Твои безумные настройки, помогают лучше понять возможности Twinmotion. 👍
@mcandelas5
Жыл бұрын
Rotation moves the object around, so you can have the back of chair facing you or away from you. I'm using 2023 so there is a drag button. Thank you for this video!
@jskup
7 ай бұрын
Thanks. If you have an idea how to make the car move at a certain time in the video and stop. Fornow I think a translator would work better because I can set the moment when it starts
@gretheconnerth
2 ай бұрын
Hi, I noticed that when adding the spot light to the custom path it only shows up when the path is activated but not when its inactive and you only want to see the light moving/floating over the floor. Would you know how this could be fixed?
@macroiu3778
2 жыл бұрын
i wonder if a helix path can be made in twinmotion at which the initial radius is smaller than the terminal radius? many tks for showing this in your coming video!!
@ArchitectureVanguard
2 жыл бұрын
That is a good question. In theory it is, just have to adjust the custom path node locations to create this.
@baan3d
3 жыл бұрын
Thank so much
@ArchitectureVanguard
3 жыл бұрын
You are welcome!
@omw9965
2 жыл бұрын
When i add material to custom path, example a aircraft, the lights get excluded, cannot merge materials, 3 days using twinmotion, any suggestions why cannot add multiple objects in custom path..
@ArchitectureVanguard
2 жыл бұрын
That is weird, I would make sure your TM is updated but from there, try and add all those object into one group/folder before adding them to the saved object. I would try that but it could also be that adding the whole folder is the problem instead of the objects themselves to your custom object. Hope that helps.
@seance0
Жыл бұрын
Only one object is there na?Can we add another model too in this motion path ? Increasing object count.
@ArchitectureVanguard
Жыл бұрын
You can if you use a series of objects saved into one user object.
@kyokokawai5558
2 жыл бұрын
I have a tough problem. Please help me. I'm making a video of a construction site. I've been using twinmotin for three years. However, there is a trouble for a long time. I want to know about custom paths. I don't pass at the right time. Is the second setting bad? It's not a good time!!! What is your advice on setting seconds for custom paths?
@ArchitectureVanguard
2 жыл бұрын
That is hard because we only have so much control with the custom paths and animations. Unfortunately there is no way to my knowledge to control animation timing on paths, which is too bad. I feel your pain!
@kyokokawai5558
2 жыл бұрын
@@ArchitectureVanguard Thank you very much. Can't I do? Only I? My question was settled. Only I was wondering it was possible. All the while, these more than 2 years were a question. Thank you very much. I'd like to show you my work. Also give my best regards now. 😁
@dietmardejori1161
2 жыл бұрын
Very good video. Question: Can i change the character of the inserted single person in a custom path. For exemple: tune animated human "Michael beach" not in normal walking mode but in "swimming 1 mode". Greetings from South Tyrol in Italy.
@dietmardejori1161
2 жыл бұрын
I found the possibility myself... now I can animate my pools with swimming figures.
@ArchitectureVanguard
2 жыл бұрын
Very good! Custom paths are fantastic. Thanks for the comment, and hello from Denver, Colorado!
@1986ArtC
2 жыл бұрын
Greetings, Is there any possibility within TM to use a camera path? Ex, to simulate a vehicale movement as a driver? Thank you in advance.
@ArchitectureVanguard
2 жыл бұрын
You could create an animation in that the camera could serve as the car when exporting or viewing the animation.
@1986ArtC
2 жыл бұрын
Thank you for an idea. Alas it is too general. Could it be possible to make a video on achieving the given camera animation? I would be great.
@faitfranco7861
2 жыл бұрын
Very nice video, I learnt really a lot from your videos. The only thing that I miss is, how to take off the yellow path from the screen, and leave all the animations? Thank you.
@ArchitectureVanguard
2 жыл бұрын
I would start by deselecting the path but besides that, there is not a ton that can be done. The line will not show up in exports so you do not need to worry about that. I would look to exports if you want to make sure you do not see the yellow line.
@dynamicdesign9484
2 жыл бұрын
You can press G on your keyboard to turn the yellow path on and off.
@Shadow_Zion
2 жыл бұрын
Incase you still didn't know, reverse just makes the object "walk in the opposite direction"
@ArchitectureVanguard
2 жыл бұрын
You are correct!
@Orozco_PNW
2 жыл бұрын
Is there a way to animate objects brought into Twinmotion? I am trying to use arrows I've modeled in Sketchup...
@ArchitectureVanguard
2 жыл бұрын
Yes! There is an animator tool that can be use to translate and move object! check out the tools in TM. I also have videos made on the animation tools.
@Orozco_PNW
2 жыл бұрын
@@ArchitectureVanguard I love the translate/rotate animators! I just wish there was a way to put imported geometry on a path as well. Seems like potentially through the custom user library? I will test that out...
@martinezq1
2 жыл бұрын
In lumion is easy.. all object on path are moving in position you start. I have problem in TM with train cos few cars are not moving as expected
@MTBDerek
3 жыл бұрын
Good explanation of how this works. Do you happen to know of a way to get the model to twist with the path? As in go up lean over then straighten back up again.
@ArchitectureVanguard
3 жыл бұрын
Hmm, that would be a combination of adding an animator to a object and adding that object to a path as a custom user object. The problem with that might be getting the animation to work with the path. Having a specific animation that depends on location of the object may prove to be difficult whereas a constant animation along a path is easy enough.
@engkma1876
4 жыл бұрын
thsnk you so much for vedio ... but please one qoustion ... why not export sound for animation vedio after rendering ,how can solve problem ?
@ArchitectureVanguard
4 жыл бұрын
I would check to make sure you have added sounds, the settings of the sounds (is the camera close enough to hear it?), and check video export settings to determine if you have the sound on to export. Hope that helps!
@danielkovac2425
3 жыл бұрын
After importing an object, it sometimes happens that GIZMO is very far from the center of the object. How to fix it Thanks
@ArchitectureVanguard
3 жыл бұрын
That is a great question. I do not have a specific fix for it but from what I can tell, it has everything to do with the origin of the model you export from the modeling program you use.
@anantpednekar5099
3 жыл бұрын
before import always try to fix that object should be at origin
Пікірлер: 40