You are so welcome. I'm glad you found it helpful :)
@gailbeam2799
2 жыл бұрын
Thanks Kat for the great video. Your presetation was awesome.
@CalicoCaliDesigns
2 жыл бұрын
Thank you Gail! I appreciate the kinds words...they made my day. :)
@konnichita
Жыл бұрын
Thank you so much! It was very helpful. I just have a question, my stabilizer has two sides, one smooth and the other not. Which side should I use on top of the fabric?
@CalicoCaliDesigns
Жыл бұрын
If it's water soluble stabilizer then it should not make a difference...but check the manufacturer's instructions to make sure.
@dyanboli5506
2 жыл бұрын
Thanks for posting!
@CalicoCaliDesigns
2 жыл бұрын
You are welcome :)
@Ms88keys1
3 жыл бұрын
Great video,...........Question: I embroider T shirts using water soluble stabilizer for backing stabelizer. I also want to use Tender Touch stabelizer afterwards to prevent skin irritation. Is it ok to tear off the water stabelizer and not worry about dissolving the little bits since I’m ironing on the Tender Touch thereby preventing the little bits from being felt or seen?
@CalicoCaliDesigns
3 жыл бұрын
Yes that would be fine…as the little bits will just dissolve once it’s washed :)
@Ms88keys1
3 жыл бұрын
@@CalicoCaliDesigns thanks so much
@rmginformation
Жыл бұрын
Good job medam
@CalicoCaliDesigns
Жыл бұрын
Thank you very much
@1minfunfacts
Жыл бұрын
Hi, I sketched with permanent marker on the WSS and stitched over it to my clothe. But now I'm afraid the ink will come off once I wash it, is there any way to prevent smugging from happening?
@CalicoCaliDesigns
Жыл бұрын
I haven’t tried to wash permanent marker but I would say to toss a color catcher into the laundry with it, that way if the ink does run, the color catcher should get it. If you are not familiar with color catchers you find them in the laundry aisle. I also did a video about color catchers...you can find that here: kzitem.info/news/bejne/xoKKr4Sle4OZn4o I'm also wondering if you should wash the garment with cold water, and have you ironed it to heat set the marker?? Again I'm not sure if that will work since I don't have a lot of experience with permanent markers, but it's worth a try. Good luck! Let me know how it turns out. XOXO - Kat :)
@marinadi532
3 жыл бұрын
Very helpful
@CalicoCaliDesigns
3 жыл бұрын
Thank you! I’m so glad this was helpful 😎
@ellieshpiz2846
Жыл бұрын
Is there a top or bottom to the water soluble stabilizer?
@CalicoCaliDesigns
Жыл бұрын
No there is not a specific top/bottom to the water solution stabilizer. Good question 😊
@sintafikom99
7 жыл бұрын
Thanks. Very helpful
@CalicoCaliDesigns
5 жыл бұрын
Thanks so much! I appreciate your support.
@dcwatashi
3 жыл бұрын
I watched another video where she put a paper towel over top and lightly sprayed it with water ironed it a little bit and the water soluble stabilizer came right off
@msweisenbb
6 жыл бұрын
Excellent information -- very well presented!
@CalicoCaliDesigns
5 жыл бұрын
Thanks so much for your support Barbara! I appreciate it.
@TheAien123
4 жыл бұрын
what type of sweing machine is it?
@CalicoCaliDesigns
3 жыл бұрын
I have the Brother Innovis 4000D.
@vandanasanjay4032
4 жыл бұрын
Hi, why do we need wash away stabilizer in spite of base stabilizer? Basestavilizer will remain with the towel know? :🤗
@CalicoCaliDesigns
3 жыл бұрын
The wash away keeps the stitches from sinking into the towel... without it the embroidery will not look as good, as it will be partially hidden by the fibers in the towel..you need to use both the base stabilizer and the topper stabilizer for the best quality stitch out.
@normarivera1530
2 жыл бұрын
Hi @@CalicoCaliDesigns what do I have to use as base stabilizer. And which stabilizers you recommend for base & top.
@teresarivas6944
2 жыл бұрын
Dónde lo puedo comprar
@CalicoCaliDesigns
2 жыл бұрын
Hi Teresa, you can buy water soluble stabilizer at your local embroidery dealer, or Joann Fabrics, and I've seen it on Amazon as well. There are lots of different brands..I recommend trying a few and seeing which one you like the best.
Пікірлер: 31