Thanks! Hi Angie. Every time I need to know ANYTHING about using my Cricut, I head to your channel. Everything is so well explained and demonstrated. PLEASE keep up the great work. Thank you
@AngieHolden
Жыл бұрын
Thank you so much!
@rosemarietruppa9844
2 жыл бұрын
Thank you - I was just about to start a project today and would have never thought you can apply on painted wood. Thank you.
@AngieHolden
2 жыл бұрын
Glad I could help!
@janetparker7841
2 жыл бұрын
Thank you for the great video, I am just going to make a sign with HTV and now I know how to do it. I have learnt so much from your videos covering vinyl and also sublimination.
@AngieHolden
2 жыл бұрын
Glad it was helpful!
@cyndimccorkell5804
8 ай бұрын
thank you , you explain everything so clearly !
@crystalmanso6042
2 жыл бұрын
THANK YOU SOO MUCH FOR THIS VIDEO!!! I hate using permeant vinyl on wood it comes off during Florida humidity. With the heat transfer vinyl it doesn't!!! SOO THANK YOU AGAIN 😁😍😍😍♥️♥️♥️🙌🙌👏👏👏
@AngieHolden
2 жыл бұрын
Yay! Happy to help!
@marynellessen8790
27 күн бұрын
Thank you!!
@peggyblakeslee6727
2 жыл бұрын
Love it. Surprised iron on worked. I would have thought permanent vinyl .
@deborahdececca605
2 жыл бұрын
Thank you Angie I will be doing this today.
@AngieHolden
2 жыл бұрын
Hope you like it!
@jenniferdunn1272
2 жыл бұрын
Awesome project! Using this to display a vinyl cut made from a picture of my dad
@elainelee8374
3 жыл бұрын
You are just talented! enough said...
@dthomascful
18 күн бұрын
Since 2 years ago, have you attempted to put a varnish on top of the completed htv wood work?
@AngieHolden
10 күн бұрын
I have before. You can use a clear finish on top.
@katalynasexton933
2 жыл бұрын
Good to know you can do this on painted wood. I have a clock that I used with acrylic paints, and I have a quote that is going on it. So after I use the heat press, can I also use a sealer/varnish afterwards?
@AngieHolden
2 жыл бұрын
Yes you can!
@delana9398
Жыл бұрын
@@AngieHolden Thank you so much for this amazing video ❤ Once I get my heat press vinyl on the wood can I use Mod Podge clear glossy sealer spray over it ????
@huttonbaby1
5 ай бұрын
So cool 😎
@Texasdj201
Жыл бұрын
This is a great idea but just not for all types of wood it won’t stick on rough stock it has to be baby bottom smooth
@SCGNiagara101
4 жыл бұрын
Interesting. I put regular permanent vinyl on wood all the time but never thought to use heat or even HTV.
@AngieHolden
4 жыл бұрын
You should try it!
@AlexisCarterNotaryMentor
4 жыл бұрын
That’s why I’m watching to find out if I can use the permanent bond vinyl, thank you
@cyndimccorkell5804
8 ай бұрын
So I used waxpaper to cover transfer, the transfer paper melted, too hot?? Does it mattter the type of transfer paper used ? I got mine at the dollar store. Maybe it can't be heated ? Thanks
@AngieHolden
8 ай бұрын
Correct. You need a heat transfer mask for this type of vinyl. Most brands come with one attached already.
@hj_muaheatherjane8795
2 жыл бұрын
Newby cricut user here! Got the express air 2 for Christmas! Got start building my cricut tools and materials arsenal haha! In the mean time can I use an iron for all your projects you have shown on your channel?
@AngieHolden
2 жыл бұрын
Yes you can use an iron for HTV! It is a bit of a learning curve so maybe start with a small project and using it on fabric.
@daveymichael6891
Жыл бұрын
Does some wood let off any toxic fumes? I would like to press a transfer on Poplar wood at 190 degrees but not sure if this wood is treated with anything that might let off dangerous fumes under a press
@AngieHolden
Жыл бұрын
I don't think plain wood would release fumes. If you are using some sort of treated wood, you might want to be cautious.
@jeannekozuszek4666
4 жыл бұрын
Love it. Love your videos. Merry Christmas
@AngieHolden
4 жыл бұрын
Have a fabulous holiday!
@almaandrews9531
2 жыл бұрын
Hi Angie.. I made a wood sign today using HTV . I used a pine board. I prepared it by first putting polyurethane on the knots, then I primed, then painted it.. I used my large heat press ( the only one I have) at 300 degrees for 40 seconds. The vinyl did adhere well but the pine gum (sap) leaked through. Is there any way to prevent this from happening in the future and is there a way I can salvage the sign I did make. p.s. hand sanitizer removed the paint.Thank you for your help..Alma
@AngieHolden
2 жыл бұрын
I use a low temp/time HTV to prevent this. I have BFlex HTV which is like 285 for just 4 seconds.
@almaandrews9531
2 жыл бұрын
@@AngieHolden ok thank you . I will try another one using your method. Thank you so much for getting back to me, I really appreciate it..
@kimberlyflores5968
Жыл бұрын
my HTV melted and didn't stick to the wood, I stain and coat the wood prior and let it dry for 24 hours each time; what I observed from your technique is you put a butcher paper/parchment, that I didn't do, is that the reason mine melted do you think? I used the right setting from cricut heat guide.. I used everyday iron on, any suggestions? Thank you!
@AngieHolden
Жыл бұрын
Sounds like a heating issue. I usually use an HTV with a low time/temperature requirement as it is a bit easier. But everyday iron on will work!
@kimberlyflores5968
Жыл бұрын
@@AngieHolden thank you for your reply I will try it then
@diyretiredmom
2 жыл бұрын
Have you ever tried applying the HTV to stained wood? Also I was wondering do you ever put modge podge or polyacrylic over it to seal it?
@AngieHolden
2 жыл бұрын
I have put it on stained wood without issue. You can definitely seal over the top as well!
@diyretiredmom
2 жыл бұрын
@@AngieHolden ok thank you
@mfd717
Жыл бұрын
@AngieHolden what do you seal it with?
@TaraGraham-re2xn
Жыл бұрын
we are doing coasters for my daughters wedding . would it be smart to clear coat the coasters after the heat pressing or is the heat pressing enough ?
@AngieHolden
Жыл бұрын
I would do something over them.
@liaananita
6 ай бұрын
Is it possible to use mini heat press on cartoon boxes?
@AngieHolden
6 ай бұрын
Maybe? I haven't tried it.
@smeg8557
7 ай бұрын
HI was wondering if you can help me? I tried using HTV on a wood sign but when I removed the backing it left little yellow marks on the wood, any idea why this would happen? Thank You!!
@AngieHolden
7 ай бұрын
Probably the sap or something coming out of the wood.
@smeg8557
7 ай бұрын
@@AngieHolden I painted it, but that makes sense
@AngieHolden
7 ай бұрын
I have found that some wood the sap will come through paint with heat.
@smeg8557
7 ай бұрын
Thank You!! I think I might have had it too high :)@@AngieHolden
@MirfatnHamza
2 жыл бұрын
Hi. Ive used HTV on a chopping board, its left a sticky residue and a mark around where the htv vinyl was placed. what am i doing wrong?? thanks
@AngieHolden
2 жыл бұрын
More than likely you need to let it cool before peeling back the carrier sheet.
@MirfatnHamza
2 жыл бұрын
@@AngieHolden ok i’ll try that. Thanks.
@mikeledee8786
Жыл бұрын
When I use my heat press it causes the wood to warp a little but after a while it lays flat, is this normal? If not what is the best fix? Thanks
@AngieHolden
Жыл бұрын
Yes that definitely does happen especially for thinner pieces. I sometimes allow to cool while weighted down.
@mandycane0909
2 жыл бұрын
So I’m guessing you still need to mirror the image? Just like you would with a shirt?
@AngieHolden
2 жыл бұрын
Yes you do.
@yasminalkhal8081
3 жыл бұрын
Very helpful I’m very new to this and trying to do my new small business , and stuck with the wood prints on ! So heat transfer vinyl can I add over it gold foil ?
@AngieHolden
3 жыл бұрын
I have never tried that. Sorry!
@Craftybowladychannel
2 жыл бұрын
Can I use Oracel 651 and use contact strong grip to pick up the design?
@AngieHolden
2 жыл бұрын
That would not be HTV. That is adhesive.
@nuevodianuevocomienzocorte4982
3 жыл бұрын
Love it 😍
@frobbsy27
2 жыл бұрын
What about on wood cutting boards from the dollar store? Wanting to make Santa cookie trays to sell for Xmas. Do I need to coat it?Can I use a home iron? Not getting my Easy Press til Xmas😉😁 Thanx so much. Love ur vids!!
@AngieHolden
2 жыл бұрын
I haven't actually tried HTV on wood with an iron so I am not positive. I generally don't add HTV to anything food will touch but Santa cookie trays really don't get the foot on the HTV so maybe that works? You could add it then go over the entire thing with a food grade sealer like Shellac.
@tinalee9863
2 жыл бұрын
Could you use printable HTV on wood? Would there be any differences? Thank you.
@AngieHolden
2 жыл бұрын
You can but the wood would not show through.
@bmrs.g7108
Жыл бұрын
Thanks for this tutorial. What font did you use?
@AngieHolden
Жыл бұрын
This was a handmade SVG file.
@marholala4845
4 жыл бұрын
Thanks 🙏🏼 Angie..!! Merry Christmas 🎄🎁
@johnl805
3 жыл бұрын
How on earth do you just pull it off when weeding such a wispy design? I always have to do surgery just to keep everything in place and I usually still end up ruining something. What kind of vinyl is that? I’ve tried siser and cricut htv
@AngieHolden
3 жыл бұрын
This is Cricut HTV. Mine usually cuts like this though.
@johnl805
3 жыл бұрын
@@AngieHolden hmm ok. I think it might be my blade. It hasn’t done much but it has always struggled with small lettering and details. Hell it’s even making bigger letters look sloppy. I think it’s a fine tip blade. Is there a different blade I could use?
@AngieHolden
3 жыл бұрын
Maybe just try getting a replacement blade. That one may be damaged or dull!
@sandeebond4514
2 жыл бұрын
Is the wood ''varnished" or ''naturally raw"? Nice project. I learn sooooo much from your videos. Thank You.
@AngieHolden
2 жыл бұрын
This was probably varnished as I purchased it finished.
@Autumnleaves83
2 жыл бұрын
I think it only works on painted wood not raw
@robosborne722
3 жыл бұрын
Hi I am new to cricut and would like to know if this can be ironed onto stain pine wood and I would like to apply a gloss clear spray poly. Can this be done?
@AngieHolden
3 жыл бұрын
Yes that should work!
@rosamata3694
2 жыл бұрын
Awesome! Have you worked with foil on wood? 😮
@AngieHolden
2 жыл бұрын
I have not.
@feliciaallen2568
3 жыл бұрын
I did heat transfer on painted woodround but the paint lifted... Did i heat it too long???
@cathyaustin1944
Жыл бұрын
How to seal finish sign
@AngieHolden
Жыл бұрын
I don't seal for indoor use. Outdoor - I use a few coats of polycrylic over the entire thing.
@MariaUrrutia-ow2wx
Жыл бұрын
Can you add iron on vinyl to sequence fabric?
@AngieHolden
Жыл бұрын
I would not.
@janetmenchyk9778
9 ай бұрын
How about iron and vinyl, what’s my options
@AngieHolden
8 ай бұрын
HTV and Iron on vinyl are the same thing.
@sandraverrell4509
4 жыл бұрын
Was your wood treated with a clear coat or anything prior to applying the vinyl.
@AngieHolden
4 жыл бұрын
I have done it both ways. On raw and with a clear coat. Both work fine.
@giovaandino22
4 жыл бұрын
@@AngieHolden by clear coat you mean mod pog or what? Thanks in advance
@commentbeast3985
3 жыл бұрын
New subscriber here with a quick question, can the wood be spray painted, if so are there specific paints to stay away from?
@AngieHolden
3 жыл бұрын
You can paint the wood. The main thing I would say is that people do not let the paint cure long enough. For spray paint, I would wait 72 hours before applying anything on top. Then use the minimum temperature and time that you can get away with.
@ericaramos198
Жыл бұрын
Do you put some type of sealer on top of it???
@AngieHolden
Жыл бұрын
I only do if it is going outside.
@shanikagranville7522
3 жыл бұрын
How do you get the sticky lining residue away after pressing? I only have the issue when putting on wood not clothing.
@AngieHolden
3 жыл бұрын
Hmmm. I don't remember having that issue. Maybe the brand you are using bonds with the wood?
@marylombardo6172
3 жыл бұрын
Having the same issue with multiple brands
@alicemincks9645
3 жыл бұрын
Wish I had watched your video before I attempted my project.should the wood have a coat of poly on it before you do the HTV? Is there a specific brand of vinyl that can be used. Thanks gain for making these video for rookies like myself.
@AngieHolden
3 жыл бұрын
I would coat it or dry it out. You just don't want to pull the sap out with the heat. Any HTV should work. The ones with a shorter press time do work a bit better.
@jenniferdunn1272
2 жыл бұрын
So would a wood slice purchased from michaels (like Angie used ) be dry enough that I wouldn’t need to add modge podge prior to adding htv? I wondered if the heat does anything to the modge podge?
@ACB2K
3 жыл бұрын
Should the sign be sealed with Polyurathane?
@AngieHolden
3 жыл бұрын
I usually don't as this will be inside and is for my personal use. I would if I was using outdoors. If you are selling these. you might also want to seal over the top.
@buddysmith7080
3 жыл бұрын
Do you need to clear coat this after the vinyl is pressed?
@AngieHolden
3 жыл бұрын
You don't have to especially if it is going to be used indoors.
@gembets
3 жыл бұрын
Can I do this on a wooden serving board ? How would I seal it
@AngieHolden
3 жыл бұрын
If you are going to do it where it touches food, I would do epoxy over the top that is food safe.
@camillareyes1610
Жыл бұрын
I like the font What’s it called ?
@AngieHolden
Жыл бұрын
It was a pre-made SVG file.
@solodreamy
4 жыл бұрын
have you used the siser htv metal on stained wood? i keep getting this gooey residue after i transfer and i dont know if im removing the clear backing too early or if im doing something else wrong :(
@AngieHolden
4 жыл бұрын
Is it the sap coming out of the wood? I have that issue sometimes. I would heat it for less time and see if it still will stick and not have the residue. I think that is dependent on the wood and how dry it is more than the brand of HTV.
@MOANAMEMORIES
4 жыл бұрын
What can you use to heat if don’t have cricut heat press
@AngieHolden
4 жыл бұрын
Try using an iron!
@claybrookfamily
2 жыл бұрын
Do I need to prep the wood at all?
@AngieHolden
2 жыл бұрын
I mean if you want to stain or paint it, then yes you would do that.
@alexu7647
4 жыл бұрын
Could you do this with a heat press?
@AngieHolden
4 жыл бұрын
I would say that you definitely could!
@yaohkhazakaybathtsayon3822
3 жыл бұрын
What brand of HTV vinyl did you use?
@AngieHolden
3 жыл бұрын
I used the Cricut brand.
@madelyn99
3 жыл бұрын
Will the clear coat I put on my wood affect the htv?
@AngieHolden
3 жыл бұрын
I have done this one clear coated wood and raw wood. I think you will be fine.
@sharonyazdi3568
3 жыл бұрын
Where you recommend to but wood block that can be used with heat press ?
@AngieHolden
3 жыл бұрын
I usually get my blanks at my local craft store.
@sharonyazdi3568
3 жыл бұрын
@@AngieHolden it’s regular blank or I need sublimation blank?
@AngieHolden
3 жыл бұрын
When you are using HTV, just regular wood works! No need for sublimation unless you are using sublimation ink or Infusible Ink.
@TheNegotiator112002
2 жыл бұрын
Do you mirror the image to cut for application?
@AngieHolden
2 жыл бұрын
Yes you do.
@mariannecorman
Жыл бұрын
Unless patterned HTV correct?
@danamoodyyoung8003
3 жыл бұрын
Would you recommend vinyl or htv for outdoor wood signs?
@AngieHolden
3 жыл бұрын
Either one. But with both for outdoor I would put a sealer on top.
@nicolen1655
3 жыл бұрын
Will htv apply to rough barn wood? Or just smooth wood
@AngieHolden
3 жыл бұрын
I would just do smooth wood.
@mandyunger3878
3 жыл бұрын
Do you seal it after you put on the wood?
@AngieHolden
3 жыл бұрын
If it is for indoors, I don't. Outdoors I will add a few coats of polycrylic.
@Kksy84able
2 жыл бұрын
What temp and time for this
@AngieHolden
2 жыл бұрын
Wood is tricky. I usually play around with the lowest time and temperature that is recommended by the manufacturer of the HTV and see if I can get it to stick.
@tammybeichner5763
3 жыл бұрын
Will this work on painted wood
@AngieHolden
3 жыл бұрын
Yes it will. You will need to make sure the paint is completely dried and cured.
@BeautifulDisaster2121
3 жыл бұрын
Can you paint the wood and then add HTV?
@AngieHolden
3 жыл бұрын
I have before. Just be sure to let the paint dry for a few days as you don't want to pull the moisture out of it.
@lauriemartin5450
4 жыл бұрын
great job, love it. what was the font you used?
@AngieHolden
4 жыл бұрын
I think this was hand lettered. It was a design in Design Space.
@lauriemartin5450
4 жыл бұрын
@@AngieHolden thank you for replying back to me . Have A MERRY CHRISTMAS.
@ashleywelch2618
4 жыл бұрын
Do you have to mirror it
@AngieHolden
4 жыл бұрын
Yes you will need to mirror your cut and place your heat transfer vinyl shiny side down on the mat.
@TheThraser08
Жыл бұрын
You can see where you edited the video in 2 places
@AngieHolden
Жыл бұрын
All of my videos are edited sorry if that bothers you.
@damianlopez211
3 жыл бұрын
What can I do different
@damianlopez211
3 жыл бұрын
I heat pressed on painted wood and my paint started to bubble
@AngieHolden
3 жыл бұрын
The number one cause of that is not allowing your paint to dry long enough as the moisture is coming out. I would allow the paint to cure a minimum of 72 hours before attempting this.
@selenabrown2309
3 жыл бұрын
Tried this for the first time and totally ruined my project :/ My vinyl crinkled so bad.
@AngieHolden
3 жыл бұрын
Hmmmm....my guess would be the heat was too hot?
@melissadrinkwinebutt
10 ай бұрын
how is this on a piece of paint wood?
@AngieHolden
10 ай бұрын
It does work. Be sure to allow paint to cure and use a low temp/time HTV.
@feliciaallen2568
3 жыл бұрын
I did heat transfer on painted woodround but the paint lifted... Did i heat it too long???
@AngieHolden
3 жыл бұрын
On painted wood, you want to be sure to let the paint cure for at least 24 hours before pressing. The moisture from the paint can also lift.
Пікірлер: 158