This looks like a miracle. I am working on my porch and sure hope this will save my support posts. Got the wood hardener for trim and floor boards.
@pcproductsepoxy4315
2 жыл бұрын
We think you'll be very pleased! Good luck with your project!
@FortressOfTheWolfMoon
4 жыл бұрын
Repairing some rot spots on my moms log cabin. My great grandma my grandma my mom and my self have all lived here. Hopefully this can help so this cabin can stay in family for generations to come. Plus there are many more repairs to go and many already done.
@pcproductsepoxy4315
4 жыл бұрын
Good luck with the repairs...hope our products can help the cabin provide many many more years of enjoyment to your family.
@PplEtr
6 жыл бұрын
Great video! I need to mitigate damage to the framing of my home caused by improper flashing of deck and windows. I can see rot, but there also appears to be dry rot. I have read that dry rot is actually a fungus that grows in less damp conditions. What I have read about dry rot says that I need to kill the fungus with a borate spray. Does PC Rot Terminator also work for dry rot? If it does, do recommend applying it before the borate wood preservative, or after?
@pcproductsepoxy4315
6 жыл бұрын
Great question! You can definitely use the borate spray before applying Rot Terminator.
@haunterbuythem137
2 ай бұрын
Does the product makes the wood expand?
@pcproductsepoxy4315
2 ай бұрын
No it does not expand or shrink the wood.
@genevievepilon8677
4 жыл бұрын
I am restoring a 6x6 wood beam. I think I use to much product because it's still wet after one night. The temperarure is 10 celcius. How many days should I wait before apply pv woody?
@pcproductsepoxy4315
4 жыл бұрын
The cure time for PC-Rot Terminator is 1-3 days at 24 degrees celcius. The lower the temperature the longer the cure time. If you are able to apply some heat to the beam that will increase the cure rate. You should wait until the PC-Rot Terminator is hard before applying the PC-Woody. Unfortunately there is no exact number of days we can give you.
@micheleantonello3187
3 жыл бұрын
You mention that the bottle will only do three fills. I purchased 1.5 gallons and it only came with one bottle so I am wondering how I can complete my projects. How many bottles did you use to complete this project?
@pcproductsepoxy4315
3 жыл бұрын
In the video he is using the 24oz size, he was referring to that amount. You can use all your product in the bottle that came with it. If there will be a significant period of time in between uses be sure to clean the bottle and cap with denatured alcohol, mineral spirits, acetone or even rubbing alcohol.
@adohko
2 жыл бұрын
Will this product penetrate and harden particle board and if so, how long is the cure time? Also, once hardened, is it protected against moisture?
@pcproductsepoxy4315
2 жыл бұрын
Yes it will work on particle board. Cure time is the same as any other wood, 1-3 days. Once cured the wood will be waterproof.
@bellyisis
4 жыл бұрын
What’s the difference between your Pc wood hardener & your rot terminator??? I would need use on our foundation sill. Would need both,& if so do you do 1 first than the other 2nd?? Thank you
@pcproductsepoxy4315
4 жыл бұрын
You only need to use one or the other: PC Petrifier wood hardener is a single component water based wood hardener for decorative wood such as sills, sashes and frames. Rot Terminator is a 2 part epoxy hardener for structural or load bearing situations such as support beams. Then PC Woody can be used to fill in any gaps or voids in the wood.
@susanjoyce6688
5 жыл бұрын
Great video. Thank you. I live in a 250 year old home near Emmaus, PA. Can I contact you on how to make repairs to my log home?
@pcproductsepoxy4315
5 жыл бұрын
Thanks Susan! This video was done in Emmaus. Call 800-220-2103 or email chuck@pcepoxy.com.
@pcproductsepoxy4315
5 жыл бұрын
1-800-220-2103
@redinabloogs8477
3 жыл бұрын
I don't understand. Are you not doing the other logs? Cuz if u are u need to mix about 1000 more of those bottles to do the 4 bottom logs around ur cabin.
@pcproductsepoxy4315
3 жыл бұрын
Lol!! this was a video just to give you a demonstration of how the product works.
@redinabloogs8477
3 жыл бұрын
@@pcproductsepoxy4315 so ur saying it would b unrealistic to use the product in this way?
@pcproductsepoxy4315
3 жыл бұрын
@@redinabloogs8477 not at all...we offer the product in larger sizes.
@jwolf0202
6 жыл бұрын
Do you need to drill or cut out the remaining rotted wood before applying?
@painful5429
6 жыл бұрын
Unless that rotted wood is loose I am fairly sure you don't have to. The chemical turns rotted wood into hard usable material again which can be sanded and repainted as necessary
@PatoLoco1833
5 жыл бұрын
Great demonstration. In order to restore the shape of the damaged 2x6, can I use PC Woody Epoxy (A&B) after applying PC Rot Terminator?
@pcproductsepoxy4315
5 жыл бұрын
Yes that is a perfect application for PC Woody. Wait about 30-40 minutes after you apply PC Rot Terminator.
@PatoLoco1833
5 жыл бұрын
@@pcproductsepoxy4315 Thanks. I'll give it a try. It's hard to find the PC Rot Terminator 1.5 Gallon container here. I've tried three of the listed stores on you website. Amazon has a 2 month backlog...can I buy direct from you?
@pcproductsepoxy4315
5 жыл бұрын
@@PatoLoco1833 Yes you can buy direct immediately, please call 1-800-220-2103 to place an order. We are trying to fix the backlog issue with Amazon, thank you for bringing that to our attention.
@PatoLoco1833
5 жыл бұрын
Thank you. Michelle in customer service was a great help! @@pcproductsepoxy4315
@bmingo2828
4 жыл бұрын
Can you tell me the shelf life of the unmixed parts?
@pcproductsepoxy4315
4 жыл бұрын
2 years!
@oxlopez
4 жыл бұрын
Can you apply it with a sprayer?
@pcproductsepoxy4315
4 жыл бұрын
Unfortunately no PC-Rot Terminator is a bit too thick to be sprayed, It is the roughly the consistency of syrup.
@frasiec
4 жыл бұрын
Wonder how it handle termite damage?
@pcproductsepoxy4315
4 жыл бұрын
Once all termites have been removed. It will harden the wood and coat it to prevent further damage.
@electricamir248
4 жыл бұрын
It doesn't look viscous at all.
@chuckmoloney1381
4 жыл бұрын
PC-Rot Terminator is low viscosity. Not water thin, rather like cheap maple syrup.
Пікірлер: 38