жыл бұрын
@@CrazyWillTechShow yes I can use manual tools. I have tried 4 times today with nothing. I work with miniatures. It is usually 2 hour print. I left each print for 2 hours and nothing. I think I might have to return it.
@CrazyWillTechShow
3 жыл бұрын
Have you tried re-slicing the file and saving it on another jump drive?
@davidangelo8902
10 ай бұрын
Thank you for the information I'm yer regular newbee
@CrazyWillTechShow
10 ай бұрын
Glad to help
@fuqorock
3 жыл бұрын
Thanks
@stevebruner7473
3 жыл бұрын
I followed all this info and printer stills says file unknown. Elegoo Saturn. Someone please help before I throw this printer in the trash?!?!
@CrazyWillTechShow
3 жыл бұрын
The new elegoo different file formats and people have been having issues with the new version of chitubox. Use the Version that is on the SD card that came with the printer. That should fix your problem.
@johnny9toes
3 жыл бұрын
Damn right I want to see your painting tutorial.
@CrazyWillTechShow
3 жыл бұрын
Lol I got them kzitem.info/news/bejne/yKF3t4t4b2N_goI and now kzitem.info/news/bejne/kpxn2XqFf2ZyiZw
@SeniorRed1337
3 жыл бұрын
but WHY the 4 degree...that doesnt seem so..clever.. but i ahvent used SLa so far.
@carmelarodriguez5110
4 жыл бұрын
And yes, please make a painting video!
@CrazyWillTechShow
4 жыл бұрын
kzitem.info/news/bejne/yKF3t4t4b2N_goI
@CrazyWillTechShow
4 жыл бұрын
Here the painting video kzitem.info/news/bejne/yKF3t4t4b2N_goI Accessories that can help video kzitem.info/news/bejne/taGF1oqtr5yDq34 And how are you can speed up the printing process kzitem.info/news/bejne/q52Z0ZdujXNopHY make sure you read my pin on that video you have to increase the exposure which I didn’t show in the video.
@carmelarodriguez5110
4 жыл бұрын
Crazy Will Tech Show OMG JUST MARRY ME ALREADY! You are soooo wonderful!
@CrazyWillTechShow
4 жыл бұрын
Lmao sorry already married.
@anantsinha3690
3 жыл бұрын
CHITU- box not chitubox
@peterparkerakaspider-manth2977
4 жыл бұрын
Where do you get those WEIRDO glasses. Dorking looking lol 😂😁
@CrazyWillTechShow
4 жыл бұрын
Hey my mom bought me those... 😁
@CrazyWillTechShow
4 жыл бұрын
She says I’m special and I look handsome🤪
@gshinkey
3 жыл бұрын
could you please teach me how to paint figures
@CrazyWillTechShow
3 жыл бұрын
Sure here’s my process kzitem.info/news/bejne/yKF3t4t4b2N_goI
@RndomFX
3 жыл бұрын
chi two boxe or chi too boxe long o in box.
@BrianGreenstone
3 жыл бұрын
Good video, but why does every 3D printer video on KZitem have a grown adult male printing out toy action figures? Doesn't anyone here use 3D printers to make useful things?
@CrazyWillTechShow
3 жыл бұрын
Lol you don’t like action figures.... I wouldn’t get the clicks if I showed you how to make light holder. Here I show you how to make a box. kzitem.info/news/bejne/0aZqrW13nGaBiIo
@beauvella32
3 жыл бұрын
pretty sure its shitu box
@yeetsquared2755
3 жыл бұрын
chi-tu-box is how u say it uk
@CrazyWillTechShow
3 жыл бұрын
Lol thanks.... I’ll probably still get it wrong.
@peterparkerakaspider-manth2977
4 жыл бұрын
Sh@ter box software lol
@josephparker3957
2 жыл бұрын
Your in your face intro is not cool!.
@CrazyWillTechShow
Жыл бұрын
Because cool is what I was going for?? Really!
@josephparker3957
Жыл бұрын
@@CrazyWillTechShow Made me spill my coffee lol.
@CrazyWillTechShow
Жыл бұрын
@@josephparker3957 omg now that’s not what I was going for sorry 😬 just trying to get peoples attention, not spill peoples coffee.
@fartsniffer1093
7 ай бұрын
I havr a question if u come with multiple stl file body arms head and leg how do u make them equal size if u resize for an example if u resize the body to make it smaller how do u resize the arm to make it fit on the body u resized it?
@CrazyWillTechShow
7 ай бұрын
In your slicing software there’s a size percent starts at 100%, so if you want to skillet up, use the percentage for an example 200%. You’d upscale the whole project 200%.
Пікірлер: 110