I just want to say you did a great job of the breakdowns, it gave me a lot of info, I also like that you broke up the video and let people know they can quit watching if that's all they are looking for, great video man!
@ralphsantiago850
Жыл бұрын
shoul i call this .... weeb tool?
@ismailv309
2 ай бұрын
I didn't know that Jonny Sins has a Tech page, dude is everywhere!
@TravisNewton1
2 жыл бұрын
Measure time is how long should it be measured for. I like 30 seconds for a more realistic load. Interval time is the time between tests. I like to do 60 seconds because it gives the drive and OS some time to settle before going into the next test.
@locant23
2 жыл бұрын
I rolled my eyes at the little faces. and then now I'm laughing my butt off. I've seen your videos pop up a lot so it's time I subscribe. Very informative and to the point videos!
@DJizLurch
3 жыл бұрын
I appreciate the time and effort that you put into this to VERY detailed tutorial! Definitely good insight and information that I always wanted to know, but never really got around to looking up, but this vid gives me it all! #MorePOOOOOOOOOOWERRRR 😈
@zgagacz
2 жыл бұрын
Great video! You spent time and effort to make the info clear and easy to understand, that's appreciated. Well done!
@TurtleSauceGaming
2 жыл бұрын
Yeah! Another cultured man using the cultured version of Cystal Disk
@shinep_ag
7 ай бұрын
the developer is pretty based
@RazorTeam
Жыл бұрын
yeah, great videos buddy.. greetings from Philippines.. great review.
@rontarrant
2 жыл бұрын
I'm trying to determine if my system drive is nvme or not. The laptop is old and was given to me by a friend and he doesn't remember. I ran CDM twice, once with nvme SSD selected and once without. Results were pretty much the same, about 2 mb/s faster on the Default setting.
@MaxNMotion
Жыл бұрын
Excellent tutorial. Wish all tutorials on YT were this useful and clear at the same time.
@robertweekes5783
2 жыл бұрын
I was really confused by the Crystal Disk Info... didn't realize it was a completely different (simpler) program. lol Very helpful !
@satysin630
3 жыл бұрын
A solid breakdown of CrystalDiskMark 👍
@TechIlliterate
3 жыл бұрын
Questions are welcome! Thanks for watching and please don't forget to LIKE! It helps a lot :)
@leoutriainen
3 жыл бұрын
Am I right in assuming that the latency(the number under iops) should be as low as possible?
@TechIlliterate
3 жыл бұрын
@@leoutriainen Yes. The lower, the better
@felipevellasco6526
2 жыл бұрын
Thank you friend. You explained every bit of it perfectly. Exactly what I was looking for.
@Harry_crypto_investor3634
2 жыл бұрын
I have a Kingston A2000 ssd nvme m.2. it should be 2200mbs read, but, as I expected seeking this program, its doing the HALF than it should. its 1100mbs read and 1000mbs writee.. so.. what a fuck? Im on windows 11 lastest stable version, I've been noticing this slow problem issue since I bought my pc and installed win11... Idw what to do bro.. it simply does not make sense. and PLUS, crystaldiskinfo doesnt work at all, so Im simply unable to see my own ssd temperatures.. it doesnt even show the device health on the sistem.. MAN why it doest work properly.. I payed for 2000mbs and somethimes I go copy some file (inside only nvme, not between ssd an HD) and the speeds just go like 400mbs.. 140ms... 600mbs... it NEVER got 2000mbs. idw what to do anymore.
@jeffreymaugenest
10 ай бұрын
Thank you for putting this together in plain language. Appreciate all the effort you put into making this video.
@UnhingedSami
10 ай бұрын
I got a gen 4x4 advertising 7400MB/s read and write but after testing i barley got 3216.96 MB/S
@iamakash_
Ай бұрын
Uninstalled the Normal edition. installed Shizuku edition. (Man of culture moment)
@cubytischer
Жыл бұрын
My Benchmark read 11540.78 write 13831.19 It is fast 🙄😃 i have Patriot 1TB 1.4
@KaneBear1
Жыл бұрын
1:26 Nooooooo, you ruind it for me as well xdd
@JoeMurphysGuitarlessons
10 ай бұрын
Great video, can this be used to get info on transfer speeds between drives and pc memory cards etc ?
@Rsivordog
3 жыл бұрын
Hey, great video - thanks for making it! Question - I have been having trouble downloading games from Steam lately. I keep getting a "download paused, disk write error" message. I downloaded this software and ran the test, and the bottom 2 in the write column came back with zeros. I have a Sandisk Ultra II SSD. I'm thinking this indicates a problem with my disk. What do you think?
@TechIlliterate
3 жыл бұрын
Definitely sounds like an issue with the disk. Is it your C: drive? Download a disk checking utility or use the command prompt.
@Rsivordog
3 жыл бұрын
@@TechIlliterate Hey, thank you for the response! It is not my primary drive - it is a drive I added for extra storage for games, music, etc. My OS is on a different drive. I guess my real question is - if those tests come back with zeroes in the bottom right two columns (my settings were at 5/32gb, if that makes sense to you), does that indicate that I likely have a problem? In any case, you have my sub. Thank you for making videos like this, and for being responsive!
@TechIlliterate
3 жыл бұрын
@@Rsivordog It seems like there is a problem but that doesn't necessarily mean the drive is broken. Could be any number of things. Personally I would start with CHCKDSK in the command prompt, re-plug the SATA cable and check for malware. Thanks!
@Mainbusfail
Жыл бұрын
Dude, just because you shared the analogy of how threads, etc work. Got a Sub and Like. Thank you man.
@atlantic_love
2 жыл бұрын
My tested drive is a WD WDS200T2B0A Blue 3D NAND 2TB PC SSD. It has advertised read / write speeds of 560 / 530 MB/S, respectively. Running this program it is showing 285 / 268 MB/S 😥😥😥😥😥😥
@TardlerDesigns
2 жыл бұрын
i ran the same test on my C drive, 1st row 2029/1680, the 2nd row however is 1860/50? is something failing?
@TG-Maverick22
9 ай бұрын
Thank you so much for this explanation, greatly helped me. 5/5
@RayDaniels-c9h
9 ай бұрын
Great vid with Great presentation. Thanks for the time & effort put into this. I totally agree with most of the comments here as I've used this b4 but been too lazy to go into any depth of understanding the results. Now I do understand so much better I will check my drives again. Ray D.
@georgikukov5129
9 ай бұрын
Great video, straight to the point, with a little nugget of explanation boiled down to the essentials! Thanks!
@user-blabla-47854
2 жыл бұрын
I hoped for more detailed explanation of technical details, like queues and threads.
@Gareeb87
5 ай бұрын
… aaaand now I can’t unsee the faces. Great video btw. 👍🏼
@hendrik4427
2 жыл бұрын
My ssd gets 127mb in SEQ1M Write Speed and the manufacturer Said like 550mb 🤣
@DVNT
2 күн бұрын
there's no option to choose a drive on this software for me. Seems like it only tests the C drive?
@taylor22222222
2 жыл бұрын
Liked for the whimsical faces :D Honestly, thanks for the guide! I just picked up a gen 4 nvme upgrade for my Galaxy Flex2 Alpha over the gen 3 currently installed. Just waiting on backups now :D Interesting to see what kind of performance I'll pick up.
@taylor22222222
2 жыл бұрын
Update on the upgrade: nearly every type of test shows consistent improvements being close to or at advertised read/write speeds. I've noticed things are a lot more snappy, and I've also noticed that GTA 5 w/mods can play happily without the occasional stuttering as before. I went from a Western Digital PCIe 3 512GB NVMe up to a PCIe 4 Samsung 980 Pro.
@gibbs-13
2 жыл бұрын
What is the difference between normal and shizuku except the kawaii girl?
@TechIlliterate
2 жыл бұрын
That's really the only difference.
@Anreii
2 жыл бұрын
for some reason my second write speed is better than my first by a fair bit?... same when I retried it too lol.
@rodin0100
2 жыл бұрын
my western digital an1500 1tb only shows 1600 mb/s while it's advertised for 6500.
@coffebeans631
4 ай бұрын
How to unsee the faces now? Great vid mate!
@Random-yz8gb
2 жыл бұрын
I have wd pc sn 730 and I am getting 2700 read and 500 write which is way lower than advertised what should I do
@controversialrebel5639
Жыл бұрын
Excellent tutorial, many thanks.
@F4rva
2 жыл бұрын
Shizuku edition for life bitches ayaya
@rachitsinghvi6592
2 жыл бұрын
amazing vid, i have just brought a new WD SN550 500GB SSD and crystaldiskmark 8's SEQ1M Q8T1's result for my SSD is around 1600 MB/s which is very low compared to 2400 MB/s as advertised by Western Digital, should I return my drive and replace with another one or this normal?
@neilcarman6970
3 жыл бұрын
this is hands down the funniest tech breakdown video i've seen, thank you
@Phelly2
2 жыл бұрын
1:30 you fucked me up with this one. Windows will never be the same ever again.
@gb4939
3 жыл бұрын
Thank you very much for this video. But I don't understand why there is not a software wicho could just translate those numbers to say to the user : "ok your hard drive is fine or not".
@lucaspoole8866
Жыл бұрын
If there drastically different then the manufacturers results consider getting a RMA??? What is a RMA?
@TechIlliterate
Жыл бұрын
Basically an exchange from the manufacturer. It would be easier in many cases to return it to the store.
@lucaspoole8866
Жыл бұрын
@@TechIlliterate oh ok haha ty man
@Sinodom
11 ай бұрын
Dude this video is amazing, you're awesome thanks buddy!
@amincatallo
3 жыл бұрын
Excellent explanation, i understood many things about the software that weren't clear to me.
@aliservan7188
2 жыл бұрын
Any idea how I test a network drive? Specifically a NAS?
@Jakob-W
2 жыл бұрын
hey is it weird that my SSD puts out higher numbers on real world performance over peak? Also its a Sata SSD (Crucial MX500) rated to 500 MB/s but the benchmark says 7019.41 MB/s read
@TechIlliterate
2 жыл бұрын
That seems way off! Unless you have accidentally found a way to widen the SATA bandwidth.
@lcvenusaur2168
2 жыл бұрын
36 write speed when advertized is 450 :( what do i do??
@vinrave
Жыл бұрын
I have 7085 read/ 6786 write with my 990. How do I check the life span of my mve?
@TheChocolatBlanc
2 жыл бұрын
116MB/reading at best. Let’s freaking go takes 10 minutes to load an heavy game.
@alep-u8g
2 жыл бұрын
I have a few question, does the space of storage affect the test result ? If I choose another storage partition with more space of storage than the other, is it gonna represent the result of my storage device or it just represent the result of that partition ? Anyway, great video !
@RealKeytones
Жыл бұрын
I think the only time the space of storage would effect speed is when there isn’t enough room to fit the data. I could be wrong though
@darkslashhero
11 ай бұрын
10:20 don't forget the most important thing
@ThatOneOddGuy
Жыл бұрын
Alright I bought a samsung Evo white micro sd card Advertised speeds read: 130MB/s Write
@skygazer2678
Ай бұрын
For some reason, my both gen3 ssd in my G15 5515 give me 1800s MB/s read speed instead of advertised 3200 to 3500 MB/s. If it was only one I could have thought its ssd fault but it happens with both the ssd. Actually three, if we count the Dell's own ssd which came with the laptop. Other two are Acer FA100 1TB and Crucial P3 1TB. Any help would be appreciated.
@RBoop
Жыл бұрын
Hello, I bought a new laptop and I have doubts that the disk is not new, but used. CrystalDiskinfo shows: Total host reads: 947GB Total host writes: 889GB Power on count: 748 count Power on hours: 50 hours I have installed only Wnidows 11, 140GB for games and some small programs. Is it normal to have so many reads/writes operations?
@AyushKumar-m9u7r
Жыл бұрын
Takla 😂😂 in Hindi ( टकला ) Oo I see you are only understand in fattu English. So in fattu English the meaning of takla is- ATRICHOUS Maar moj ( मार मौज )
@NagaAmonTemple
Жыл бұрын
Hello, Your explainations are very usefull. but for me (I am french) you speak a little bit too fast...but anyway I appreciate.
@TechIlliterate
Жыл бұрын
Je m'excuse. Vous pouvez ralentir la vidéo dans les paramètres.
@karlclintsman2950
2 жыл бұрын
I don't have the settings tab you do
@chakrameditation6677
Жыл бұрын
THIS WILL DESTORY YOUR SSD. It writes far more than you think. 1-1 gig is actually around 60 gigs. All benchmarks can ruin your ssd if ran too much.
@Sujoydey-pn5nu
2 ай бұрын
The download of CrystalDiskMark 8 Tsukumo Tokka Edition was discontinued on December 31, 2021.
@nickvirgili2969
Жыл бұрын
Am i lucky with a crucial p3 1 tb with read write of 7928 7042, respectively, and thats slower than the two 9000 plus tests that ran before, default on everything and nvme selected. Is my score that good? Its the newest version, whats giving me those speeds?
@angrymidget4728
Жыл бұрын
"Just a smidge" Oh, will prolly be like, 40 or smth "at 65" Oh, cool so it's double *sips tea* "thousand" *pffft!!*
@iedxt9786
3 жыл бұрын
My first row is 2485 to 1816.06 and my second row is 1678.22 to 1797 is that bad? For an m.2
@Its_Only_Money
2 жыл бұрын
Thank you! Also, would anyone be able to tell me if Crystal Disk Mark leaves any of the 1GB test files on the C Drive that I would need to delete to get the space back or no?
@TechIlliterate
2 жыл бұрын
Nope
@Parax77
2 жыл бұрын
None the wiser, why? because numbers are all well and good.. but it doesn't answer the question "which should I use for windows partition and which for game data"... I have a drive (a) that hits 4600 in SEQ1MQ8T1 Read and 27 in RND4kQ1T1 and another (b) that is 3100 in SEQ1MQ8T1 Read and 65 in RND4kQ1T1 one of these will suit windows C Drive better than the other and one will suit a game drive better.. but which is which? do I have a good A& B pair? or do I chuck a bad one and get two A's or two B's?
@wpelfeta
Жыл бұрын
Most normal usage is going to be closer to the Sequential Read/Write, because most of the time when loading games, opening documents, playing media, it's all going to load relatively large files/assets. The only time 4k random read/write is going to be important is typically for reading/writing to very small files, like config files. The only time I could see 4k read/write being a bottleneck would be booting/updating an OS or something that needs to touch lots of small files. I usually look at the 4k as a "worst case scenario" performance score and mainly focus on the seq for real world performance.
@thesilentgeneration
Ай бұрын
I went to the site and all I see to download is Retro. I downloaded what I thought was for Win 11, but when I run the app, I don't get the same interface that you show on your site. Also, I tried to remove it from my system, but it will not remove. I tried Revo uninstaller, but it didn't show up. I tried the usual Win 11 delete, but It just kept spinning. Furthermore, I tried File Shredder, but that did not work. What to do?
@eskimo4130
2 ай бұрын
Excellent video dude. Wonderfully described. If you would like to expand on it you could talk about real world use representation of numbers, and if that's possible. Cheers
@nicholasrosella2952
4 ай бұрын
Im very new to this so I understand very little. I used this benchmark on the family desktop and row 1 was 161mb and row 2 was 183mb. I thought that row 1 is the theorietical best and the second row is what it will reasonably do. Its worth noting the desktop uses a hdd
@CarlKahler
Жыл бұрын
What is close to the advertised speed my drive is advertised at 7300/6900 and is only 6400/6225 does that seem within the allowed?
@holotape
3 жыл бұрын
1 GiB is one GIBIBYTE. Similarly a KiB is a Kibibyte and MiB is a Mebibyte. This usage is a more accurate description of the number of bytes, or at least a not-inaccurate one. We think of a kilobyte as being 1024 bytes, but actually that doesn't really make sense since kilo means 1000. The more you know 🌠🌈
@plkh9602
2 жыл бұрын
Thanks Steve! It’s exact and let’s also talk about Windows showing « GB » for drives free space when it’s actually Gibibytes by looking in disk’s properties.
@TheEndOfNether
Жыл бұрын
I thought this was explained pretty po orly. A “Ki *lo* byte” is equal to 1000 bytes, but a “Ki *bi* byte” is equal to 1024 bytes. The same thing occurs with bigger numbers, the “bi” will always mean 1024* of the previous size, while the metric version obviously means 1000. To address the comment below; windows will show storage size in mebibytes, but will incorrectly label it as megabytes. So if you see your 1TB drive saying it’s only 931GB, that’s normal, and just means windows is stupid, because it for got the “i” in “GiB”. But I’m not sure why they calculate it in GiB anyways.
@fredshead3956
Ай бұрын
Hi there nice video, just one thing if the numbers are low could it be something other than the hdd/sdd like the cpu or ram chips for instance...they all have to work together....F in Uk
@SerenoOunce
9 ай бұрын
There is 0 point in testing with over say 2GB. There's no real world application where a drive will be stressed in such a matter. Just wearing the drive for no reason for redundant result figures.
@playeromaximo4382
3 жыл бұрын
Can I test a new drive through a USB 3.0 enclosure (like a laptop) and still get accurate readings, or does the new drive need to be hooked up inside (in a desktop)?
@TechIlliterate
3 жыл бұрын
Yeah you can test via usb. You will be limited by the bandwidth but as long as the devices speed doesn't exceed then it's not an issue.
@mama2457
Жыл бұрын
what does it mean if the read of my SEQ1M Q1T1 is half of my SEQ1M Q8T1? Is there something wrong?
@k2000pvc
2 ай бұрын
I think you need to create part 2 of this video to explain where these theorical concepts are put into perspective with real world usage like Operating system operation, gaming, winrar, etc.
@Gamingcs11692
5 ай бұрын
Something to know that you won't hear any Affiliated videos is that the results also depends on your system. Some systems will be different so don't expect to get the same numbers you see in the videos.
@thegizmoguru
3 жыл бұрын
Does someone know why the developers of this software caution users right below the download link that “CrystalDiskMark may shorten SSD/USB Memory life” ?
@TechIlliterate
3 жыл бұрын
Because flash memory has a finite amount of writes and using the software will use some of that life. Not to worry unless you plan to use it a lot. For example my 500gb samsung ssd has 28, 000GB in writes but still has 97% life. I've had it for 6 years.
@Craze_Lifter
3 жыл бұрын
@@TechIlliterate " 500gb samsung ssd has 28, 000GB in writes but still has 97% life " how do i check these things on my pc?
@TechIlliterate
3 жыл бұрын
@@Craze_Lifter This is the number reported by HWiNFO. Good software for diagnostic info.
@thegizmoguru
3 жыл бұрын
@@TechIlliterate thank you for the swift reply. I was going to install this utility on a friends laptop but had the jitters when I saw the disclaimer on their website Since my friend would run this utility at most 3 times a year their PC ought to be fine
@dreamaera
2 жыл бұрын
Am I missing a joke when you say it's important to put your computer on top of your desk?
@TechIlliterate
2 жыл бұрын
kzitem.info/news/bejne/k6KjzHpmpGSGloo
@Hadw04
7 ай бұрын
i have a very high read speeds goes up to 3000 mb/s but my write speed only goes up to 300 mb/s any one know why or is this a really big problem ?
@cokezero1
2 жыл бұрын
Long-winded and not at all helpful for what I was looking for. What do these numbers mean for the real world applications
@dsee1774
Жыл бұрын
There is also CrystalDiskInfo/Report....Is it the same as CrystalDiskMark ?
@Layarion
Жыл бұрын
2:57 "but if they're pretty far off" he says, while making a video for noobs - who have no idea what "far off" means. is 1MB off far off? or is 1000MB off "close enough"?
@TechIlliterate
Жыл бұрын
My bad bro, I thought it would just be common sense.
@supernova-4420
2 жыл бұрын
best explaination ive heard yet! and funny too xD
@RayanMADAO
2 жыл бұрын
my rated speeds are 1700 write and 1400 read but somehow I got 2077/1615 in my test (in the 2nd more realistic row)
@fcfdroid
2 жыл бұрын
Okay the whimsical little faces made me laugh 😂
@HectorValenzuela-j3r
10 ай бұрын
Im looking for a program to test the power on hours on my hard drives, any suggestions?
@mapleboii2849
Жыл бұрын
Thanks now all I see are facing now too 😅🤣😂 for my drives
@Taykeith1544
Жыл бұрын
thanks just found out my ssd was failing system was feeling way slower than usual and stuttering!!
@DeanoEssex
2 жыл бұрын
Apart from H2testw what is the best alternative for testing my SSD to see if it really is 2TB? I read that we shouldn't use H2testw on SSD drives.
@TechIlliterate
2 жыл бұрын
Any test will shorten the life of a solid state drive but it is so miniscule in the grand scheme that it isn't worth worrying about. By the time the thing dies you should have upgraded to some new faster tech many years before.
@nightchrome1076
2 жыл бұрын
excuse me, I'm testing my micro sd caard. when beginning testing, no process, stuck in 'create test files'. how long does it take to create test files?
@TechIlliterate
2 жыл бұрын
I have not seen this issue. How big is the SD card?
@nightchrome1076
2 жыл бұрын
@@TechIlliterate 1 TB sd card. i use another speed test, gosh 4mb/s write. Also apply to my pen drive which have around 8 GB. Stuck in create
@josenataliogonzalez3807
9 ай бұрын
WHat do the numbers mean in Crystal Disk INFO?
@jmscdy
Жыл бұрын
Just did this but all of the Read and Write sections are zeroes, what does this mean?
@alibrahim99
3 жыл бұрын
the 100 comment .... thnx non important info. شكرا عفوا
Пікірлер: 275