Thank you. I was searching for a video that shows how to install the guide and your explanations were really good.
@JukiJunkies
Ай бұрын
Glad to hear that!
@dollyquiltsandknits1313
2 жыл бұрын
Thank you for these videos ! I am so in love with my 2010Q. Just for discussions's sake, I just got your 1/4 inch compensating foot in the mail yesterday, and am using it for piecing a small quilt. It is performing wonderfully for my quarter-inch seams. Stitch length is just where I set it. I'll go back to using the original foot when I want a scant-quarter again, but this is making sewing long seams/borders a BREEZE !
@JukiJunkies
2 жыл бұрын
Watch our new video that publishes Dec 26th @4pm its going over all the 1/4" feet
@CrazyCountess
Ай бұрын
Thank you! I thought I was missing the set screw, but it is in the machine, phew!
@elizabethmika5090
2 жыл бұрын
New juki junkie fan. I love ❤️ all of the tutorials.
@JukiJunkies
2 жыл бұрын
Thank you Elizabeth. Glad you are here. Call us anytime if you need anything. Gigi
@kayeccleston9917
Жыл бұрын
Great machine and accessories, with one significant exception. Been sewing since I was a 12-yr-old 4-H kid, and that stitch guide is the most cumbersome and awkward device I’ve ever encountered.
@lindaphillips884
11 ай бұрын
So agree, I've stopped using it completely.
@Lottiefla
Жыл бұрын
Hmmm. Thank you. I tried to use the even stitch guide the other day with the walking foot and never did figure it out!😂
@lindaphillips884
11 ай бұрын
It is very cumbersome to put on, I don't use mine.
@karenlea5292
2 жыл бұрын
Just what I needed, especially related to FMQ. Boki, you’re a wonderful teacher!
@JukiJunkies
2 жыл бұрын
Thank you :)
@quiltfairie
2 ай бұрын
Just in case you DO lose the bolt here is the measurements and replacement info if you were to go to a hardware store. It is metric size 4 /diameter .157 /with a pitch (bolt thread size) .157
@karenpack8111
2 жыл бұрын
Thanks so much for this video, I just purchased the TL18 and I'm loving it!! I haven't had a chance yet to try out all the feet. So glad I went it that model. Great job explaining each piece.
@MsKentta
2 жыл бұрын
Thanks for the demo Boki certainly helps! Especially appreciate the settings you showed for FMQ
@JukiJunkies
2 жыл бұрын
Your very welcome 🙏 Gigi plans on doing a tutorial on fmq soon.
@pattyharp725
Жыл бұрын
I have wondered about the black screw. Thank you.
@debbiebacot6667
2 жыл бұрын
Thank you
@ruthannpickett6150
2 жыл бұрын
Thank you! Really good, clear video. I appreciate that!
@JukiJunkies
Жыл бұрын
Glad it was helpful!
@kathyboggess7263
10 ай бұрын
Lots of great info but it would be greater if you could just not talk so fast. After a lot of research, I'm about to buy the TL-18QVP. Juki Junkies has, by far, the most useful videos and gave me all the info I needed to make a decision. Thank you for such great content.
@JukiJunkies
10 ай бұрын
Thank you, I will work on that :) Let us know if you have any questions we are happy to help you. 813-661-9000
@marcellebarrett5866
2 жыл бұрын
Thanks!
@leemiller2811
10 ай бұрын
Excellent.
@mollynelson3672
2 жыл бұрын
Thank you for doing this!
@JukiJunkies
Жыл бұрын
My pleasure!
@pamelathornton8643
2 жыл бұрын
Thank you for sharing. I found your tutorial very helpful
@jenyoung6919
2 жыл бұрын
Thanks Boki, great video. I loved your explanation of where to place the pressure foot pressure based on what you’re sewing, it’s the first time I’ve heard this. I have the TL2010 and recently purchased the walking foot guide, it is very tricky to attach. One question I have about the walking foot is it leaves black dust after I’ve been sewing for a while, which is frustrating when quilting a light coloured fabric. This is my second walking foot, as I had the same issue with the first one and it was replaced under warranty. I’ve seen others mention this same issue. Is there anything that can be done to fix this - cleaning, oiling or putting tape or something on the bottom of the foot so it doesn’t leave the black dust on my quilts? Thanks
@dcwatashi
2 жыл бұрын
Well since they didn’t respond to you maybe reach out to Juki themselves
@JukiJunkies
Жыл бұрын
kzitem.info/news/bejne/2K6ksHebcnyCmoo here is a video i recommend watching. If doing these things doesnt help, file another warrant. :) Sorry for the delay in response; its hard to keep up sometimes or they go MIA.
@JukiJunkies
Жыл бұрын
kzitem.info/news/bejne/2K6ksHebcnyCmoo here is a video i recommend watching :) If doing these things doesnt help file another warranty :) Sorry for the delay in response its hard to keep up sometimes or they go MIA.
@emcbabe
Жыл бұрын
I had the same problem. It comes from a certain place in the walking foot that is not oiled properly. Even though my machine was new, and I hadn't used the walking foot before, the place that needed to be oiled was dry. I followed Juki Junkies to learn how to oil it, and the difference in its appearance lubricated versus dry. Saved me $200 at the quilt shop for service to figure out what was wrong. I removed most of the black dust on the fabric by dabbing with scotch tape. The machine also came with a fair amount of oil spilled on the bottom inside plate that you remove to oil certain parts of the machine. I adore my Juki 2010, but Juki didn't ship it to me in good shape. That's weird.
@martharoppolo9388
2 жыл бұрын
Thank you for the clear explanation, what threat is recommended for sewing vinyl in 2010Q
@JukiJunkies
2 жыл бұрын
jukijunkies.com/product/the-essential-bundle/ check out our glide 40w thread 100% polyester thread made in the USA. Very strong and has a great shine.
@annhogg8913
2 жыл бұрын
Brilliant thank you
@JukiJunkies
2 жыл бұрын
You're very welcome
@Renuewspa
2 жыл бұрын
Can you show how we can user the clear free motion table in the longitude. Thanks
@barbcnockaert5062
2 жыл бұрын
This video is wonderful. I’m getting to know my JL18Q. My question is how fast can I go with the walking foot? Thanks so much!
@JukiJunkies
2 жыл бұрын
FULL SPEED!
@barbcnockaert5062
2 жыл бұрын
@@JukiJunkies No Way!!!!! That’s fantastic!!! I love this machine, I can’t say enough about it! I make thick liners for cages and this will cut down my turn over time. Thanks for the reply.
@lindascraftsandthings915
Жыл бұрын
If using the walking foot, can you backstitch a couple of stitches with it on (to lock the stitches in place) or does it have to be forward stitches only? I know that with my Brother walking foot you aren't supposed to backstitch with the walking foot on. Thanks. 13:06
@JukiJunkies
Жыл бұрын
Correct you can back stitch with it as well :)
@lindascraftsandthings915
Жыл бұрын
@@JukiJunkies thank you! My husband and I just bought the TL-18QVP and it's good to know that I can back stitch a couple of stitches (to lock them in) without having to worry that I might damage the walking foot. 😊
@ArkcessorizeYurself
Жыл бұрын
Does juki have a binder foot
@JukiJunkies
Жыл бұрын
jukijunkies.com/product/double-fold-bias-binder-incl-sa85-38-mm/ Here it is :)
@raggedyanna6-Missy
Жыл бұрын
Hi will the even feed guide work with the Janome hd9 please?
@JukiJunkies
Жыл бұрын
I don't think so...
@cathryncoate2167
Ай бұрын
Do these accessories fit all TL machines ie TL2300 ?
@nicidalibor7201
Ай бұрын
I also own the 2300 Sumato, and up to now, I haven't found any difference to the TL18 (except the needle threader that is not installed to the 2300 when purchased in Europe)
@barbcnockaert5062
2 жыл бұрын
Love my new JL18. This video was great. How fast can I sew using the walking foot? Thanks.
@JukiJunkies
2 жыл бұрын
FULL SPEED!!
@tinamozingo6589
2 жыл бұрын
OMG! Great video. I lost the long screw!!! What can I do???? HELP!
@JukiJunkies
2 жыл бұрын
Unfortunately nothing :/ They don't sell it by itself... I will start trying to see if we can get some on our website in the future :)
@dcwatashi
2 жыл бұрын
I understood everything except the diagonal guide on the walking foot guide. I have no idea how that would work maybe there’s a video out there somewhere
@JukiJunkies
2 жыл бұрын
That's just for if youre following a diagonal design on a quilt or a design on a angle.
@dcwatashi
2 жыл бұрын
@@JukiJunkies thanks but my brain still can’t comprehend that diagonal relationship since the machine is a straight stitch machine. Most of us are visual learners these days anyway 😂
@lindascraftsandthings915
Жыл бұрын
@@dcwatashiI'm a visual learner too. I can't visualize this either. 😂
@dcwatashi
Жыл бұрын
@@lindascraftsandthings915maybe if I watch it 15 times it might sink in 🤣🤣🤣 I watched it again and I still don’t know what she’s talking about maybe there is a video out there on how to use a diagonal seam guide I could understand if you wanted to gradually turn the fabric and sew a circle maybe you just have to start to play with it
@lindascraftsandthings915
Жыл бұрын
@@dcwatashi ditto. Lol
@josholaguera8917
Жыл бұрын
How much po ang juki TL????
@bargeiger50
2 жыл бұрын
What accessories come with the 2010Q?
@JukiJunkies
2 жыл бұрын
jukijunkies.com/wp-content/uploads/Tlcompare.pdf check this out :)
Пікірлер: 64