To use a suction hose with a Kärcher pressure washer, you will need a few additional components, including a suction hose, a filter, and a detergent or chemical injector, depending on your intended use. Here's a step-by-step guide to help you:
1. Prepare the equipment: Ensure you have a Kärcher pressure washer with a detergent or chemical injector port. You will also need a suction hose compatible with your pressure washer model. Check the user manual or consult Kärcher's official website to find the right suction hose for your machine.
2. Connect the suction hose: Locate the detergent or chemical injector port on your pressure washer. It is typically marked or labeled accordingly. Attach one end of the suction hose to this port securely.
3. Prepare the filter: If your suction hose does not have a built-in filter, you will need to attach one. Filters prevent debris or large particles from entering the pressure washer system, protecting it from damage. Attach the filter to the free end of the suction hose.
4. Submerge the suction hose: Place the filter end of the suction hose into the detergent or chemical solution you wish to draw into the pressure washer. Ensure the filter is fully submerged to avoid sucking in air.
5. Start the pressure washer: Turn on the pressure washer and let it run for a few moments without engaging the trigger. This step helps remove any air trapped in the system.
6. Engage the trigger: With the pressure washer running, squeeze the trigger on the spray gun to activate the water flow. This action will create a suction effect and draw the detergent or chemical solution through the suction hose and into the pressure washer.
7. Adjust the injector settings: Some Kärcher pressure washers allow you to adjust the detergent or chemical injection rate. Refer to your pressure washer's user manual to determine how to adjust these settings, if available.
8. Start cleaning: With the detergent or chemical solution being drawn into the pressure washer, you can now begin cleaning surfaces as desired. Follow the instructions for your specific cleaning agent and the recommended technique for using the pressure washer.
Remember to always wear appropriate protective gear, such as goggles and gloves, when using a pressure washer with chemicals or detergents. Additionally, follow the safety guidelines and recommendations provided by Kärcher for your specific pressure washer model.
Kärcher Pressure Washer With Suction Hose Attachment: Review
Please remember to Subscribe to my channel it’s free
▶--------Coffee or Help with cost of Products -------◀
If you fancy buying me a cup of coffee to help and support the channel, then here is the link :
www.buymeacoffee.com/autoglea...
All donations will go towards improving the channel. Thank you very much, Steve
Some Playlists :
Karcher Products Link : • Karcher Products
Worx Products Link : • Worx Products
Cleaning Products & Reviews Link : • Product Reviews
Cleaning & Detailing Link : • Cleaning | Maintenance...
Ford cars Vans etc link : • Ford | Focus | Escort ...
Shark Cleaning & Products Link : • Shark Cleaning Products
Trofeu Models • Trofeu Die-cast Models...
Memorabilia • Ford Motoring Memorabilia
Corgi Models • Corgi / Vanguards Diec...
Hot Wheels Models • Hot Wheels Die-cast Mo...
Solido Models • Solido Die - Cast Models
Shorts Collection • #shorts & Short Story...
Real Ford RS etc • Ford | Focus | Escort ...
Негізгі бет Автокөліктер мен көлік құралдары How to use Kärcher Pressure Washer With Suction Hose Attachment
Пікірлер: 9