Thx for this video. I'm looking at this sprayer to paint my deck. We have a handful of projects to get done quickly so we can get the house on the market.. and it would literally take a week to hand paint my deck.
@creativegrain7699
3 жыл бұрын
Hey there! I think this unit would work well for spraying a deck and other house projects. I havnt used it for decks or fences though, only for spraying my shed and touch up spraying on our ext. of the house.
@OscarMartinez-ss9zi
4 жыл бұрын
Awesome video Nate, very helpful
@creativegrain7699
4 жыл бұрын
Thanks Oscar! I know there is room for improvement on future videos, but this was fun to do.
@aceimportacion
12 күн бұрын
My Graco Truecoat VSP 360 sprayer, when working, seems to spit or throw a jet apart from the paint fan, does anyone know what is causing this or if any part is damaged?
@nobreighner
5 ай бұрын
Does the variable speed actually change the rotation speed of the motor? Or is is really a pressure adjustment? Thanks!
@patrickursomanno8861
4 ай бұрын
Would you recomend this for spraying a ceiling or would it create a overspray mess ?
@renostubbs8504
2 жыл бұрын
Awesome video bro, have you ever used it on walls or larger surfaces?
@garywahle581
3 жыл бұрын
Thanks Nate
@manuelsantos8213
Жыл бұрын
Great video
@salocin911
3 жыл бұрын
Gave you a thumbs up for the great review! How do you make a kickstand... do you just brush the spot when done?
@creativegrain7699
3 жыл бұрын
Thanks for the support! The kickstand is no more than 3/4"x2" and I measure so I put it right where my hinges go. That way when I drill out the hole for recessed hinges they then cover where the wood kickstand was. It actually works pretty well.
@HandBananaE1337
6 ай бұрын
Did you get any tiger stripes in your spray pattern
@bludika
2 жыл бұрын
How’s the overspray on this?
@monicaclarindo3373
2 жыл бұрын
Thanks
@_serg10_
2 жыл бұрын
What is the best tip to use so the paint can come out good do you know?
@jamesburroughs7248
3 жыл бұрын
Great video sir I just hope I can clean the darn thing but this I need kinda tired of Wagner to much cleaning but this I am willing to try hope it handles Thompson water seal for staining decks and fences.
@creativegrain7699
3 жыл бұрын
It cleans very easily and quick.
@jamesburroughs7248
3 жыл бұрын
@@creativegrain7699 so do you have to prime it every time it gets empty?
@creativegrain7699
3 жыл бұрын
@@jamesburroughs7248 Yeah you do, always have to evacuate the air from the hopper.
@findingxeno3285
3 жыл бұрын
Can’t airless spray Thompson water seal
@creativegrain7699
3 жыл бұрын
@@findingxeno3285 Yeah it should be able to, I've never sprayed any clear finish with this sprayer though. I typically use another sprayer for that.
@Jayy_.-
3 жыл бұрын
Mine doesn’t work. It throws nothing out. I opened it up cleaned it and still nothing. I tried using water to see if water would pass through and nothing.
@rayjones5157
2 жыл бұрын
Did you ever fix it?
@Jayy_.-
2 жыл бұрын
@@rayjones5157 no. I’d suggest staying away
@ricardorodriguez4353
Жыл бұрын
Maybe your doing something wrong mine didn’t work for a bit I had to prime it for a bit and clean tip
@swift4311
3 жыл бұрын
I have turncoat 360 any tip recommendation for cabenit spray
@adsonjose4628
3 жыл бұрын
Hey, how's it going? I'm from Brazil, I don't understand English. I'm using the translator. I wonder. what types of paints can i use in it?
@creativegrain7699
3 жыл бұрын
You can use any paint you want. I stick to water based paint since it's easy to clean up. Most paint needs thinned a little in order for the gun to apply evenly.
@tristanluc7008
3 жыл бұрын
isnt 8 too high? will paint run when you spray that close?
@creativegrain7699
3 жыл бұрын
I gotta go sorta fast. I keep it that high because I don't like thinning my paint and the fanning on the spray pattern is pretty bad at a lower number which requires more coats.
@robertoferrari5397
2 жыл бұрын
..does the finish come out smooth?
@dannyvillegas5969
Жыл бұрын
Can i use it with oil paint? Do i have to dilute it with thiner . ?
@ricardorodriguez4353
Жыл бұрын
Yes you can but not any flammable oil paint and yes paint thinner.
@michaelflint4159
3 жыл бұрын
Hi Nat. Did you alter the viscosity of the product?
@creativegrain7699
3 жыл бұрын
I didn’t thin down, but would help on heavier paints.
@Justmyopinion_305
2 жыл бұрын
I'm thinking about getting the battery pack one to paint a house
@theghostofteddyperkins3687
3 жыл бұрын
Thanks for the video! Do you think this sprayer would be suitable to use for paintings interior walls? I am currently redoing my house, and also have 2 rental units. Would love something to cut down my time and also the dreaded roller and paint brush cleaning job.
@enriquemejia5861
3 жыл бұрын
Nah these hand held are good for maybe one wall It's annoying having to refill , this is perfect for cabinets and doors . For walls I have the X5 model and I love that thing
@enriquemejia5861
3 жыл бұрын
Also cleaning is kinda messy but it's not the worst thing in the world
@supremeservices3575
2 жыл бұрын
I just used it in an interior painting job I finished 2 rooms in like 30 minutes All white satin finish ceiling and walls I was shocked it worked fine No issues whatsoever no lines And frankly I'm good at painting in general but it's the first I use it and it works great for me
@fairamir1
3 жыл бұрын
Where did you get the orange paint pourers ?
@creativegrain7699
3 жыл бұрын
I think I got mine at Home Depot or Lowes, they both sell them. I'm sure a local Ace Hardware or similar store has them too. I just checked and Amazon has them too. It's so handy! One of the best cheap items in the shop.
@fairamir1
3 жыл бұрын
@@creativegrain7699 Thanks I usually use those red plastic can covers which work just fine also
@Ricebow11
3 жыл бұрын
I see on Home Depot there is a DSP Model vs the VSP? Is there any big differences?
@stephenstrader1577
2 жыл бұрын
DSP (Dual Speed) has 32oz paint cups and Hi-Low pressure, VSP (Variable Speed) has 42oz paint cups and a 1-10 dial for 1-10 pressure settings for fine-tuned painting based on the project and type of product you’re spraying.
@commandersi
3 жыл бұрын
How do you tell that the coat of paint is thick enough?
@creativegrain7699
3 жыл бұрын
I always spray 2-3 thin coats minimum. You don't want to do 1 or 2 thick coats, it wont dry well and will look too heavy. Once you notice the paint is covering an even layer on the material (not necessarily thick) then it's enough. For my cabinets and painted furniture, I do two prime coats and 2-3 final coats.
@davidsteinfeld9123
Жыл бұрын
something I found with it was you can squeeze out the air the gun it's self don't need to be running however to purge it it will need to run a few seconds is all the liner can be reused lots of times as I have found out from experiences there are times were it may leak sine air and the gun will shut down on its own till it's purged n😅ce tool a bit pricey I to got mine at the home Depot the one I had before was a Wagner I will not buy another the ting lasted one season of house hold painting of odds and ends and blew out no bueno if you buy cheap it just may be cheap so far so good for the cracko I see this company don't only make sprayers baby things to pretty Kool there reputation for great car seats and strollers is top notch so why not there sprayers well I will say it honestly time will tell it it's around more then a year then it's money well spent sure hope it's around a lot longer I like it to much
@tommetivier
3 жыл бұрын
It pulses so leaves pulse lines ridiculously bad and I paid 300 it’s going back
@creativegrain7699
3 жыл бұрын
Yeah mine does too, I've tried all sorts of things. Now, I only use it for outside projects like fence stain, or painting a shed even then it take multiple coats. I never use it anymore for furniture.
@billcondie1088
3 жыл бұрын
@@creativegrain7699 so you don't recommend it....
@creativegrain7699
3 жыл бұрын
@@billcondie1088 Not for furniture or cabinets. It works good for painting walls, a shed or things like that.
@macarmo7286
3 жыл бұрын
Im using this gone for the cabinets and right now with a first coat it looks perfectly smooth. But I’ve tested and to have that perfection I’m on speed 1. If you using higher speeds than that happens.
@macarmo7286
3 жыл бұрын
I just confirmed 2 layer if not perfectly painted you can see the lines
@ChandaurRoshini
3 жыл бұрын
Did you get drips in the paint?
@creativegrain7699
3 жыл бұрын
It will but you just need to keep the trigger pulled until you pass the material other wise it does drip sometimes.
@ChandaurRoshini
3 жыл бұрын
@@creativegrain7699 sorry, I wasn’t clear. I mean, when I use this to paint my cabinets, paint drips form on the cabinet and slips down.
@user-eu9ui4we4p
2 жыл бұрын
👍🏻💯
@tedmcdonald3377
2 жыл бұрын
😎🛠️😎🛠️😎
@danny12344
Жыл бұрын
All not work get air gun
@compaspromos2194
3 жыл бұрын
This thing doesn’t work. It only works once. I forgot to clean then I went to clean. Still doesn’t work. I come here for help.
@mr.mediocre1271
4 ай бұрын
Well it sounds like it would have worked plenty more than once. User error ruined it and make it only work once.
Пікірлер: 67