When working with Klean-Bloc products by Techo-Bloc, you are sure to help your clients be worry free when it comes to durability and the contrast of color it provides. But sometimes, there may be situations where we wished we had something to cover up a chip after cutting or scratches that may occur over time.
With our Klean-Bloc Repair Kit, we have created an easy to use 2 part solution mix where we can touch up those imperfections and give your clients a beautiful outdoor living space once again.
Here are the steps:
1- Clean out the part of the space you want to touch up with the Repair Kit. Make sure the surface is dry.
2- Mask the area you want to touch up with masking tape so it's easier to remove after.
3- Shake can for couple minutes
4- Put the red cap included with the kit in the bottom needle.
5- Lay on a flat on surface and hit the top of the can to release the mixture.
6- Shake the can for a couple more minutes so the 2 chemicals are blended together
7- Perform a test spray on a different surface to verify.
8- Like spraying a paint can on a car, spray short bursts back and forth so the touched up area are can blend well with the untouched surface.
9- Let dry and repeat the process as needed to get the result you want.
10- Once dried, remove the tape and as needed, spray around the area to blend with the other surfaces.
11- Let it dry and you're done.
To order, talk to your local rep or visit techo-bloc.com
If you haven't already, make sure to follow us on
Facebook: / techobloc
Instagram: /
KZitem: / techobloc
Or visit our website techo-bloc.com
Негізгі бет How to Use our Klean-Bloc Repair Kit! | Techo-Bloc
Пікірлер