Very nice. I will have to try going in multiple directions like you did the next time I use it. I just recently started making some wood rat swimbaits that take a good bit of time to make. The past two I have done have had some patches that I missed or have little dimples. I paint it on as well with a pretty thick brush and put it in the sun for a bit since I dont have a light setup yet. I was thinking I need to make a lure turner but maybe not
@JiggerzWithAttitude
Жыл бұрын
Fantastic video, short, clear, and to the point. I just bought some blanks of amazon and I can't wait to try my hand at painting and UV coating.
@customlurepainter
Жыл бұрын
Thank you
@badboycustomlures1469
Жыл бұрын
Great video yeah the UV is great stuff only thing I do different is I dip my cranks and take a heat gun over them but I brush my swimbaits
@customlurepainter
Жыл бұрын
Thanks great tip
@davidsullivan27
Жыл бұрын
Thanks a lot for this video. It cleared up some questions I have had. Keep 'em coming.
@customlurepainter
Жыл бұрын
Thank you
@fishitmiddletennessee
Жыл бұрын
This is my next upgrade. Thanks for the video.
@customlurepainter
Жыл бұрын
Thanks for the support
@Markisuncfan
Жыл бұрын
I like that. I been using epoxy and been looking at this and the KBS. I do not do alot of volume, mainly paint for me.
@customlurepainter
Жыл бұрын
It’s a nice product
@kissmybassfishing8054
Жыл бұрын
great video, may have to try UV
@travisgorman517
3 ай бұрын
Would love to show you my uv resin box setup
@customlurepainter
3 ай бұрын
Send pics
@markoharoldoronearmedpoohb7816
Жыл бұрын
If I did volume for sales maybe UV, it maybe a bit ruff one handed to make this work for me, but I’m sure I could figure out something. Epoxy is a much longer and hazardous process for the bait, I get bugs attracting to my epoxy, why I don’t know, that’s why I don’t paint much in summer, darn nat bugs!
@rosinlover7106
Жыл бұрын
You should try make a small painting booth that you can close up when you done bro best of luck 💪💯
@markoharoldoronearmedpoohb7816
Жыл бұрын
@@rosinlover7106 I placed a light at the opposite end of the shop ( about 25’) otherwise dark in the shop, bugs should have been attracted to the light, no, to the epoxy!
@rosinlover7106
Жыл бұрын
@@markoharoldoronearmedpoohb7816 i see , those bugs can be a real pain in the ass
@Cornuts1000
Жыл бұрын
I have been using a women’s nail Hansen er for the uv. Sure wish I could make a box like yours but I just don’t understand electrical stuff.
@customlurepainter
Жыл бұрын
Lol I’m definitely not the do it yourself guy, luckily I figured it out just put 2 light, 1 light bar at bottom and it works great
@woefman9467
Жыл бұрын
cool video cool setup, but i thought part of uv deal was to dunk it and then put in box like assembly line....i see you brush it...is that a preference?
@customlurepainter
Жыл бұрын
I would rather brush on, less waste
@MrHabitat009
Жыл бұрын
I mist mine with alcohol after brushing to help from brush marks or tiny bubbles
@customlurepainter
Жыл бұрын
Thank you for the tip
@The1234bonecollector
Ай бұрын
I use uv resin, but every bait I have done come out splotchy looking like the resin isnt on parts of the bait… any tips on how to get it completely smooth
@customlurepainter
Ай бұрын
@@The1234bonecollector be careful what you clean airbrush with, sounds like chemical reaction
@The1234bonecollector
Ай бұрын
@@customlurepainter what cleaner do u recommend?
@customlurepainter
Ай бұрын
@@The1234bonecollector I just use 4011 and hot water
@danielerickson3391
Жыл бұрын
Clean Armour UV works much better as a 1 component UVResin.
@customlurepainter
Жыл бұрын
Thanks for the tip
@tonywheeler7473
Жыл бұрын
@kentuckyken last i bought was 99 it will do hundreds of baits
@hengkilianawan7503
10 ай бұрын
@@kentuckyken7
@stevenfetterman916
Жыл бұрын
I recently tried the East Coast Resin/Epoxy to clearcoat some lures. Problem is, the next day i went to clean off the hook rings and the epoxy seems to be very brittle.... any idea what could cause that?
@customlurepainter
Жыл бұрын
I’m not familiar with East Coast Resin/ Epoxy, don’t know why it’s brittle
@stevenfetterman916
Жыл бұрын
@@customlurepainter I just did another batch of 6, this time I was more careful with the 1 to 1 ratio, and I added some glitter to the epoxy... Will give it 2 days and see how it turns out.
@sallysterling2612
Жыл бұрын
Could you tell me what kind of lamps did you use for for box.
@customlurepainter
Жыл бұрын
I got my on Amazon 100watt 256nm
@laserdoc85
5 ай бұрын
Do you always brush it on instead of dipping?
@customlurepainter
5 ай бұрын
Yes, dipping you will waste a lot of materials
@laserdoc85
5 ай бұрын
thanks@@customlurepainter
@stogerogue
Жыл бұрын
Do you happen to have a link for it?
@customlurepainter
Жыл бұрын
I’m not really good at this link stuff, I will work on it for you
Пікірлер: 42