I appreciate that you did the close-up of this video. Thank you for these great Instructions.
@kylieb4836
3 жыл бұрын
Ahhhhhh, you’ve answered my question - “the pin gets squished”. For the life of me I couldnt see how this would work... Thankyou so much. Where would we be without KZitem instruction vids? Probably still sitting here looking at the kit and assuming they’ve sent me the wrong parts....🤣🤣🤣🤣🤣
@SpencerOgg
3 жыл бұрын
Glad to help xx
@elizabethprocter1031
2 жыл бұрын
You bought the exact same set and I'd had problems, so glad I've come across this, thanks!
@ndivmakatu
4 ай бұрын
Am happy too. I have cut all my wallet but struggled with putting them together. Now if I need to squash it am going to try again
@karlaquantd3333
2 ай бұрын
Your explanation is very clear. Thank you.!!!
@kymclinton3140
Ай бұрын
Thank you my set from TEMU arrives hopefully Tuesday
@SpencerOgg
Ай бұрын
Have fun!
@bernadettevincent7570
Жыл бұрын
Thank you for the tutorial, great explanation of how to use it, which parts to use where, etc. I would, however, mention not to press too hard on the machine. The bottom bit where you place the cap is not that strong. You do not need too much pressure to get the KAM together.
@SpencerOgg
Жыл бұрын
Great tip 😃
@dadeedum1232
3 жыл бұрын
I can't get the point to squish, it kinda bends off to the side. it then blocks the fastening and makes it useless. How do you get it to squish perfectly?
@SpencerOgg
3 жыл бұрын
Check your pliers are set correctly for the cap size and the correct grommet is installed. Also there are some cheaper sets on the market that arent quite as good, so without seeing it, it's quite hard to say for sure. Sorry I can't help more
@GrandmaTill
6 ай бұрын
Thank you it was awesome
@kazzya1281
4 жыл бұрын
Cool , I got mine done with your KZitem thanks u . Can you tell me who you get yours from , the snaps colours looked really good solid colours
@SpencerOgg
4 жыл бұрын
Link to the set I bought UK: amzn.to/2vAPDwb US: amzn.to/2Ob0SBE Other similar available snap sets UK: amzn.to/3aORP3j
@TheLittleHorrorWitch
3 ай бұрын
You are absolutely a lifesaver thank you so much
@SpencerOgg
3 ай бұрын
Happy to help!
@jessicamarsh9779
3 жыл бұрын
Oh my gosh. I literally thought the same thing when I first saw the snaps, I just thought they looked “cheaper”. But after seeing them on some wallets etc, they looked cute & made me wonder about them.
@nancylarson3362
2 жыл бұрын
❤️
@nancylarson3362
2 жыл бұрын
❤️
@sparklemint2458
9 ай бұрын
❤
@preacherman9018
2 жыл бұрын
I bought a couple bags for guy gear projects from Hobby Lobby. I was disappointed with the two tools for securing them. Used a punch and hammer without success as well. Next attempt will be to melt the tack center with a soldering iron. I will grind, and file to shape the tip just right. I think that might be the working solution for those of who might not order or find that good tool locally..
@SpencerOgg
2 жыл бұрын
Thanks for the tip. My pliers sound a lot easier :)
@preacherman9018
2 жыл бұрын
They look like the right tool for the job. Your viewers who use those snaps for various projects would be ahead ordering your plyers. Have a great week! kzitem.info/news/bejne/xYKBsI15bqCKYHo
@KashmalaJanJan
4 ай бұрын
I parchas this
@KashmalaJanJan
4 ай бұрын
Great mam❤
@Mikeyzom
Жыл бұрын
Thank you so much
@teedoubleu9602
3 жыл бұрын
Thank you for this video. It really helped me.
@ronirodriguez8287
4 жыл бұрын
Thank you Diane! Loved the video and I can't wait to open my box. Oh! I love the cord wrapper!! I need to make about 100 😂😂. 😍😍 Roni
@chirpychirpy2813
2 жыл бұрын
Just received my snap press and with no instructions included so your video was a life saver, thank you !
@SpencerOgg
2 жыл бұрын
Great to hear!
@angietucker125
4 жыл бұрын
Thankyou for this tutorial session as no directions came with my snaps
@SpencerOgg
4 жыл бұрын
Glad it helped Angie xx
@pterrys
4 жыл бұрын
Thank you Diane! I've been successfully using KAM snaps on my projects for several years now and have both the hand held pliers and table press for plastic snaps, metal rivets and metal grommets (I use a Crop-a-dile Big Bite to punch the holes). You get a bigger reach with the table press (and it's easier on your hands then the hand held). The plastic snaps are also available with a longer prong for thicker items. Look forward to seeing how you use them in future videos!!
@SpencerOgg
4 жыл бұрын
Brilliant thanks Terry, I'm definitely going to get hold of the dies for the table press, and maybe some of the longer prong snaps too. Great info, thank you x
@lynns755
3 жыл бұрын
Can you use any replica snaps with the KAM pliers? (Sorry Im new to this and just been looking at KAM on you tube showing their various pliers)
@oscarman60
8 ай бұрын
You have simply through your excellent demonstration explained how to use the tools supplied. I now have the confidence to use them successfully. Thank you.
@SpencerOgg
8 ай бұрын
Great to hear!
@hazelotoole4548
2 жыл бұрын
Thanks for the demonstration,
@SpencerOgg
2 жыл бұрын
You are welcome!
@shirleytetrick8061
2 жыл бұрын
Very helpful thank you I enjoy it
@SpencerOgg
2 жыл бұрын
Glad it was helpful!
@livinginthenow
3 жыл бұрын
Excellent demonstration! I had been looking at these online and wondering if they might be something I could use. Now I know a good deal more about the pros and cons of them. Thanks! (BTW, I believe the pointy thing you used to pierce the fabric would be called an awl.)
@SpencerOgg
3 жыл бұрын
Glad it was helpful! Thank you xx
@suedring8798
4 жыл бұрын
Thank you for this video, I have just purchased these and have to say the instructions were a little bit "lost in translation" lol. I think I would have struggled without your help xx
@SpencerOgg
4 жыл бұрын
Glad I could help Sue xxxx
@sandramorris7964
4 жыл бұрын
Thanks Diane. I have used Kam snaps on garments but haven't tried on other materials. I was drying my hair this morning and thought how I need a cord keeper for it, but too much time involved with sewing fabrics and Velcro. Now I will cut a bit of cork and use a Kam snap. Marvelous. Just a few minutes effort.
@Tallblueeyedgal2
4 жыл бұрын
Thank you so much for your video I just bought a kit just like this and am so new to KAM SNAPS that I did not know what to do. THANK YOU !!!! So helpful
@SpencerOgg
4 жыл бұрын
Glad it was helpful!
@lynetterene
3 жыл бұрын
Hi Diane....Thank you for this video. I had my set for about two years and decided to use it tonight....I went to the website of the company, but I did it wrong 🤦🏾♀️....so I searched KZitem and found your video....now I got it😊....thank you so much!
@SpencerOgg
3 жыл бұрын
You are so welcome!
@gillianwoods8610
4 жыл бұрын
I m just waiting for my set to arrive. Thankyou for this video. X
@SpencerOgg
4 жыл бұрын
You’re welcome 😊
@annelakeman
Жыл бұрын
thank you muchly now to start
@SpencerOgg
Жыл бұрын
Have fun!
@jaidenevans3075
3 жыл бұрын
Thanks for this! Just got the same kit and I have never used snaps before. Very helpful.
@SpencerOgg
3 жыл бұрын
You're so welcome!
@tinaforster
8 ай бұрын
Thank you. Very clear and helpful. Looking forward to seeing other videos you've created.❤🎉😊😊
@SpencerOgg
8 ай бұрын
Thank you
@chrishawke6911
4 жыл бұрын
Fantastic intro to Kam Snaps a great product to use and easy to install. 💖
@gypsygirl731
2 жыл бұрын
I got these from amazon. No instructions. The 1 st video I saw was ritz no words no explanations no names of female or male fastener no talking at all couldn’t see the snaps up close. Yours was explanatory not fast you did it on a couple of things and now I know the female from male fastener and you should’ve had your video with amazon attached . Thank you for figuring it out. Also, thanks for showing us there’s many sizes of snaps. I saw how on that spritz video they unscrew the caps and spring to put the bar tool in but we didn’t need that at all. Your ace brilliant😺👍
@SpencerOgg
2 жыл бұрын
Oh thank you - so glad it helped xxx
@Linda-ep3mc
Жыл бұрын
First video that made sense. I’ve watched several and this one makes total sense thank you
@irenelindsayjewerlycrafts2251
4 жыл бұрын
Thank you I just received mine and your video helped me more than you know 😊♥👼 I subbed also :)
@SpencerOgg
4 жыл бұрын
Awesome! Thank you!
@shanaazmohammed7713
2 жыл бұрын
I got mines today and it squeaks the same way🙈🤣🤣
@SpencerOgg
2 жыл бұрын
🤣🤣 - part of the charm 🤣🤣
@shanaazmohammed7713
2 жыл бұрын
@@SpencerOgg 🤣🤣 when I am squeezing it it's like I'm afraid I squeeze it too hard🤣🤣🤣🤣 but then realized I NEED to squeeze it for it to fix properly
@hannahjones8992
Жыл бұрын
Thank you for this nice clear video, I've not used the plastic poppers before either, just received delivery, and I'll be popping away happilly after your help. God Bless 🙋♀️🙏🏻❤️
@SpencerOgg
Жыл бұрын
Brilliant - enjoy!
@Gingerjake2
2 жыл бұрын
Thank you so much! I was worried about using this set as I just wasn't sure I had faith in a plastic snap. You've given me that! I have also subscribed...
@SpencerOgg
2 жыл бұрын
I'm so glad! Thank you xx
@patm8751
4 жыл бұрын
Great tutorial!! You made it look so easy and it was! Thanks .
@SpencerOgg
4 жыл бұрын
Glad it was helpful!
@peterridgley1161
4 жыл бұрын
Thanks Debbie, have been using them on various projects now. Brilliant on thin leather, card, etc. Just be carefull if you are using materials such as hand or machine knitted woolen items to use a backing as the snap will just pull away and ruin your project.
@SpencerOgg
4 жыл бұрын
Great tip, thanks Peter. xx
@surinthidaromero5617
3 жыл бұрын
I currently have plastic snaps. They have not been consistent. I go through so many snaps before they go in. Even when I think they are snapped, they fall out after being washed and dried. I am looking into changing to KAM to see if they offer better snaps.
@SpencerOgg
3 жыл бұрын
I think I have been lucky with the economical set of plastic snaps I purchased. If you buy KAM snaps you will be assured of a good quality
@AderonkeOgungbamila-ry6cn
Жыл бұрын
So nice
@SpencerOgg
Жыл бұрын
Thanks
@MarciaBaker1205
2 жыл бұрын
Thank you for this video. I have bought cam snaps for baby bibs,etc, & always had a problem doing it. Watching this is so helpful.
@SpencerOgg
2 жыл бұрын
Wonderful!
@BagsbyBagsofStyle
4 жыл бұрын
hi Diane, you can buy Kam snaps with longer prongs for thicker fabrics, you can also buy metal kam snaps...never tried them I would assume you need a different tool for fitting them though.....buying the cheaper ones can be risky as many are really poor quality, lots of people use them for baby clothes so better to buy genuine ones that rarely fail than cheaper ones that are less reliable....if you buy genuine ones, they come in four sizes x
@SpencerOgg
4 жыл бұрын
Great info, thanks Christine. I must try and get hold of some of the metal ones to give them a try
@susangoodin2631
4 жыл бұрын
Received this for Christmas. Love it! Works great for me as I make quite a few small items.
@amandapipe4893
2 жыл бұрын
Thank you so much for this. My box of snaps has been hanging around for ages as i was abit scared to try them out. Now i know how easy they are to use, i'll be snapping everything!
@SpencerOgg
2 жыл бұрын
Great to hear :)
@katemorris9326
4 жыл бұрын
Great video Diane, you’ve certainly taken the mystery out of Kam snaps. Looking forward to seeing how y out incorporate them into one of your patterns.
@SpencerOgg
4 жыл бұрын
Thanks Kate - watch this space!
@Missypink960
2 жыл бұрын
Thank you for making a video about the snap device. Your instructions were clear and concise, making it super easy for me.
@SpencerOgg
2 жыл бұрын
Thanks. Great to hear! xx
@patfrontuto5342
3 жыл бұрын
I just received these from MartelliEnterorises with extra parts. I did however, go through a few before they worked good! There are 10 pieces of each and twenty on the ones with the needle type head.
@SpencerOgg
3 жыл бұрын
Thanks for the info!
@TheMaggiemay77
3 жыл бұрын
Does anybody know that if you squeeze too hard you can do something to make the snap not work right? Because I put some snaps on my granddaughters dress but they don’t make a nice clicking snap sound when I close them together and they come undone very easily. Maybe they were just faulty snaps but they are Kam snaps.If anybody has any advice on this I’d be happy to know it. Thank you
@SpencerOgg
3 жыл бұрын
There are a few things to check. Have a look at troubleshooting Kam Snaps here: kamsnaps.com/pages/troubleshoot
@TheMaggiemay77
3 жыл бұрын
@@SpencerOgg thank you!! Helpful video!!!
@emmabrodiebear663
3 жыл бұрын
Great video, thank you. It’s been a year, do you still like it - I’m wondering, are the snaps holding up? I’m considering getting this for diy sanitary pads and whatever else. I like your cord holder idea. Thanks again! 😊
@SpencerOgg
3 жыл бұрын
Yes and yes, still going great!
@izabeau1953
4 жыл бұрын
Just like you I have had 3 tools and thy are all the wrong ones. So I saw a video the other day and it looked easy , and I tried but my tool is not right it does not squeeze the point down it pushes it to the side and on the cap it actually presses it almost out and brakes the whole thing. So I am fed up with my tools 🛠 that I have. Need to go and see if I can get the right one this week. I love the snapper if only I knew how to use it years ago.
@SpencerOgg
4 жыл бұрын
Check the box - there may be some additional grommets/dies in there
@donb3557
3 жыл бұрын
Very informative and well maintained nails make the close ups easy on the eye. Thank you for your production👍
@SpencerOgg
3 жыл бұрын
Glad you like them!
@dorothydavenport6595
Жыл бұрын
Brilliant video, I love the way you explain everything in a simple way.
@SpencerOgg
Жыл бұрын
Many thanks!
@williamgarnett8796
Жыл бұрын
Your Very Good
@SpencerOgg
Жыл бұрын
Thank you
@williamgarnett8796
Жыл бұрын
I like the love Heart too :)
@shirley3012
2 жыл бұрын
You've certainly taken the mystery out of it . A wonderful demonstration, thank you so much.
@SpencerOgg
2 жыл бұрын
Glad it was helpful!
@barbarastott8940
4 жыл бұрын
I have used these snaps but some of them seem to fail don't know if its me or the snaps and they are a devil to get off I have started clipping them together first to make sure they fasten before I attach but some of the outers on the female parts seem to collapse
@SpencerOgg
4 жыл бұрын
I haven't had any problems with them at all so far and I've used them a lot now. Which set did you buy, was it the one I linked to Barbara?
@joycethigpen5230
3 жыл бұрын
Thank you so much!! Great tutorial...
@SpencerOgg
3 жыл бұрын
You're very welcome!
@aneesakhan6580
7 ай бұрын
Thank you used my kit easily due to your tutorial.
@SpencerOgg
7 ай бұрын
Glad it helped!
@debbietanton6798
Жыл бұрын
I just got my set from Temu!!! Thanks for the instructions!!!!
@SpencerOgg
Жыл бұрын
Have fun!
@kymclinton3140
Ай бұрын
I'm just waiting for my set from TEMU anyday now
@lorirodgers4119
4 жыл бұрын
so glad you did this - I ordered some myself after watching this and am so pleased with the little extra they give projects!
@NancyLynn
3 жыл бұрын
Awesome tutorial....thank you!
@SpencerOgg
3 жыл бұрын
You are so welcome!
@sylviabrown6127
4 жыл бұрын
Great
@deborahhumphrey1359
4 жыл бұрын
Just so you know you really don't need to squeeze real hard, thats why we use so many of them lol
@SpencerOgg
4 жыл бұрын
Thanks Deborah, I'll try not being so heavy handed lol
@italis2542
2 жыл бұрын
Smashing video! Very informative!
@SpencerOgg
2 жыл бұрын
Glad you liked it!
@italis2542
2 жыл бұрын
@@SpencerOgg Thanks!
@suefletcher1186
3 жыл бұрын
Great video, as always ❣️x
@SpencerOgg
3 жыл бұрын
Thank you!! 😊
@freeofusmartinez5199
4 жыл бұрын
I didn’t get tweezers ☹️
@SpencerOgg
4 жыл бұрын
Contact them and check
@jeanneandersen1638
4 жыл бұрын
So happy u received this set, I'm still waiting, hummm must be two month . Sad, was excited...
@SpencerOgg
4 жыл бұрын
Did you order thru Amazon? - just let them know they will immediately refund or re-despatch
@staceyazzinaro-gilfillan17
4 жыл бұрын
Great video, Diane. I'm looking forward to trying these out! Thanks for demystifying them for us :-)
@SpencerOgg
4 жыл бұрын
Glad I could help Stacey xx
@rourkuscreations
4 жыл бұрын
After watching this video I've had to go ahead and order a set, I've been sat on the fence for too long. Thanks Diane x
@sandyreddan3995
11 ай бұрын
I have covered them with fabric by cutting a small circle and drawing it up around the spike part. That way look more fancy for those who don’t like the look of plastic or don’t have the right colour
Пікірлер: 140