I already love it Harold. I'll be here. I would love to see someone do the same lessons with Touch DRO cause that is what I use.
@AmateurRedneckWorkshop
2 жыл бұрын
Thanks Terry.
@roysweatman6327
Жыл бұрын
I very much enjoy watching and learning from your DRO series. Thank you for doing them.
@AmateurRedneckWorkshop
Жыл бұрын
Thanks for viewing Roy.
@TheKnacklersWorkshop
2 жыл бұрын
Hello Harold, Another good video on the DRO... thank you... Take care. Paul,,
@AmateurRedneckWorkshop
2 жыл бұрын
Thanks Paul.
@TinkerJohn_W5CYF
2 жыл бұрын
Great info...much better than the "Chinglish" manual.
@AmateurRedneckWorkshop
2 жыл бұрын
Some of the manuals are a problem. Thanks John.
@EverettsWorkshop
2 жыл бұрын
Yeah, it would be a different mental approach using the DRO to string holes along - without it, a person has to do the trig and then move dials for the angled line. Thanks for sharing!
@AmateurRedneckWorkshop
2 жыл бұрын
It makes the difficult routine. Thanks Everett.
@TheAyrCaveShop
2 жыл бұрын
Thanks Harold, Enjoyed good demonstration and info..
@AmateurRedneckWorkshop
2 жыл бұрын
Thanls Dean.
@fredflintstone8048
2 жыл бұрын
Good demonstration. Thanks for sharing. I totally agree, if you're not sure that you're working your DRO properly, and or the material is critical and you don't want to make a mistake, do a dry run through the process for a sanity check first.
@AmateurRedneckWorkshop
2 жыл бұрын
Absolutely. Thanks Fred.
@TheMiniMachineShop
2 жыл бұрын
Didn't know you had PM DRO very nice!
@AmateurRedneckWorkshop
2 жыл бұрын
Well it came on a PM machine. Thanks Dave.
@joandar1
2 жыл бұрын
How do you know when you are half way through a forest? When there is a bear shit on this side of a tree, cause bears always shit behind a tree. Good video Harold, John, Australia.
@AmateurRedneckWorkshop
2 жыл бұрын
Thanks John.
@douglasbattjes3991
8 ай бұрын
When you set the L-Len versa L-Step, why did you use step? could you explain the difference, my book doesn't explain it very well if any, and most all of the DRO's are from China and use the same chip makers. Like all your videos, 👍👍👍👍
@AmateurRedneckWorkshop
8 ай бұрын
My understading of it is the L len is the distance between the centers of the starting hole and the ending hole on an oblique line. The next parameter is the angle of the line. Next the number of holes. Then the DRO will guide you to the proper xy location for each hole. Step is the distance between two adjacent holes. The setup us mostly the same as the length function. You put in the distance between two adjacent holes and then angle of the line and how many holes. In the end you get the same result so I am not sure where the difference comes in.
@donkeydiehard879
11 ай бұрын
My understanding was the "step" and "length" were entirely different functions. 🤔
@AmateurRedneckWorkshop
11 ай бұрын
I am not entirely sure what we are discussing here so I will have no comment. Thanks for viewing.
Пікірлер: 23