Just got my S61. What a gorgeous instrument. The screen is beautiful, crisp, large. The LED lighting is beautiful with support for so many colors. After owning the MK2 version, I’m finding using the screen more now and forgetting there’s PC. I’ve only spent a little bit of time, but hoping NI does more to improve efficiency of finding sounds. With over 60K presets to chose from, hoping for even more filtration/sorting/navigation improvements. Also, hoping other plug-in developers, like UVI jump on board with NKS2!
@iMacTube
9 ай бұрын
I upgraded too but checked my both mk2 and MK3, I’m confuse…The keys sound very low (not like sound but like range) when I press my fingers on them. for example with Genos or MK2 from mid-range the sound appeared. on the MK3 there are times when the notes do not sound unless they are pressed all the way down. MK3 it’s setting in default key not hard1 or 2… I'm not a maestro but I've been playing the piano for about 20 years and I've never seen anything like this on any other model. I understood that it has aftertouch technology, but Roland also has it and the keys sound even if they are not pressed all the way down. I was trying aftertouch off but the same issue - any suggestion? i feel like going back to my mk2…
@NativeInstruments
9 ай бұрын
Can you please reach out to our support team with more details so we can have a closer look? You can contact us through the form over here 👉 bit.ly/n1kontrol
@iMacTube
9 ай бұрын
@@NativeInstruments I did it guys and still waiting your answer… hope that will arrive, but meantime let us know if this is a factory problem or software issue…
@terrygray7465
7 ай бұрын
My S61 just arrived today. Watching this video before hand made the setup a smooth experience. IMO the keybed is an improvement over the S61 mk2's.
@JensRefshoj
4 ай бұрын
Is the keybed less noisy? I asking because my MK2 making noise
@terrygray7465
4 ай бұрын
@@JensRefshoj It's much less 'clacky' than the MK2. The keys have a softer/lighter feel.
@830jkl
2 ай бұрын
@@terrygray7465That’s nice to hear. 🎹♥️
@RazOfTheVoid
7 ай бұрын
Just got mine yesterday and I've been having a blast with it. The only note I would have is that I'm not sure I can use it properly live. Because, as far as I can see, there is no way to load several plugins SEPERATELY. You can merge them, but you can't switch between them. Not when Kontakt 7 is running and not in Komplete Kontrol. If I play live, I usually have to switch between at least 2 sounds per song, usually more. So that would have been a helpful feature. I know you can switch instruments using a daw, but that's a bit clumsy to do on the go. Plus it means moving pass several instruments to get to the one you want. What really would have been amazing is if we could have Kontakt running, load up all the instruments we want to use and assign them to their channels, then use the top buttons to switch between them on the fly. If that is an option now and I just didn't realise it, I'd appreciate if someone could tell me how to do it. If it's not an option now, seems to me like it's something you guys can maybe add in a firmware update? But all in all - especially for using in your home studio - this keyboard is an absolute killer!
@TheEwok442200
10 ай бұрын
I can't buy this yet until I get Maschine integration, I don't understand why its not included?
@woofer8395
10 ай бұрын
Maschine Daw 3? Maschine MK4 ? Uhmmm
@NativeInstruments
10 ай бұрын
We're looking into ways to extend the integration at the moment. 🙏 For now, you can use they keyboard as a regular MIDI controller.
@woofer8395
10 ай бұрын
Waiting KOMPLETE 15 COLLECTOR'S ♥️
@wendydelmendo8574
10 ай бұрын
Cause Native Instruments think people who use Abelton and Logic Pro don’t want to use the plethora of samples and effects and instruments that Logic Pro comes with, or the Ableton’s Push 3 and plethora of sounds and instruments that comes with Ableton. NI thinks those DAW users want to fork out a couple more hundreds on a Komplete Ultimate suite, then fork out a couple more hundreds for one of these Midi controllers that only has 8 rotary knobs ( no pads; no faders, no touch screens). I mean there is a class of producers that would do that; only they use MASCHINE!!! People who mostly produce with Kontak instruments are using Maschine!!😡
@hvhvgitaar
5 ай бұрын
@@NativeInstrumentsIf NI is “looking into ways to extend the integration” at this point, long after the product has been designed and built (without the necessary buttons), NI seems has an incompetent product design team. I am shocked…
@BuenoLaidley
10 ай бұрын
Please make the keyboard be able to show the names of all device parameters in Ableton (and also be able to switch between them) like how the Ableton Push or Novation SL Mk3 keyboard does it.
@cyberspacer
5 күн бұрын
Oh yes!!! that would really improve things for Ableton users! Is this in the pipeline?
@Andre-Vossen
10 ай бұрын
Got mine S61 today. Works fantastic. Installation was no problem. 👌👌😉
@jmetzgermusic9072
5 ай бұрын
What DAW are you using, on Reaper it's a mess
@Andre-Vossen
5 ай бұрын
I'm using Ableton. Works very good for me 😉
@tonybroadbent6067
3 ай бұрын
Just got S88. This video made it a lot less daunting. Thanks you Brian for very clear explanations.
@MiriAstro
10 ай бұрын
These are the best videos and greatly appreciated!
@bonaventura_AKA_ben
10 ай бұрын
So many home runs on this one. The display is absolutely gorgeous. The NKS integration is so refined that I might actually use Arturia vst’s in Komplete Kontrol rather using Analog Lab for preset adjustment. The play assist features makes me so happy that I might forget wishing I had taken music lessons as a kid. The polyphonic aftertouch is also a great addition. And then NI reminds us of why people get so irritated with them. You’ve heard this probably thousands of time at this point, but do you honestly believe we’re going to adjust our daw mixer settings with knobs? Where are the faders? Good grief guys you’ve had years to work this out! If you were Apple I’d say you were trying to maintain ‘The Aesthetic’ or Form Over Function, no matter what people want. Jeez take a lesson from Arturia and their layouts, or Novation, or about a billion Chinese knockoff brands. Faders guys faders.
@NativeInstruments
10 ай бұрын
Thanks for your feedback! There are no faders nor pads because we wanted to focus on the instrument experience, making sure you get the best out of the NI & NKS instruments 😇
@nabilchaouli3489
10 ай бұрын
this reply makes no sense
@smokey5100
8 ай бұрын
I just bought a MK3 s49 last night specifically to use the aftertouch capabilities together with my Maschine and I'm extremely disappointed to find it out that there is no Maschine Integration. The DAW controls don't even work. This is a major mistake and I hope you guys prioritize and fix this in an upcoming update or tbh I may have to take it back. And for the record I love your products. I've been a Maschine user ever since MK1 to the MK3. We are committed to your products and you guys should be too.
@SunlightOfTheSpirit
7 ай бұрын
Really wanting this. I have the Applied Acoustics and Arturia and have an old Novation controller that I'm sick and tired of mapping. This looks like it would be a joy to play with these plugins in Live.
@SchwizzZer
8 ай бұрын
This is really intuitive. Would be great if you could demonstrate in another episode on how to integrate Kontrol S with any hardware synth or hardware drum machine, and on how to map both Kontakt and the external devices simultaniously.
@creativedwill
10 ай бұрын
This is a great video!!! I learned a few things I didn't know😁😁! If there is a way to give us access to the Expansion kits in Kontrol software that would be amazing!! Being able to have the entire sample pack laid out over the 16 keys would be a game-changer!! The one shot and loop access is cool and glade you mentioned in the video!
@briankullas6463
10 ай бұрын
There is a way to do this using Battery in Kontrol software. If you select Battery, you can then filter by Banks which would be all of the Expansions you have installed. When you load any of the presets, it loads a 4x4 grid of the kit in Battery
@creativedwill
10 ай бұрын
Goood Stuff!! Thanks!! @@briankullas6463
@830jkl
3 ай бұрын
@@briankullas6463That’s how I access them.
@johnnieray2423
10 ай бұрын
Got mine today ..again... musicians friend may have sent me one 3 weeks ago and it needed sent back to ni.. but all is well i will be extremely satisfied as soon as i can use it with my maschine mk3 and software ..really couldn't do much because i had to put cubase back on pc and i got to call them tomorrow to get new licenses but i know you guys are working on a update...i guess you didnt realize how much we use maschine software and the maschine mk3 but its ok you guys have a great track record with me ive been down since 2018 and i have ultimate 14 and tons of exp for maschine , you guys are the best...just hurry and make it right lol
@NativeInstruments
10 ай бұрын
Many thanks for sharing your feedback with us. 🙏
@CesenaticoOfficial
9 ай бұрын
Please make a keyboard with memory inside.. the NI standalone! Where everyone could install its own sounds.. ❤
@Spineloro
10 ай бұрын
This is a great kbd, nice improvements, I dont regret the upgrade from my 61 mkII. I prefered the touch feel of the keys of the mkII though, but not a problem, I guess it is due to the polyphonic aftertouch that makes the keys touch softer on the mkIII. Thxs NI for the good work and all the free sounds/plugins that came with it. Definitely worths the price!
@NativeInstruments
10 ай бұрын
Thanks for the feedback 💛😇
@tryphenajefferson5642
5 ай бұрын
I think it's geared towards those that DON'T use Maschine, but if you ARE a Maschine user, that thing is a hard "no" instantly! If it added pads and everything else, and KEPT the Maschine integration, then l'd consider it an upgrade instead of an alternative controller for those using any DAW but Maschine.
@woofer8395
10 ай бұрын
The Mk3 keyboard is beautiful, but its software is very green, I suppose pending the release of a Maschine Daw 3 & Maschine Mk4 that complement each other well, a very forced exit. Difficult times are coming and they wanted to make their work profitable too soon.
@laynehoward2870
7 ай бұрын
It boggles my mind that NI is a software based compay, yet their software is sub-par. I'm deep into NI, been using it for about 5 years, but it is a constant battle within Studio One 6.5. It's definitely a love-hate relationship.
@itsstatic2477
10 ай бұрын
Stellar lookin keyboard! Im a fan of this new design style goin on, ive got a Maschine mk3 myself and am looking at getting a Maschine Jam and s88mk2 to go alongside it as well! Since Maschine mk3 intergration is out the window for the Kontol S mk3... Could we be seeing intergration with a Maschine mk4 when it eventually releases?
@france4me117
Ай бұрын
Very well presented however my new NI Kontrol S49 M3 seems to be stacked on the series number screen. It reads the following! Welcome! Add your serial in Native Access. I have done that and still the Kontrol S49 still stacked on this screen. Support is absolutely "Zero" and I'm really upset to the fact that I bought this. Can you help?
@remym1864
26 күн бұрын
Same here!
@jessecanizio7927
10 ай бұрын
I Just purchased the S61 MK3 and when I select the Komplete Kontrol S MK3 as my control surface the drop down boxes for the input / output do not have a “DAW” option as shown in this video. Instead, my three input/output options are “KONTROL S61 MK3”, “KONTROL S61 MK3 (port 2) & “KONTROL S61 MK3 (port 3). Am I missing something?
@NativeInstruments
10 ай бұрын
We'll need to take a closer look at this. Can you please get in touch with our support team with more details? bit.ly/n1kontrol
@mistervid
7 ай бұрын
This was (at least for me) the typical problem when the MK3 was directly attached to the computer. I could solve this by adding a separate power supply and connectiong the keyboard via USB-A to a hub.
@ryanmills6751
6 ай бұрын
I can save everyone else the trouble, you want it on port 2 for DAW controls, NI changed it or did not bother to point out its different on windows and could not be bothered to update the docs or video.
@hectatusbreakfastus6106
16 күн бұрын
I wish that my keyboard was doing the same things you are doing with such ease. I can't get the play assist to work at all. The only button on the left side that seems to work is the shift button, settings midi and arrow buttons
@mokylarry1525
10 ай бұрын
Just got mine yesterday
@NativeInstruments
10 ай бұрын
That's really cool. Thanks for sharing and enjoy your sessions!
@dariuszlis4412
5 ай бұрын
I've been using a maschine mk3 and recently bought a komplete s61 mk3. I'm very disappointed. Opening the Maschine 2 software doesn't provide keyboard integration, except for the MIDI setup. Are you joking? What's the purpose of having this gorgeous screen if I still need to refer to the Maschine 3 and manually adjust all the settings? I want to be able to control every instrument with my komplete s61. It's just not making sense to me.
@jroc2k
10 ай бұрын
I might get this
@XAXBEES
7 күн бұрын
Hello I could really use some help my play assist button, plug in and browser buttons on my keyboard are not working
@kai6424
24 күн бұрын
Can you do daw configuration for Fl studio?
@basscut
10 ай бұрын
Looks great! It would make for a awesome keyboard controller in addition to Push 3.
@830jkl
2 ай бұрын
I’m watching this video again with a different perspective. My s61 mk2 is now acting up. It’s still under warranty though sweetwater. I’m now considering trading for the mk3. I’m in the minority that doesn’t need maschine integration. I just want to use the expansions and my other collector’s edition plugins. I’m hopeful that I would have the newer keyboard longer than another mk2. As long as I can control cubase 13, studio one, and logic 10, I’ll be fine. Not quite ready to totally turn away from NI just yet. The sound quality/quantity still remains unmatched, for my usage anyway. 🎹♥️
@lesc13061998
26 күн бұрын
Nothing about the clock control, if you want to control others synthesizers with this Kontrol S49. Does it mean that is impossible ?
@830jkl
4 ай бұрын
I see many people are not happy about the lack of maschine integration. Personally that doesn’t bother me because I don’t actually use maschine, only the expansions. I don’t even open maschine software anymore, I use the expansions in battery 4. 🎹
@frankfytt5180
7 ай бұрын
How can the visually impaired activate the accessibility feature on this series? On the MK2 it was Shift + Mixer but there’s no mixer button on this one @NativeInstruments
@NativeInstruments
7 ай бұрын
Unfortunately accessibility features are not yet available on the Kontrol S-Series MK3 but please rest assured they will be rolled out in the coming months.
@frankfytt5180
7 ай бұрын
@@NativeInstruments I think it would have been great for NI to mention this on release. We have bought this keyboard and now we have to wait for months to use it
@TheKinoal
2 ай бұрын
Thanks for the video but when I load a layer instruments, it's only showing the effect library not all new instruments. I don't understand
@MrMediterrano
10 ай бұрын
Does Play Assist still only work in conjunction with Komplete Kontrol plugin or does it now also work for Kontakt, Reaktor and NKS-compatible 3rd party plug-ins?
@NativeInstruments
9 ай бұрын
Currently, Play Assist is available when Komplete Kontrol software is in use, but rest assured we're working on implementing Play Assist on device at the moment.
@TechViewOpinions
29 күн бұрын
Got my S88Mk3 and the ultimate pkg and I cannot get the keyboard to update! Please help. I bought it directly from NI in order to get the sale price and all I have is an expensive boat anker.
@paulussantosociwidjaja4781
5 ай бұрын
Superb, even though still waiting for the registration buttons and control under the keys like the pipe organs. Also, I wonder if I missed hearing any explanation on TAP Tempo?
@830jkl
4 ай бұрын
…That said, I’ll probably skip this one and get your next Komplete Kontrol keyboard. Definitely a huge fan of NI, had maschine 1, maschine mk2, mk3, on my 2nd s61,(1st one the screen died), komplete ultimate collectors edition plus a few a-la-carte expansions & plugins. 🎹
@ConstantinPhillipou
6 ай бұрын
Excellent video
@sonarfreq
8 ай бұрын
At 16.17 you discuss creating a layered Multi in Kontakt... but how does a user take the individual instruments of a Multi and create splits/zones and/or velocity triggering using those layers? I've looked online extensively but there is no in formation or clarity as to how this is done? It's such an expensive controller keyboard surely this simple operation is possible easily?
@richimbrogno4399
Ай бұрын
+1. I love the possibilities that this keyboard has for live playing but have seen so little info as to how good it handles: splits/layers, load times (i know depends on library etc), "setlist" type functionality similar to Montage, Kronos, Fantoms etc. I know this is possible with Mainstage, Gig Performer but if this can all be housed internally within Komplete Kontrol (or other) then laptop screen can be closed and set off stage etc. that would be incredible. NKS is a true Godsend. Now help with the live playing component as well, or put something out that shows what is possible with the mk3 on stage
@SvenFx-22
8 ай бұрын
interested in buying either this or the mk2. I have extensive NI software. I wanted to know the advantages of this over the mk2 Other than the poly aftertouch and screen? i use ableton primarily, but i like to sketch ideas in Maschine. is NI planning on updates for things we dont know about yet, lol. is there i reason i should spend the extra money for the mk3? i am Not being sarcastic, i just want to buy the right keyboard..i am wanting to buy one of them
@johnnieray2423
10 ай бұрын
Got mine 3 weeks ago from musicians friend but it supposedly was a demo that didn't work so had to send it back sending new one today should have it next week. I'm regretting it now that I had time to marinate and realize it may be awhile or never for them to update to work with my maschine software..even if I switch my workload to cubase again it's not supported yet
@NativeInstruments
10 ай бұрын
Hey there, rest assured we're exploring ways to expand the Maschine integration at the moment. 🙏
@Realliedoe
9 ай бұрын
@@NativeInstrumentsYes!!! You guys hear us! It may sound crazy but, Mk2 is how I actually learned Maschine. I had a Maschine Mk2, didn’t understand it, sold the controller but kept the software. When Kk Mk2 came, I used the Maschine integration and INSTANTLY understood the work flow. Thanks for listening guys.
@chrispaddon1740
10 ай бұрын
That SHIFT + Scale to activate really saved me though. You have no idea
@mattwallis1893
10 ай бұрын
Mine arrived. Can’t get it working because I can’t install Komplete Kontrol. Trying to resolve the issue with NI support.
@NativeInstruments
10 ай бұрын
So sorry to hear that. We hope you can get it sorted out soon. 🙏
@mikedurden
10 ай бұрын
I’m surprised they’re saying they spent YEARS researching and working on this, when the mk2 versions have about 95% of the same functionality. Plus mk2 has Maschine integration which this doesn’t. I see they’re now saying they’re looking for ways to integrate Maschine since so many people are calling them out on it, but now there’s no way to add in the buttons they removed from the Mk2. The only improvements are the poly aftertouch which is ok I guess (sigh), it now has 1 screen instead of 2, and some minor software navigation improvements. They can say they put a lot of work into these software improvements, but from a user perspective it’s really not adding a whole lot compared to the mk2. I’m pretty sure the navigation improvements (e.g. grouping of parameters) is something that they can integrate with the mk2, but they’ll not do this in order to try and get people to buy the mk3 for this feature while leaving the mk2 owners in the dust with something that could have been added in a long time ago. After seeing how bad this “upgrade” is they’re describing, I actually just went and bought a B-stock mk2 (which I received as basically brand new) on Reverb for a fraction of the price of a mk3, because I actually would prefer having the Maschine integration and built in buttons and it is now a wayyy better value than this. Even with the improvements of the mk3 I think overall it’s a net downgrade while they’re increasing the price.
@NativeInstruments
10 ай бұрын
Hey, many thanks for sharing your thoughts with us. Many of the features of the new Kontrol S-Series MK3 are based on user feedback and you can learn more about that in a Q&A with our product managers here: bit.ly/ama-smk3 As for Maschine integration, rest assured we're looking for ways to expand the integration at the moment!
@830jkl
3 ай бұрын
Abso-tively, well-said. 🎹♥️
@harrylariv4786
5 ай бұрын
Nice Video, thank you. I switched from Komplete Kontrol M32 to S49 MK3 keyboard. With the M32 as DAW control for Ableton live I can scrub through the track with the jog wheel, this doesn't work with the S49. Any idea why?
@shescrafty7667
10 ай бұрын
And Christmas is coming up. I really was hoping they’d add Maschine control. I sure wanted to give them my money. Im on the Maschine Plus. This woulda paired nice . The MK3 and the S61; and this and the Maschine Plus. I’ll pass on this though. A Push 3 is good enough for Abelton.
@r3m014
10 ай бұрын
Question: Does the Keyboard support selective sustain pedal (also known as sostenuto pedal) on the assign 1/assign 2 inputs?
@NativeInstruments
10 ай бұрын
Hi! You should be able to set up the pedal in Komplete Kontrol's MIDI Controller panel.
@QuantizStudioRecords
4 ай бұрын
this has step sequencer and arp for sequences?
@vnsnbeats
9 ай бұрын
Does the lightguide still only work in the Komplete Kontrol vst?
@NativeInstruments
9 ай бұрын
With Kontakt integration, you can make use of the light guide without the Komplete Kontrol software. Check out the Kontakt integration part at 06:57 😉
@ryanmills6751
6 ай бұрын
@@NativeInstruments play assist is disable in Kontakt... have you used your own product?
@clinttaylor3277
3 ай бұрын
Hi at the 6.37 min part of the video I don't have input and output lighting up on my Ableton window like he has and my keyboard isn't picking up anything out of the native access library ive downloaded the keyboard is still only showing my serial number please help me someone.
@bobkitella3202
7 ай бұрын
I just received my MK3 S61, and I have done the setup and installation. I have the latest Arturia V Collection X, and I don't get the same graphic background that you get in the video. I just have a black screen with white diagonal lines for things like the CS80 V4, ACID, etc. however the Augmented Instruments look like they work just fine. Is there something I am missing?
@susiehb2093
5 күн бұрын
Is this old? I've had my keyboard for a year and am just now trying to use it. I'm old. It's hard. Nothing is as you say it should be. I can't find the hardware connection services. I've put in the serial number. Can anyone help?
@jacquesperrotte
5 ай бұрын
MERCI BEAUCOUP
@Francesca-wo6qp
10 ай бұрын
The MK2 S61 does all this and controls the same macros inside Maschine and DAWs. So this adds nothing new other than polyphonic and they’ve mended the two screens into one. Then, they’ve actually taken away: no more Maschine software control. Who’s gonna buy a downgrade? Pass😏
@NativeInstruments
10 ай бұрын
We're looking into ways to expand the Maschine integration atm. ✌️
@Myce
8 ай бұрын
@@NativeInstrumentsupdates?
@nox4298
10 ай бұрын
Pedantic question, but would a USB c to USB a cable work as opposed to using an adapter? Just trying to use what I have
@briankullas6463
10 ай бұрын
You could use that type of cable but it may not provide enough power (The display will indicate if there's not enough power). If that's the case, you would connect an additional USB-C power supply to the other USBC port on the keyboard
@nox4298
10 ай бұрын
@@briankullas6463 ah good stuff then I have a power adapter with these specs; 5V 3A 15W Input:100-240V. I take it that would be enough?
@briankullas6463
10 ай бұрын
@@nox4298that will work, the online setup page lists these specs for the power supply "(5V, 7.5W or higher, 1.5A or higher) "
@reams3378
7 ай бұрын
Quick question...Just loaded my Kontrol S61 and the "Record group" of buttons isn't lit up? Can anyone help me as to why this may be??? Thanks.
@studioclb3089
7 ай бұрын
I wanted a master controller with PAT, MPE, and MIDI 2.0 for my hardware synths...and now after getting the mk3 s61 I find out I can't even assign midi channels. Should I just return it?
@NativeInstruments
7 ай бұрын
Please be assured that custom MIDI templates will be accessible in the near future. We apologize for any inconvenience and appreciate your patience!
@studioclb3089
7 ай бұрын
@@NativeInstruments what’s the big secret? The near future could be later today or six months. I suppose I’ll just tell my film score clients that they’ll have to wait until the near future, they’ll be thrilled. Shouldn’t a reasonable consumer be able to expect a midi controller to communicate with other midi-equipped devices?
@archerli4783
10 ай бұрын
The firmware update has a huge problem on windows!!!! I tried all your methods for 8 hours, And I still can't get my S88 working!!!!
@archerli4783
10 ай бұрын
And I don't own a Mac system.
@NativeInstruments
10 ай бұрын
Sorry to hear you're having trouble! We're currently investigating issues with firmware updates affecting some custom-built Windows systems and are working towards a fix with high priority. Please check out the linked article for troubleshooting steps. If you're still having issues after trying the suggested steps, please create a ticket with our customer support. support.native-instruments.com/hc/en-us/sections/360000091538
@aleixvivesllimona739
Ай бұрын
First of all, I have to say that I am astonished that a MIDI controller valued at over a thousand euros does not come with the necessary cable to connect it. That being said, I saw in the video that they use a USB-C host cable that fits perfectly into the round port on the keyboard. Where can I find this cable? Thank you.
@82zmam
Ай бұрын
I just got a S88Mkiii . Almost threw mine out it was attached to a small piece of cardboard in my box. It was totally unobvious
@nine96six
2 ай бұрын
Play assist tab에 있는 스케일 모드는 하드웨어에서 제어되는게 아니고 반드시 소프트웨어와 함께 사용해야지 가능했는데 mk3에서는 하드웨어만으로도 가능한가요? (Novation sl mk3처럼요) 하드웨어 모드가 아니라면 시퀀서에 입력되는 데이터는 transform 되지 않은 음들이 입력되서 전체적인 텍스쳐를 볼때 불편할것같아서 NI Komplete Kontrol 시리즈의 스케일 모드나 코드 모드등의 사용과 구입을 망설이고 있습니다
@TojiFushiiguro
5 ай бұрын
I would like to know if this update to play assist outside of komplete was coming soon and if you had a date? In addition, did you know when fl studio will be compatible with the keyboard because it will be written soon on your site thx !
@FarmerRobMystic1
3 ай бұрын
So for lack of any actual list of relevant DAW's being listed in the description as stated in the video I am left wondering what use this keyboard series has with only a handful of DAW's being able to use it? I hate Ableton with a passion and will not use it or any other DAW that is not fully customizable. Right now that is Reaper 7, SoundBridge or Waveform Pro 13. Playing favorites with DAW's is an exercise in futility and also one that will make me steer clear of any other NI offerings! Where is this list of DAW's?!
@bobbyjohnson4243
5 ай бұрын
No play assist available in Logic Pro 10.8.1??
@MusicAlfon
7 ай бұрын
Thanks for the video! Please could you tell me if the s88 mk3 keybed is heavier or lighter than the s88 mk2? I saw in your forums that you say that the feel has been improved, but not in what way. Thank you!
@goylem
9 ай бұрын
Is there a reason why there seems to be absolutely no keyboards that both control NI instruments AND ableton instruments (Push style) or have I missed something?
@jacquesperrotte9599
10 ай бұрын
Merci beaucoup
@user-jw8my9cv8g
8 ай бұрын
Can anyone tell me if the keyboard will integrate and work with pro tools 2021?
@neilingle794
9 ай бұрын
Nice video. I'm looking around for any information on integration with Reaper. My fear is that I make a big purchase (and these keyboards aren't cheap!) only to find the basic integration (KK, Kontakt) is flawed / buggy / not there. I've come from a DAW where integration isn't great, but now I'm with Reaper, I also want to know what integration is there / planned. At the basic level we're talking about the play, metronome, loop buttons at least, but also transport, mixing etc. I suspect that integration with MK2 was ok (based on some KZitem video). So, I need some certainty before making that big purchase please ;-)
@JonasDenolf
10 ай бұрын
Mine arrived but won't work either, firmware update fails
@NativeInstruments
10 ай бұрын
Can you please get in touch with our dedicated support so we can have a closer look? You can contact us through the form over here 👉 bit.ly/n1kontrol
@dannykoe919
18 күн бұрын
I've got the s61 mk3. I've had it for about 4 months and can't get it to work. I can only use my mouse for a few things. My hands are up in the air. It's a lot of money for something that doesn't work.
@producerdjaaronsmith
9 ай бұрын
I upgraded from the s49 mk2 to the s49 mk3 but I cannot find a Komplete Kontrol plugin in Live 11 or the shortcut on my desktop. What am I missing? The Kontakt 7 vst works fine btw
@NativeInstruments
9 ай бұрын
Hi, can you please reach out to our dedicated support so we can have a closer look? You can contact us through the form over here 👉 bit.ly/n1kontrol
@davidwatson1448
8 ай бұрын
Is there a way to create ‘songs/live sets’ from Komplete so that you can use the keyboard itself to advance from preset to preset as you’re playing live?
@NativeInstruments
8 ай бұрын
Hi, could you please contact our support team with more details about what'd like aim to accomplish? bit.ly/n1kontrol
@tutubeos
10 ай бұрын
Waiting for this: - Hey AI, install this new keyboard in my system… - Hey User, I’ve already configured everything when you plugged in the cable. I opened a new Ableton Live project ready for you to play with your new keyboard. And please, write good music this time… or I’ll do it better than you 😅
@jmetzgermusic9072
5 ай бұрын
Any word on official Reaper support?
@steffenfriedle3254
10 ай бұрын
It would be so nice - if the layering or splitting of sounds would also be possible with a mix of a) synth engines like DIVA and b) Kontakt .. Also combinations of splits and layers .. At my opinion this is one of the missing parts to get to a replacement of a typical workstation. Finally but this would be at another end, would be sth like DANTE aka networks instead of USB ..
@ShitmanMusic
10 ай бұрын
I neeed a white keyboard from you please I dont care if its the mk2 or mk3 please bring it baaack
@ilandzmusic7848
10 ай бұрын
Where do you buy that usbc dongle?
@synsongs
10 ай бұрын
It seems nothing has been reasonably tested. As an MK2 owner, I got my S61 MK3 today and trying to apply the firmware (without which the keyboard would not do anything) it failed with error -2, asking to re-power the keyboard. After doing so, it is totally bricked, only a white screen which does not go away. So frustrating and not what I have expected for NI for such an expensive device. It does not seem to be an isolated issue either and using a brand new Mac Studio should really be more than enough to get things going.
@NativeInstruments
10 ай бұрын
Brand new computers are unfortunately especially prone to causing unexpected errors, as they weren't around when testing was conducted. There is a small percentage of customers using Kontrol S MK3 with an Apple Silicon computer (M1,M2, …), who may run into problems with either updating the firmware of the keyboard (where it will not update completely), or during normal usage where certain button presses do not do the intended function. If you run into this issue, the easiest workaround is to connect the Kontrol S MK3 into a USB-C hub where it ‘cleans’ the USB communication with the Apple silicon computer, and will resolve the issue completely.
@sonarfreq
8 ай бұрын
@@NativeInstruments I'm sorry but Apple Silicon computers M1 or M2 are NOT new computers! 🙄 I'm sorry but this is a really worrying reported it seems by a number of people! I was about to purchase an S61 Mk3 but now I think I will hold off to see if you ever resolve these issues properly as the answer you are offering here is woefully inadequate for an expensive controller that could probably end up bricked!
@NativeInstruments
8 ай бұрын
Can you please try the following troubleshooting steps? bit.ly/3MelBCZ If the problem persists, please don't hesitate to get in touch with our support team directly. We'll be happy to look into it further for you.
@Myce
8 ай бұрын
@@sonarfreqyeah I find it really hard to believe that they consider m1 “brand new” and it’s a very small % of users. I just ordered a s61 and I’m worried because I’m on a M1 Mac… ._.
@NativeInstruments
7 ай бұрын
We can confirm that the S61 MK3 is compatible with M1 Mac. ✌️
@jeromekorse8495
7 ай бұрын
Tonight a brainwave: use the iPad as external screen for complet control with sidecar. Whauw! Works amzing on my mk 2!
@rabahatmani6925
7 ай бұрын
Great Tutorial, middle C erroneously identified as C3 instead of the industry standard C4 for an 88-key keyboard, is there any fix, The compatibility between my MIDI controller, the Komplete Kontrol S88 K2, and Ableton 11 Live Suite has been less than ideal. One glaring issue I've encountered is a misalignment in the piano roll, creating an inconvenience during my music production sessions. Moreover, there seems to be a persistent discrepancy in the MIDI note labeling, with middle C erroneously identified as C3 instead of the industry standard C4 for an 88-key keyboard. This has caused frustration, as various plugins consistently report the incorrect note designation. Despite my efforts to seek assistance, the absence of accessible technical support compounds my disappointment. I am actively exploring solutions and would appreciate any guidance or insights to rectify these perplexing issues in my setup.
@NativeInstruments
7 ай бұрын
Hey, our team is definitely available and able to check this out with you. Please reach out to us using the form over here 👉 bit.ly/n1kontrol
@lucas_fpro
10 ай бұрын
Hello Native, is that possible to with it standalone with the plugins ? thank you so much ( it's for a live using)
@NativeInstruments
10 ай бұрын
Hi! The Kontrol S-Series MK3 keyboards are MIDI controllers that require a computer. However, you can connect it to any MIDI device (like a hardware synth) and use the keyboard as a standalone MIDI controller.
@Bezmont
5 ай бұрын
I see no way to use this as a MIDI controller for non NI plugins that use different MIDI input channels. What am I missing?
@babyfacebat727
9 ай бұрын
Just got the S61 Mk3. I have sound but can't see kontact on the led screen. Anyone have any idea? Thanks
@NativeInstruments
9 ай бұрын
Hey, can you please reach out to our dedicated support so we can have a closer look? You can contact us through the form over here 👉 bit.ly/n1kontrol
@DeltaNineProductions
3 ай бұрын
I'm amazed NI is still in business. With all of the known Kompatibility issues and useless 'customer assistance' problems, they don't deserve to survive.
@830jkl
4 ай бұрын
How is everyone feeling about the new screen and the “Yamaha Montage” knob? 🎹
@gilbo9576
4 ай бұрын
Thanks for the video. I can tell that the pedal configuration was a nightmare for me. My two expression pedals were not recognised until I calibrated them in invert (pushing up when asking pushing down)... I don't know why. If someone has the same problem they can try that. But I don't think it's a normal behavior. It should have worked the normal way.
@FRANKMUSIC_1
Ай бұрын
My expression pedal is being recognized, but it’s 5:58 flickering at 0 %. this is not acceptable.🤬
@daviburn
8 ай бұрын
iv done everything right as he shows in the video but when it comes to loading kontact in my daw i cannot use the browser option on the keyboard, its just stuck on DAW mode.. i cant even use it when i open up the stand alone appications.. and like he shows in the video when he doing the DAW configurations, in my abletons input and output i doesnt come up s61 mk3 daw , its comes up saying s61 mk3 port 1 and 2 . A re there any videos on how to sort this problem. i basically cannot use this keyboard untill i i sort the issue
@NativeInstruments
8 ай бұрын
Hi! Can you please get in touch with our support team directly? We'll be happy to help: bit.ly/3tph62a
@mistervid
7 ай бұрын
This is a typical problem when the keyboard is connected directly. The same happened here. After buying an additional power supply and connecting the MK3 via a USB-A hub, everything works as expected.
@KevboKev
10 ай бұрын
I had preordered the day these came out, and now Guitar Center is saying it's backordered. Is that because it's still in Pre-order?
@NativeInstruments
10 ай бұрын
Hi! Please get in touch with Guitar Center directly - they'll be happy to provide more info about your order. 🙏
@KevboKev
10 ай бұрын
Thank you, I did. Apparently other orders were filled prior to mine and they ran out. Supposedly I'm slated to be shipped mine on November 6th. Here's to hoping! Thanks.@@NativeInstruments
@830jkl
3 ай бұрын
I’m a big fan of the NI ionosphere and I’m sure to buy more of their stuff, just not this keyboard. I admittedly get somewhat annoyed when I hear “user feedback” mentioned. Exactly who is “thee” user to which they’re referring? Out of all the comments I’ve read, I haven’t seen even 1 user that said “this is what I’ve been asking for/wanting”, ever. If NI can’t/won’t give us a clue as to how they arrived at these supposed “user feedback requests, then I challenge them to point us to any comment from anyone stating that this is what they’ve asked for. We’ll all be waiting………🎹♥️
@gchitz327
7 ай бұрын
Does play assist work outside of the Komplete Kontrol plugin? I know mk2 scale mode only worked within the Komplete Control plugin, is that still the case?
@NativeInstruments
7 ай бұрын
At the moment Komplete Kontrol software is required to use Play Assist features, but it'll be implemented on device soon so you can bypass the software completely.
@TojiFushiiguro
5 ай бұрын
I would like to know if this update to play assist outside of komplete was coming soon and if you had a date? In addition, did you know when fl studio will be compatible with the keyboard because it will be written soon on your site thx !@@NativeInstruments
@petzme8910
10 ай бұрын
Hello i received my S88 MK3 last day, but i cannot activie my Kontrol S88 MK3 serial number. I tried to create ticket but still waiting for your reply😅
@petzme8910
10 ай бұрын
Now i can active my S88 MK3, but next issue is update firmware for my S88 MK3. First time the updater program error message said that my S88 MK3 cannot go to firmware mode and ask me to restart my S88 MK3 then click retry. I am waiting the updating more 3 min + now, it is still updating … 😂 Should i shut down my S88 MK3 and update again?
@NativeInstruments
10 ай бұрын
That's hard to tell from KZitem. When issuing a support request, please give our system some time to filter the incoming tickets and assign your inquiry to a support agent, who will then review your issue and reach out to you.
@petzme8910
10 ай бұрын
@@NativeInstruments wow i tried to use mac os to update and my S88 updated successfully now. seems windows not work.
@NativeInstruments
10 ай бұрын
Thanks for letting us know!
@jeffreybianca7802
10 ай бұрын
Can you no longer pull loops and one shots out of KK and directly into your DAW???
@NativeInstruments
10 ай бұрын
We're looking into this at the moment. Thanks for your patience. 🙏
@jeffreybianca7802
10 ай бұрын
Thank you
@ottomanbeatsofficial
8 ай бұрын
How is the FL STUDIO integration. There were rumors that it was going to be added in the later months
@NativeInstruments
8 ай бұрын
Working with Image-Line as we speak! We'll add the integration as soon as we can. 🤞
@ottomanbeatsofficial
8 ай бұрын
nice, how is the keybed on the new keyboards? is stiff and clunky where you have to press all the way to get sound like the akai keyboards? im looking for a keybed that does require too much pressing for quarter notes in middle eastern music@@NativeInstruments
@johan_r
10 ай бұрын
Got mine today but I cannot use it because cannot register it. Im getting "An error occurred while processing your serial" when registering the controller. Has somebody else had this issue?
@NativeInstruments
10 ай бұрын
That's hard to tell from KZitem. If you have technical questions or need to report a bug, please reach out to our Product Support: support.native-instruments.com/hc/en-us/sections/360000091538
@petzme8910
10 ай бұрын
Hello I tried update again and again but the updater software still said below error message "Your Kontrol S MK3 failed to boot into firmware update mode and could not be properly updated. To boot your kontrol s mk3 into firmware update mode, please power-cycle it and click retry" Please help to solve this issue. Thank you
@jwilliams986
7 ай бұрын
Hey petzme8910 I just purchased my MK3 today and I got the same error message. How did you resove the issue?
@NativeInstruments
7 ай бұрын
Sorry to hear you had trouble setting up your keyboard. Could you please try following the troubleshooting steps in this article? bit.ly/3MelBCZ
@djobed.utrecht
10 ай бұрын
Ive bought the s88 last sunday. Ive been looking for the manuel and couldn't find it. Finally a vid with more in depth information though this video but where can I find the manuel?!? Also more info about how the DAW integration works would be very very appreciated. But than again, I'm human, maybe its somewhere on the NI website, if so, please tell me where
@djobed.utrecht
10 ай бұрын
The weighted key's are great, the light guide good, the screen very good and the way how it display's all functions also great. But as my formal reaction tells, there is still so much unclear for me
@briankullas6463
10 ай бұрын
The links to the online manual and the DAW shortcut sheet are in the description of the video
@djobed.utrecht
10 ай бұрын
Thank you! I'll use that for sure, but,.. I was looking and couldn't find it, was I looking with my nose or is at least the manual sheet and the 'welcome to kontrol' new? @@briankullas6463
@NativeInstruments
10 ай бұрын
Here's a link to the user manual: bit.ly/46DgF2n
@tucsonaffordablewebllc3690
10 ай бұрын
It says you don’t need a software and the work you did saves to the keyboard. How can i play it without the software while this keyboard is a stand alone meaning their is the audio output?
@NativeInstruments
10 ай бұрын
Hi there, the Kontrol S-Series MK3 doesn't operate fully standalone and still requires a computer to run. The software mentioned in this video is Komplete Kontrol - which you no longer needs to run to take full advantage of the keyboard. You can just fire up Kontakt and use it with the keyboard right away.
@tucsonaffordablewebllc3690
10 ай бұрын
@@NativeInstruments Hi. Ok. I am super interested and will place my order right away if you can just help me with another question. For my use, I just need to edit and render sounds to come to a new sounds that I want. Most will be Strings, Brass, Flutes. That is all what I need. Then, I will have many sounds saved to the keyboard and play it on stage. First, does Kontrol S61 render that? Second, do I still need the computer to output the sound?
@NativeInstruments
10 ай бұрын
You can customize the sounds using the knobs underneath the screen and save the presets. And yes you still need a computer since the keyboard is a MIDI controller and doesn't produce any sound of its own. Hope this clears things up!
@tucsonaffordablewebllc3690
10 ай бұрын
@@NativeInstruments Now it makes sense and I understand the Kontrol Keyboard. It is a piece of cake but unfortunately not my style at all. Maybe if it does have sound output or if it was a stand alone, I was going with it. Maybe in the future. Thanks.
@omnergyproductions
10 ай бұрын
Is there anyway I can play this directly to a speaker that had a MIDI in or an amp with a 1/4 connector (using a midi out to 1/4 conversion cable)? I just want to be able to play this like a normal instrument without running through a laptop. I understand that MIDI output usually only sends strictly MIDI commands; however, since this appears to have local synths installed I was wondering if that noise gets passed through to the MIDI out?
@NativeInstruments
10 ай бұрын
The Kontrol S-Series MK3 requires a laptop. It's a MIDI controller, not a standalone keyboard sorry!
@omnergyproductions
10 ай бұрын
@@NativeInstruments Any chance you guys are coming out with a Stand Alone version?
@NativeInstruments
10 ай бұрын
No plans for that at the moment 🙃
@bay-bjoey8157
4 ай бұрын
Do a video on cubase please
@user-ys8hw3tm9t
8 ай бұрын
I've got this controller, but it refuses to "recognise" half-pedaling dampers? Set it to use one and the pedal doesn't work at all, set it to switch mode and the pedal works?? Bug in the OS?
@NativeInstruments
8 ай бұрын
We'll need to have a closer look at this. Can you please contact our support team directly? You can get in touch with us through the form over here 👉 bit.ly/n1kontrol
@user-ys8hw3tm9t
8 ай бұрын
I already have...all they did was point me to the setting up pedals tute, all of which I have followed to the letter. To give another example, when you go to page two of the pedal MIDI setup, the sustain pedal is set to CC11?? Should be 64, even if it is half-pedaling. anyhoo if you contact the NI team I am sure they can share my emails. @@NativeInstruments
@NativeInstruments
8 ай бұрын
If the problem persists, you're welcome to get back to our support team by email 🙏
@user-ys8hw3tm9t
8 ай бұрын
Done already all I get is to try the steps on the webpage. It is a bug in the firmware!@@NativeInstruments
Пікірлер: 269