Ì was in the middle of performing open heart surgery but then I heard the new Latent Vision video dropped. Patient will have to wait.
@latentvision
4 ай бұрын
even better invite the patient over
@AndyHTu
4 ай бұрын
lol its worth it. The heart has to come after.
@context_eidolon_music
4 ай бұрын
I was watching Latent Vision when the new Latent Vision dropped. I obviously died.
@latentvision
4 ай бұрын
@@context_eidolon_music 🤣
@jordibasss
3 ай бұрын
You can always create better face for the patient 😂
@TheDocPixel
4 ай бұрын
Matt3o... you're an absolute gem of a teacher, developer, and entertainer as well! Your casual humor really makes this mountain of info so much easier to climb! Thank you so very much, and wishing you joy in everything you do!
@tartwinkler1711
4 ай бұрын
Thank you for explaining how this works. This type of information is very useful when delivered by someone that is also a great teacher.
@davidb8057
4 ай бұрын
Fantastic job, Matteo. The amount of knowledge you're sharing in your videos is always amazing.
@unsivilaudio
4 ай бұрын
"It will hurt your feelings" 😂 happens to me alot when I thought I got a good likeness
@starzilla2975
4 ай бұрын
FANTASTIC! Just what the doctor ordered! These align nodes will be very nice to play with too! This may be a long shot with the current technology, but I am hoping at some point I can find a way to get my faces to take a reference expression and copy that expression to another face or just straight up better control expressions in some way. unfortunately, right now, stable diffusion doesn't seem very flexible with expressions and it changes the face a lot so this will be helpful to help me constrain the face to be the same person. With lukc, there may be a way though so I am gunning for it.
@latentvision
4 ай бұрын
it's possible to change expression but it only works with extremes (very angry, very happy... or neutral)... we miss everything in between
@starzilla2975
3 ай бұрын
@@latentvision You should consider looking at a new paper that came out this week titled "Face Adapter for Pre-Trained Diffusion Models with Fine-Grained ID and Attribute Control", it published with code and a huggingface model. It does exactly what I hoped, takes a reference image and copies the expression to your target face, it isn't perfect but it is definitely an improvement and the best I have seen so far for Stable Diffusion. Unfortuantely I think it only works for SD 1.5 but they have a demo and I did a bunch of test faces on it and it is pretty great. I don't know how related it is to IP-Adapter, but considering your stint on face analysis and swapping, I figured I would comment on here and let you know in case you missed it because I think it is something you would be interested in.
@starzilla2975
3 ай бұрын
@@latentvision In case you missed it, I definitely think you should take a look at the paper with it's associated hugging face model and githubio titled "Face Adapter for Pre-Trained Diffusion Models with Fine-Grained ID and Attribute Control". It came out right before this video and it's exacty what I hoped, even if it only works with sd15
@YING180
3 ай бұрын
You are the real master and you are so generous to share those techniques. Thank you so much.
@Firespark81
4 ай бұрын
Thank you for making this. It was very helpful.
@2PeteShakur
4 ай бұрын
brilliant and fresh as ever, keep up the great work matteo! ;)
@leolis78
4 ай бұрын
Mateo your work is excellent! you always surprise all of us with your progress! The workflow you show in the video is uploaded somewhere? Thanks a lot!!!
@latentvision
4 ай бұрын
it's in the discord but... I pasted it here too pastebin.com/4tYRceiK
@leolis78
4 ай бұрын
@@latentvision thanks so much!!!! 😃
@d4n87
4 ай бұрын
Grande Matteo 😁👍 anche per le spiegazioni tecniche dettagliate su queste cose difficili spesso da comprendere
@lhovav
4 ай бұрын
Thanks!
@kalicromatico
4 ай бұрын
Woowwww!!! this video is a masterclass
@mehradbayat9665
4 ай бұрын
...that last picture 🤣
@sergetheijspartner2005
4 ай бұрын
Do you know that meme where someone is in mathclass and the professor writes 1 + 1 = 2 and he thinks it is easy and then he is distracted for a second and the board is full with the most complex formulaes? That is what your videos feel like, luckily you can pause this and return if you missed something😂
@latentvision
4 ай бұрын
don't worry... happens to me all the times
@tbolton9247
4 ай бұрын
Love your videos and tutorials....best out there and I learn a lot
@weirdscix
4 ай бұрын
Another excellent video, thank you
@gnsdgabriel
4 ай бұрын
Thank you 🙏
@adriantang5811
4 ай бұрын
Thank you Teacher!
@marshy..
3 ай бұрын
Now I just need a faster GPU... Excellent video - thank you.
@michail_777
4 ай бұрын
Hi, Mateo. I understand you are the one creating the nodes for the IPAdapter. There is a node IPAdapter Encoder, it has a mask. I tried to connect the image and image as a mask, but did not understand what it is for. If possible, please tell me how to apply this mask correctly in this particular node. Thank you again.
@lucagenovese7207
2 ай бұрын
Maestro... grazie!!
@KINGLIFERISM
4 ай бұрын
Just waiting for this to be as good as photomaker.
@Homopolitan_ai
4 ай бұрын
Top 👍
@banzai316
4 ай бұрын
Very useful
@mattm7319
4 ай бұрын
face align could be really funny to work with ^^ :D
@contrarian8870
4 ай бұрын
Can you explain the concept of "embeddings" in general? What function do they serve? What do these numbers represent?
@riccardobiagi7595
4 ай бұрын
Great video as always! a question.. Where do I find the "Face segmentation" node? I don't have it and If it's a custom node to install I'm not finding it :( Thank you
@no-handles
4 ай бұрын
update then refresh, you will see it when you search for faceseg..
@JoeyD786
2 ай бұрын
Does anyone know how I can get the value and dist data shown in the image preview?
@kytbaba67
3 ай бұрын
Is it possible to make caricature image with similar workflow?
@giusparsifal
4 ай бұрын
Hello and thanks, I am on your discord on workflow section but I can't find how to download it...
@IOVART
4 ай бұрын
Error occurred when executing FaceAnalysisModels: Can you tell me what's wrong? Error occurred when executing IPAdapterUnifiedLoaderFaceID: IPAdapter model not found.
@runebinder
4 ай бұрын
Downloaded the workflow but getting this error on the FaceEmbedDistance node, any ideas? I've tried to pictures of the same person that were taken on the same shoot and look very similar. "Error occurred when executing FaceEmbedDistance: setting an array element with a sequence. The requested array has an inhomogeneous shape after 1 dimensions. The detected shape was (4,) + inhomogeneous part."
@bwheldale
4 ай бұрын
Me too
@bwheldale
4 ай бұрын
MIne is working now with the latest update of Face Analysis
@runebinder
4 ай бұрын
@@bwheldale I reinstalled Windows over the weekend (File Explorer has been playing up and been putting it off for ages), working fine for me after setting Comfy back up . Would have installed the updated version you mentioned.
@eucharistenjoyer
Ай бұрын
Thanks for the video Matteo! But doesn't FaceID load insightface already by default? Why use dlib then?
@latentvision
Ай бұрын
not all face models require insightface
@eucharistenjoyer
Ай бұрын
@@latentvision Thank you, that's what I imagined. It's just my bias and the fact that FaceId is so good that I end up using it in almost all the images I do haha.
@jomiller7332
4 ай бұрын
trouble changing within the node "face Analysis Models" from insightface library to Dlib library, (I did make a Dlib folder within Comfyui Models )
@anandwadodkar
4 ай бұрын
I am stuck too
@HiProfileAI
4 ай бұрын
I got that working but only with insight face. How do we install Dlib?
@bwheldale
4 ай бұрын
If you only got as far as including the models (as I had) it still has more to do. This is how I got it working with portable windows Go to the provided link for "Face Analysis for ComfyUI" Installation Section: For DLIB download (4 models) Check which 'python_embedded' python --version in ComfyUI portable (mine was 3116) Download the Precompiled Dlib (for Windows e.g., 311) (into ComfyUI portable root folder) run the command python -m pip install 'the exact spelling of the downloaded wheel file' UPDATE: Well this does get the dlib into the dropdown, but I celebrated too soon: Error occurred when executing FaceEmbedDistance: setting an array element with a sequence. The requested array has an inhomogeneous shape after 1 dimensions. The detected shape was (4,) + inhomogeneous part. Sorry, if someone else can help both of us that would be appreciated!
@HiProfileAI
4 ай бұрын
@@bwheldale I always have problems with the pip well install stuff I'll try to figure it out and then give an update on how to do it.
@bwheldale
4 ай бұрын
I can verify the Dlib was installed succesfully, the other issue was something else and has been resolved with the latest update.
@thevoid6756
4 ай бұрын
just fyi "likeliness" is a probability. "likeness" describes similarity.
@dfriis
Ай бұрын
As far as I understand, Insight Face is for non-commercial use - what are alternatives?
@latentvision
Ай бұрын
depends what you want to do. for face analysis you can use dlib
@dfriis
Ай бұрын
@@latentvision Thanks for the reply and thanks for the amazing videos! You are an excellent communicator! For doing "face transfer", is InsightFace the only option?
@GES1985
3 ай бұрын
Is there a node or workflow that takes 2 images of the same ai person and generates an image that represents the halfway point between the two? Idea being to make frames for video / gif
@latentvision
3 ай бұрын
you may need a controlnet of the face turning
@GES1985
3 ай бұрын
@latentvision does control net have head position points for faces that are turned beyond 90 degrees (like back of head/hair for turning around)
@adityaghalibhendryan4211
4 ай бұрын
Can FaceID node use dlib too instead insightface so we have free commercial option for FaceID IPAdapter?
@latentvision
4 ай бұрын
unfortunately not at the moment
@fayezhang6085
3 ай бұрын
Which node in maneger is “Face Warp", or github address? I can't find it.
@latentvision
3 ай бұрын
it's in the face analysis extension. You probably need to upgrade it if you have it already
@AnNguyen-pd2xi
2 ай бұрын
Hello Latent Vision! What's the best method to get the most similar and realisic face? Using nodes as Controlnet, PulID or training LORA for this face?
@latentvision
2 ай бұрын
depends on the source material and the kind of image you want to generate (eg: can the colors and pose be the same as the original?).
@AnNguyen-pd2xi
2 ай бұрын
@@latentvision I'm focusing on similarity. When I try to generate images of babies in cute scenes and costumes, I realize that maintaining facial similarity is harder with babies than with adults. My idea is to incorporate scenes and costumes in Lora to create the style I want and then use your PulID workflow to achieve the best facial results. My goal is to get the realistic face details combine with my desired photography style.
@melihdalar6610
4 ай бұрын
😍
@lijiang-g2s
4 ай бұрын
Great, I have a request, now facial analysis can only process one person's image, I think three people together, analysis of the face may produce three different images,Not in the same picture
@ismgroov4094
4 ай бұрын
Thx sir q
@clavarx11
3 ай бұрын
Why not use face alignment by default in all ipadapter nodes? This node is awesome but should be a default thing in ipadapter.
@latentvision
3 ай бұрын
we can't foresee all scenarios, up to the user to pick the best workflow for their needs
@sharpwater2
4 ай бұрын
Great video! Anyone know where I can find the 'Image Random Transform' node?
@latentvision
4 ай бұрын
ComfyUI Essentials, link in the description
@rambapat588
4 ай бұрын
I tried to install instant id and face id from comfy ui manager but is shows import fail error, could it be because of my low vram, cuz I have only 4gb vram or could there be any other reason?
@latentvision
4 ай бұрын
4GB won't be enough for InstandID but it could work with SD1.5 models and faceID. check the repository for installation instructions
@AI.Absurdity
4 ай бұрын
🖖
@Thank_you_USA
4 ай бұрын
ty where is the workflow?
@voxtyz
4 ай бұрын
can you share the workflow?
@sirmeon1231
4 ай бұрын
My Manager says dlib is installed, but i can't select it :/ The things you can do with it are pretty awesome!
@latentvision
4 ай бұрын
check the repository, you'll find installation instructions
@rinpsantos
4 ай бұрын
@@latentvision The same for me... I installed the dlib models into dlib directory and installed dlib library too. However, I can´t select dlib (only insightface).
@rinpsantos
4 ай бұрын
Well, I installed the dlib library using the ConfyUI portable environment and, now, I can choose dlib.
@latentvision
4 ай бұрын
@@rinpsantos please check the discord for help or the official repository
@raysun5889
4 ай бұрын
@@rinpsantos Hey man, can you elaborate on that, I was hoping to find a "venv" for virtual environment but I can't..., please help, thanks a lot!
Пікірлер: 98