There are as many ways to build engines as there are engine builders. I'm a micrometer guy myself, but I'll use plastigauge as well. Keep making great videos, Lou. 🤠👍
@lesgaal4017
Жыл бұрын
Mate you are 100%right I've never used plasti-guage building engines, you can't go wrong with precision measuring tools.
@scottsquires6186
Ай бұрын
Plastage is not as good but it definitely works pretty well it not perfect
@19blue58
2 ай бұрын
Over here in Australia GMH Workshop manuals gives a complete overview of how to use Plastiguage in rebuilding Holden and Chevrolet engines. A side note the photos of the Small Bock 350 shows a 4bolt main Big Block Chevrolet engine never a stock engine in the holdens of the Era
@ryanpitt4633
9 ай бұрын
I've been watching you since I was a teenager I'm glad to see your still here to help
@andrewwasson6153
2 ай бұрын
If I have a crank, block and rods that I’ve just gotten back from a reputable machine shop who have ground and polished the crank and I’ve got a set of quality bearings then it should go together without any issues. Many shops that grind and polish cranks, supply bearings which makes it just that much more promising. If I can’t beg, borrow or steal a calibrated micrometer and a calibrated bore gauge, Plastigauge is my sanity check.
@lordsauto
Жыл бұрын
Been a fan for a long time. U we're supposed to build me a motor but somehow didn't work out. Love ur vids Thanks Kerry
@Myvintageiron7512
Жыл бұрын
Sorry!
@lordsauto
Жыл бұрын
@@Myvintageiron7512 are u still up for it? I'm interested..
@fukemallgarage
Жыл бұрын
The first time I saw a plastigauge used was on your tailgate rebuild. Great info as always. Awesome to see some new episodes from My Vintage Iron.
@Myvintageiron7512
Жыл бұрын
Cool, thanks!
@HK47Elite
Жыл бұрын
Got my crank back and my machinist told me it was a 10/10 grind when I was leaving. Came to find out it was 20/20 thanks to plastiguage lol. So better than nothing in my book! I am going to buy measurement tools for my next build though
@Myvintageiron7512
Жыл бұрын
Yep always double check sometimes busy shops get mixed up
@garageforcerestos
Жыл бұрын
could you do a video where you compare the measurement from the plasti gauge and the measurement tools?
@littlebastardsracing49
Жыл бұрын
This man knows what he's is doing 💯 experience is key I have never seen a video where he hasn't been 100% correct 🏁
@nuvey7939
Жыл бұрын
My problem with plastigage is that it requires me to use my subjective estimations to determine the clearance. I use it on lawnmowers and shit, but you'll never see me using it on an engine I care about. I agree 100%, it's better than not using anything, but only a little, because you're still guessing. Buy the tools if you're rebuilding engines. If you aren't, take it to a machine shop and they will do it for you
@manitoublack
Жыл бұрын
best way to check journal taper? Plastigauge
@amiabledave50
Жыл бұрын
Good video..
@rickyfulks889
Жыл бұрын
It would b interesting to c a comparison with bore gauge to plastigauge
@ucnhtmenow1
3 ай бұрын
I roasted the crank because i wanted to make sure nothing was binging but it still looks like yours does. It's not deformed, or so it seems, from rotating the crank. Whoops
@Spokavriel
10 ай бұрын
Wouldn't be surprised if this is already stated. But you really need to say to clean off all the plastigauge because it measured it by filling your clearance gap. I can see someone thinking because it wasn't said its ok to skip thinking the oil would wash it away in operation or it would somehow break down to a lubricant.
@abdouliejallow7642
Жыл бұрын
since you dont mention how much inch clearance is good or bad it will be hard to understand the whole video to avoid mistakes in rebuilding your engine...u need to explain the effect of too much or too little engine clearance and how damaging it can do on an engine
@markw95
Жыл бұрын
Plastiguage is a comparative measurement I.e. not entirely accurate, so I agree with you, use accurate measuring tools
@jacjumpin7471
Жыл бұрын
1965 High School Auto Tech class Plastigage was used to check bearing wear with motor in car Not clearence on a rebuild
@bigstuff52
Жыл бұрын
Thanks for posting..
@Myvintageiron7512
Жыл бұрын
You bet!
@garagesociety9907
Жыл бұрын
Great.
@abdouliejallow7642
Жыл бұрын
in the process of installing the plastigage u need to to do off camera
@one62projects
Жыл бұрын
Can the gage work be done on all the bearings at the same time
@1959triumph
Жыл бұрын
How do you increase the clearence if you measure it and it's not big enough
@Fizzer99
Жыл бұрын
get smaller bearings.
@Myvintageiron7512
Жыл бұрын
@@Fizzer99 change to a different bearing
@mrctuned2844
Жыл бұрын
Most bearing manufacturers will make a standard bearing, one that is .001" oversized, and a set that is .001" undersized. You can mix these bearing halves to get the correct clearance.
@JTsMechanicShop5748
Жыл бұрын
What oil pressure do u get with these bearing clearance with a stock oil pump and at what RPM
@nickgallo9129
2 ай бұрын
The video scarcely shows what he is doing. Does he useva rid besring in between the rod cap and the journal?
Пікірлер: 36