Really cool stuff. Going to try this on my Cromwell. Griff
@andyoertig2007
6 жыл бұрын
My experience is you will find the heaviest concentration of dust on the Rear of the Vehicle as well as the Rear Fenders & Back Deck...
@chrisglover2990
6 жыл бұрын
Air brush thinner is a good substitute for fixer. Dampen the area with thinner. Then load pigment on your brush and tap it over the wet area. This technique is good for random mud splashes on road wheels.
@elliotgregory3356
2 жыл бұрын
Will try this. Thank you
@scotteverroad4545
Жыл бұрын
You have told me in a few minutes what I wanted toknow about applying pigments' to my miniatures, from Hours of Searching and listening to BS Tutorials. TY Ole Boy! Love from an American!lolGreat tutorial.
@sapper12b71
Жыл бұрын
Holy poop Batman!!! It's your face!!! Haha awesome it's nice to have a face to put to The voice.
@ShipWreck68
6 жыл бұрын
I use terpenoid to fix it to the model. I find it works better than pigment binder if you want the pigment to stay in its original state. Though if you want a caked on look, then the pigment binder fluid is very good for that.
@PeteTheWargamer
6 жыл бұрын
I have seen people use terps but I've not used it myself. How do you find the resilience? A lot of people I've spoken to say it can come away through handling.
@jasonsmith1072
6 жыл бұрын
And almost forgot but this was an awesome video thanks for the tips 👍🏻
@damehamara6827
4 жыл бұрын
You mention that you don't need to use pigment binder on the flat surfaces if you use a spray varnish. Does that rule still apply with paint-on varnishes? Should those varnishes be applied differently if there is pigment on the model?
@oscartravis5740
2 жыл бұрын
Great tips, thanks a lot
@vociferonheraldofthewinter2284
5 жыл бұрын
Should put a miniature boot print by the hatch. lol!
@IDICBeer
6 жыл бұрын
Thanks for the tips
@peterrovaniemi138
2 жыл бұрын
Old video, but what mat spray-on varnish would you suggest that I get?
@strontiumstargazer103
23 күн бұрын
On French tanks there will be lots of dandruff and scabby skin flakes.
@mrpoulpe520
6 жыл бұрын
Vive la France ! It’s a french tank
@PeteTheWargamer
6 жыл бұрын
One of my favorites as well :D
@mrpoulpe520
6 жыл бұрын
The War Gamer He can eat baguettes.
@Snakkadooby
6 жыл бұрын
Great video, I've always struggled to make weathering powders work, specifically, been unable to fix them. I've seen recommendations for isopropyl alcohol, and Lahmian Medium. I'll ned to look out for pigment binder.
@PeteTheWargamer
6 жыл бұрын
Both of those work well for the initial application but pigment binder is great for keeping the pigment from falling off through use.
@CaptRapticon
2 жыл бұрын
Would usine an airbrush varnish to seal everything in work? Or would the air just end up blowing all the powder away.
@eliasackermann4802
6 жыл бұрын
Nice Video, but when is the Worldeater Video comming?
@PeteTheWargamer
6 жыл бұрын
Death Guard is currently in progress and World Eaters is next after that.
@eliasackermann4802
6 жыл бұрын
Ok, I look forward to it😀
@sapper12b71
Жыл бұрын
Would this stuff work on Forge world resin? I have an assault drill that I would really love to make look very very nice LOL That's what drew me in finally buying forge world model I love this thing so much and I really want that Rocky just come up out of the earth effect to look good
@epicforger12345
4 жыл бұрын
Isnt that a french tank
@jasonsmith1072
6 жыл бұрын
Hey will you be doing a tutorial for the soul wars model the nighthuant ones bc I don’t have a any idea how to do that and you are my go to guy for things like this
@jackdeily8615
4 жыл бұрын
I spray my models with Testors Dullcote to seal in my paintjobs, so could I ignore the binding stage and let the pigments be bound to the model with dullcote, or would that end badly?
@Ally.Cat.252
3 жыл бұрын
How does that effect your metallic paints?
@jackdeily8615
3 жыл бұрын
@@Ally.Cat.252 While it does say on the side of the dullcote can not to use for sealing mettallics, I have never actually noticed any loss of luster. I have only used GW and Vallejo metallic paints though, I would advise against using dullcote on more realistic colors, such as Tamiya or Vallejo Metal Color (VMC).
@EternalQuestion
3 жыл бұрын
I see you also have the same iron man poster as me 😉
@Kayakasaurus
2 жыл бұрын
I didn’t know decals rhymed with pickles
@karol4601
6 жыл бұрын
Hi. Please make tutorial swamp base 😉.
@imienazvvisko
Ай бұрын
This vid is only 6 years old so im sure ill get answear... but who dares wins: is this powder equivalent of vallejo pigment?
@carabus0354
6 жыл бұрын
Why dose it have a star on it?
@PeteTheWargamer
6 жыл бұрын
So this particular tank (22 Vecors) was originally captured by the Germans following the fall of France but was re-captured by the Allied forces following their invasion of France. Many tanks like this that were still in working order were put to use by the Free French forces and so were repainted using colours common to the Allied vehicles at the time. This included the Olive Drab paint work and white identification stars. This particular tank was involved in the siege of La Rochelle in 1945, there's also a picture of it here: www.ww2incolor.com/french/Char+B1+bis+vercors.html
Пікірлер: 43