Hey, I just need to say thank you. You have genuinely saved my Aorus Xtreme 1080ti! Since purchase (bought it used locally), the card crashed after about 30 minutes of gameplay. No matter what settings I used, I would get constant crashes. The card worked perfectly fine after using MSI afterburner to slightly underclock (about -50mhz). I came to the conclusion that if I flashed my card to a weaker BIOS, it would permanently fix my issue. I followed all the steps in this video (best one of the sort on KZitem for sure) and flashed my card to the Non-Xtreme version of the Aorus 1080ti. Card is now perfectly stable! You have just earned a new subscriber, my friend. Thanks a lot :)
@markswamy5364
Жыл бұрын
Atta boy.
@markusTegelane
Жыл бұрын
I had a similar problem with a Gigabyte GTX 1650 card and I discovered my issue was the HDMI->VGA converter I was using. For some reason, if you don't power the converter externally and have multiple displays connected, the card hard crashes after about 30 minutes of running any 3D graphics application and sometimes the GPU fans ramp up to 100% as well (and in one case, a fan alarm went off). So, in my case, all I had to do to fix it was to power the converter externally. Before I discovered the solution, I also tried under clocking, which actually worked for a little while, but then the issue came back.
@AjKuzuri
7 ай бұрын
Bro help me save me I need someone to guide me I am totally stuck with a issue
@korruption2802
2 жыл бұрын
This is probably the best tutorial on youtube right now. I got my 2080 FE to flash to the EVGA XC Ultra bios on the first try, now I can go below 40% fan speed!
@xtremeg1dweikx70
Жыл бұрын
I have gpu fan is stuck on 89 - is that fix man ? Plz
@jonathanlilje6869
2 жыл бұрын
Thank you so much for this tutorial. My GTX 760 kept giving driver issues. After changing the BIOS from the Asus stock BIOS to the NVidia standard BIOS, I have no more issues. I am really grateful to you.
@INSANESHOT007
Жыл бұрын
does the driver error occurs on every game you play
@Karel8X
Жыл бұрын
It's refreshing to see someone who not only understands technology, but can also speak coherently. Big thanks and big thumbs up.
@Tayken9127
4 ай бұрын
For those confused about why they're getting a "command not found", type in nvflash64 instead and then the regular -6 .
@Lilrootbeer
2 ай бұрын
🙌🏾
@rhapsodic9061
Ай бұрын
Thank you!
@mukeim
21 күн бұрын
Thank you bro ❤
@sonaldperera
2 жыл бұрын
You made it looks so easy, finally gave me the courage to do the same, great tutorial.
@IgorUsePro1347
2 жыл бұрын
So if you flashed your bios, it didn't work and you can't boot or you boot for a split second before your pc shuts off, here's what you do: Crash your pc multiple times so that it goes into the troubleshooting menu Select command promt Type in DISKPART and hit enter Then type in LIST VOL and hit enter again Find the drive where you installed nvflash Type in EXIT and hit enter Then type in your drive's letter, for me it was C: also no need for \ at the end Now your directory should turn to that drive instead of X: From there you can lookup nvflash directly, or do it just like in this video, and basically do the flash process again using your backup bios ROM. I went through the process of figuring this out so you don't have to in case you nearly brick your gpu, good luck!
@carpelunam
Жыл бұрын
Thanks Man
@indoperfect4080
2 жыл бұрын
thank you, today I flashed my Evga Rtx2080 Super from XC to a FTW3 vbios and went flawlesly thanks to this tutorial. Now the card is smoother and way more stable than before. I'm so happy thanks again
@krystiang3598
2 жыл бұрын
This is probably the best tutorial on youtube right now !! THANKS !!
@randomshittutorials
2 жыл бұрын
What a great tutorial! You're suited for this!!
@happycat0411
2 жыл бұрын
Very good video! I had a friend whose GTX980 BIOS got corrupted. Nice to see that the BIOS can be easily restored or fixed....
@EfeDursun125
2 жыл бұрын
do you fixed it?
@happycat0411
2 жыл бұрын
@@EfeDursun125 Actually no, the problem was a hardware malfunction so the GTX980 card was a write off. It was worth try though.
@moosejesus9526
3 жыл бұрын
Bios flashing can BRICK your card please be careful when doing this. I have had 2x graphic cards bricked due to flashing the incorrect bios. You will not always get the same results as Coil Whine so make sure you compare the different bios's together so you dont brick the card. In this case for the RTX 3060ti I'd stick with the Zotac for now unless you have the technical skills to fix a bricked card if you get that error. Bios bricking is not covered under warranty!!
@710rcr
2 жыл бұрын
Even if you pack up the original bios?
@rapa624
2 жыл бұрын
@@710rcr if it was bricked but you havent change it..
@fanban2926
2 жыл бұрын
@@710rcr of course. You can't flash it back if it's bricked.
@clagonova
2 жыл бұрын
How do we know which one to dl?
@MCgranat999
2 жыл бұрын
@@fanban2926 well, not this way at least. Sould work with a hardware flasher connected to the bios chip, right?
@BladeAether
Жыл бұрын
I wish you could understand how much I appreciate you. I followed your steps EXACTLY and was able to enable G-Sync on my GTX 1080 MXM from Sager. My card died about a month ago, and was able to snag a new and unused one from Ebay, and was able to enabled G-Sync on the new card. YOU'RE A HERO.
@willardd
Жыл бұрын
I realize this is old now and nobody might ever see this but I MUST voice my appreciation. In the process of getting Re-Size bar to work (with many hurdles, all of which I cleared over the span of ~3 hours) I got stuck on every setting being correct, but nvidia control panel and gpu-z both still showing it as disabled... Finally, after much fucking around, I figured out my 3060ti's VBIOS was not the most recent, but MSI's official software refused to detect a newer version. I found one on the very same site linked here, and followed this process, and everything works flawlessly and re-size (fuckin FINALLY) works! In short, a thousand thank you's!
@CoilWhine
Жыл бұрын
Glad you got it sorted out!
@0000temo
3 жыл бұрын
Best tutorial on yt so far for flashing gpu , nice job
@carpelunam
Жыл бұрын
lmao your the same guy that showed me the very Dell 3060ti that I'm buying. I now go look up how to flash the Vbios and its you again. 😂 Subscribed
@accelerateall9996
7 ай бұрын
If you disable the card from device manager and don't have an onboard gpu isn't the screen going to go black? I am afraid to try this....
@polioarm
Жыл бұрын
bought a used zotac 3090 trinity oc like a month ago.. the dude must have somehow updated to none OC version.. Thank you now its oc version again and i can set power to 110% and overclock.. fps is 10% better now.. Thank you so much... the card get so hot like 85c i order new thermal pads for my card.. cant wait to change them
@PC-TI
Жыл бұрын
Hello friend, could you explain to me, did you buy a trinity OC, which had a normal trinity bios? did you change the vbios to OC again? I bought a 3090 trinity OC, I was thinking of putting a few of the normal ones without OC to keep the board cooler
@EyeOfJanuary
2 жыл бұрын
Understand that you need integrated graphics for this (or a separate GPU.) Disable the primary, and screens go black.. OR use safe mode and disable the gpu there. No driver woes to get you a black screen.
@aaronokolue2096
Жыл бұрын
Thanks!
@karui499
Жыл бұрын
FYI : if the nvflash command doesn't work use command nvflash64
@SIGILYPH1234
2 жыл бұрын
Thank you for the quick and simple tutorial, I successfully flashed my ASUS Turbo RTX 2080TI (which has lower fan speed of 27%) to a PALLIT Dual card, I am now enjoying much better noice levels (especially on idle, which is where most of my issues were)
@pedro.alcatra
Жыл бұрын
My brother. Today I did the exact same thing. I have an Asus Turbo 2080 Ti with +12% Power limit only, you know. I did the same as you did the flash of a Palit with 310w Power limit. And it worked really great. Buuuuttt the fan of my card was very underused. With 100% fan speed being only 2200 RPM, and with the turbo BIOS it went up to 4500rpm without problems..... So I had to put the original BIOS because it simply stopped being Power limited, it started to be thermal limited because The fan is not allowed to run at Max speed. I mean... At the necessary speed. How did your board look? Did the BIOS you used have this problem? How fast are your fans going?
@Thpossamai
Жыл бұрын
I bought an GPU from aliexpress (probably used in mining) and its BIOS was all messed up, was able to put an original BIOS in it, thanks man!
@bigshot6911
3 жыл бұрын
...dude, you have to say it can brick you graphics card, in the begging.. Imagine someone following this step by step and not realizing until after.. I got pretty close because, again what do you I know I'm on KZitem trying to learn this stuff. Phew.. good thing I read @moose jesus commend XD Anyways, I left a like, thanks for the lesson XD!
@ianhpetallo6034
2 жыл бұрын
thanks to this vid I have successfully flashed my gpu bios. bought a 2nd hand 1060 jetstream 6gb and saw a different bios in it I flashed it with the original bios. I searched for this specific vid that I saw couple of months ago. thank you so much!
@alexanderx78
3 ай бұрын
This video is so good it showed me how to actually do it, before this vid i used to take away the gpu from the motherboard and boot into windows with iGPU then use DDU to delete all nvidia drivers and then put the gpu back in the pc and then it would boot for a couple of seconds and i could go into device manager and turn off the gpu driver and eventually flash back to original vbios
@InnoSZN
Жыл бұрын
my gtx 1660 shows up in device manager but it doesn't show up in anything else and i can't upgrade drivers bc it says there is no Nvidia gpu recognized
@JoJoGaminG36
26 күн бұрын
Thank you for this great Tutorial! It sadly didnt saved my RTX 2080TI, it still shows Error 43 but it was a easy to follow and working tutorial, the BIOS flash was successful, even under Windows 11.
@kuuzer
Жыл бұрын
Thank you! Very good tutorial. Finally my 3060ti Ventus3 is controlling the fans properly.
@FudoDrmex
11 ай бұрын
which bios did you use
@avoney3151
3 жыл бұрын
Nice to see the music in the background, great content :D
@CoilWhine
3 жыл бұрын
About time right
@simontoloane571
2 жыл бұрын
HI i get "BIOS reading not supported on this device" when trying to extract the factory BIOS. The reason im trying to flash my BIOS is because I get " error code 43 on my NVIDIA GE force GT 750m Card. i tried everything please help.
@kaiserprestin8404
2 жыл бұрын
same problem
@amirtak9886
Жыл бұрын
Thanks so much for the video. I installed the Asus Strix OC bios on my Strix advanced 2080 ti card and my power limit increased from 313w to 325w, so now I can overclock higher. Thank you soon much now I'm getting 3070ti levels of performance with my card
@osti123
Жыл бұрын
hi, i got the following error message can you help me with that: Checking for matches between display adapter(s) and image(s)... Reading EEPROM (this operation may take up to 30 seconds) WARNING: None of the firmware image compatible PCI Device ID's match the PCI Device ID of the adapter. Adapter PCI Device ID: 2216 Firmware image PCI Device ID: 2206 WARNING: None of the firmware image compatible Board ID's match the Board ID of the adapter. Adapter Board ID: 02D6 Firmware image Board ID: 023F Nothing changed! ERROR: GPU PCI Device ID mismatch. if I try with the other version (NVIDIA NVFlash with Board Id Mismatch Disabled) then i get the following error: ERROR: No NVIDIA display adapters found.
@edsterfish
Жыл бұрын
Same
@saboodxs1618
Жыл бұрын
same can someone help please @Coil Whine
@saboodxs1618
Жыл бұрын
did you find a solution ???? please help
@paulius5017
Күн бұрын
bro i get the exact same thing, have you fixed it?
@Satori-Automotive
Жыл бұрын
Could u make a video on editing the existing bios with the program "maxwell bios tweaker" - or whatever archetecture ur using for this.
@danielkristensen6617
Жыл бұрын
I have the 3080 inno3D Frostbite (watercooled), and it startet to make spontane shot-off for the PC. The standby LED on mobo was still on ?! To restart the PC i first needed to cut the power. (take out the plug from the PSU) But after this guide, i now have a ASUS TUF bios om my inno3D card. Now i can change my powerlimit from 100% to 121% powerlimit, and it even runs cooler !! And with 220mhz extra on the boost :-D Thank you SO MUCH for this exelent guide !! !!
@Yohanyothan
2 жыл бұрын
I have a unique problem. My card is an ASUS card originally sold in Asia. Since the latest Nvidia driver update, it no longer is compatible and drops signal and defaults to the driverless video mode. Every time I boot the computer, I essentially have to reinstall the old drivers for it as it dumps the drivers every time it powers down. It’s the weirdest thing.
@CoilWhine
2 жыл бұрын
what kind of card is it?
@Satori-Automotive
Жыл бұрын
Bro ur genius. THX a ton! With a new bios and new power and core voltage limit u can overclock way higher when using MSI afterburner. But be sure ur PSU is strong enough and ur card is well cooled.
@jarc002
Жыл бұрын
I love you so much, I was actually so desperate to find a way to fix my gpu. Turns out the person who I bought it from had flashed a higher end bios to the card and it was causing so many problems e.g clock to be stuck at a constant 136mhz causing basically any game other than like cs go to run at 5 to 20 fps
@raulgalets
Жыл бұрын
can i flash it without disabling the card? i dont have integrated video
@RomanoBeezyaew
Ай бұрын
Just grab gt210 or another very cheap card for a rainy day :)
@raulgalets
Ай бұрын
@@RomanoBeezyaew yeah thats about it. the deals on xeon withou igpus is good but not having is sometimes bad
@filiplaskovski9993
Жыл бұрын
This is the most informative video on this topic!! Well done Ps are you meant to remove protection in the command prompt ?
@MrSham3less
Жыл бұрын
'nvflash' is not recognized as an internal or external command, operable program or batch file. Edit: had to use "nvflash64" in the second command!
@CoilWhine
Жыл бұрын
Happens to the best of us
@Lumilinda
Жыл бұрын
ty
@ChoppedAndScrewedMusic
2 жыл бұрын
As someone that just Bricked Their GPU and sent it back to ASUS for RMA If you got a warrenty, you're good man. It takes alot more to break a GPU Than You Think. Mine was just Not good from day one, I think bad chips maybe
@ENMPM
2 жыл бұрын
Is it a general rule of thumb to only use VGA BIOSes from other manufacturers that use the same number of fans on their models of the same GPU? I mean like are the fans controlled separately or do all fans get controlled by the same settings so the actual number doesn't really matter? (ofc one should keep the power consumption in mind like in your example) I'm thinking of flashing a FE BIOS on my MSI GTX 1080 Gaming X for downclocking it because it's been running hot lately inspite repasting it.
@jarviz17
2 жыл бұрын
Asus laptops got a damned update of only able to clock upto 300mhz in afterburner and similar apps Was intending to mine ethereum but stuck at 41MH/s stock With ur tutorial i flashed a bios of another similar laptop with rtx3060 115w and same temps but able to clock high Thanks a lot man
@samuelsyrzysko8110
8 ай бұрын
help its says nvflash is not recognized as an internal or external command, opperable program or or batch file, fixed just install the exact same version of nvfkash as shown in the video and it will work
@Slap4s
8 ай бұрын
Same
@MrBubba3494
5 ай бұрын
Did u fix it?
@samuelsyrzysko8110
5 ай бұрын
@@MrBubba3494 yes I updated my comment check it out
@Slap4s
5 ай бұрын
@@MrBubba3494 don’t waste your time. Trust me delete the cache on ur ram and gpu and it will fix ur problem no software needed
@Bischarch
Жыл бұрын
the best tutorial in youtube and google! so easy to follow!
@davehilditch1393
2 жыл бұрын
Thank you for this - I'd downloaded the EVGA X1 Precision Software and it told me there was a VBIOS update available. But this BIOS update really slowed my card down so I wanted to revert - thanks for making a nice clear video. Also, you didn't 'mount' the C drive with the CD command, it was already mounted, you just changed directory, but great guide thanks.
@bradwitt470
Жыл бұрын
What vbios did you put back on your gpu. I did the same thing.
@terrencedoyle5513
Жыл бұрын
thanks for the clear explanation. turned my 2080ti strix oc into a matrix and it runs great!!
@FloppyJesuss
Жыл бұрын
This is not working, and gets stuck on "Checking for matches between display adapters and images" please help!
@aaronrhinelander2739
3 жыл бұрын
What are the card's dimensions? Length, width, thickness. Been looking everywhere to see if the one I have on the way will fit in a Geeek a30.
@CoilWhine
3 жыл бұрын
Ill measure it up later
@CoilWhine
3 жыл бұрын
I had to convert from standard so the are rough (slightly generous measurements) Its about 210mm long by 120mm wide and a bit less than 35mm thick, it is a two slot card and doesnt protrude past the io shield
@aaronrhinelander2739
3 жыл бұрын
@@CoilWhine Nice, thanks. Should fit then.
@berryvr7184
2 жыл бұрын
important question, if i have one gpu that is working normally and another which has a broken VBIOS on it ( so the card doesn't display anymore) can i still use this program to flash the VBIOS back, even when i have two cards still in. ( im trying to fix a card which i flashed but doesn't display anymore, but my cpu doesn't have intergrated graphics, so i can't display through my motherboard) is there an option to choose which gpu is been flashed? cus i don't want to fck up two graphics cards
@CoilWhine
2 жыл бұрын
Yes, Youll have to ask it to list devices then flash the desired one by specifying it in the flash command. I cant remember the exact command offhand though.
@mohammadfarjami6748
2 жыл бұрын
Hey buddy . I want to know about 3060ti LHR . How we can break that lock ? How if we change their bios ? Is it possible? What is your recommendation or advice?
@iNozeee
Жыл бұрын
Hello, I flashed my 3070 gaming x trio to the suprim x bios, everything seems to work but battlefield 2042 dont Start anymore. After flashing back to my original bios it worked again. Any ideas to fix it?
@TheM4rxman
Ай бұрын
I am getting an ID mismatch error when trying this. Does anyone know a way to fix this?
@md.abdulahadfoysal7947
Жыл бұрын
Super and great Tutorial bro. Much appreciated.
@jozsefbujdoso7710
3 ай бұрын
Hi. I tried to do it based on the video, but I ran into an error. What could be the problem? Asus gtx 660ti gd20g ,ERROR: Software write protection enabled, unable to erase EEPROM.
@onederdude
2 жыл бұрын
Can you use nvflash to flash the vbios on a card that doesn't have drivers installed? I got a gtx 980m on my laptop and I can't get modified drivers to install. If I can get the vbios flashed, I might be able to get it working, but I'm not sure if installing the drivers are required first before vbios flashing.
@corndog9482
10 ай бұрын
if Steve from Hardware Unboxed and Shia LaBeouf had a child, you'd be him.
@alejo-5435
7 ай бұрын
help pls! i got this error in CMD and i dont know how to fix : ERROR: GPU PCI Device ID mismatch.
@guillermoz5765
Жыл бұрын
Thanks, Tech Jesus Jr.!
@mexarrinha
3 жыл бұрын
Nice one! Can you always revert to the original bios or there's a chance of bricking the gpu forever? Thks
@CoilWhine
3 жыл бұрын
if it can be flashed (not bricked) you can flash it back
@niclasjns6289
13 күн бұрын
Great turtorial👍 Ran first 1 alt. bios on my 2070S. Then tried another, now only black screen after the reboot. What to do now, no screen, no windows safe mode?
@philistine3260
Жыл бұрын
What if my CPU doesn't have integrated graphics (5600x)? Would disabling the GPU just give me black screen? If yes, any way to flash bios without iGPU?
@eduardomc
Жыл бұрын
No black screen, just run at lower res...
@liukoshao6446
Жыл бұрын
nice video! wanted to flash mmi rtx 3060 ti gaming x trio, with the MSI CENTER program, there is no real problem? or should I do it like you? but obviously selecting the update for my GPU type
@nataliatomanek4719
9 ай бұрын
I have this weird problem with my GPU - the fans keep pulsing up and down if the fan speed is below 60. I've been thinking about flashing the bios, but I'm scared of bricking it. Its 1070 ti 8gb aorus. Any advice on which bios to download?
@ZYZZinVR
3 жыл бұрын
Would you say this would shorten life of a card I plan to use to mining if I went to 110% on Zotac with an open case/ambient cooling? Or is the risk more so in the getting everything setup part. Great video again :) after watching your backplate video I'm also wondering if after a couple months I should pull mine out and check for that thermal pad oil like you had
@CoilWhine
3 жыл бұрын
The memory on my 5700xt only gets hot from mining because its a memory intensive workload, the 3060 ti should be fine long term i think dell just limits it because they have no incentive to let it rip
@TermsAndConditionss
11 ай бұрын
How's the mining going for you ? 😂
@Pandor1on
4 ай бұрын
Soo what would i do if the version im trying to vbios flash to has a different board id and the process is stopped because of it? is there any way to ignore that or would that be a really bad idea?
@voodoovinny7125
2 жыл бұрын
So, how do you turn of protection and flash on a Dell Quadro K4000M when you get this error? "Error: set EPROM protection function failed" and "Falcon reset control is disallowed"?
@krullexneo
Жыл бұрын
I have a MSI RTX 2080 Duke, 3 fans. I flashed it with the EVGA FTW3 Ultra bios. It worked perfectly, I've been running it like that for around 4 months now. But now I'm getting odd crashes, usually when RT is enabled in games, It's also happening with fullscreen videos, KZitem & VLC so far. It's bizzare, the only thing I can think of is the bios flash? Would it be recommended to revert back to the original bios? I have it backed up obv
@shimaarafat7291
Жыл бұрын
how can I return to my orignal bios flash backup, if i try to do the same, it shows error "nvidia Firmware Update Utility has stopped working"
@borone1998
5 ай бұрын
Fun guide ngl. learned alot thanks!
@rev_schubert5289
Жыл бұрын
I have an RTX 3050. It's TDP is 130W and I managed it to make it consume 155W on average in a game called "Assetto Corsa". It even tounched 161W!
@emregocmen9562
Жыл бұрын
Thanks bro finally some1 with a good tutorial
@jsjsjs6198
29 күн бұрын
Worked for my 1060 very good and smiple one ❤❤❤
@Porsche996TT
2 жыл бұрын
Hey there Is it normal if the percentage doesn't go to 100% ? It only goes up to 96% every time but it says update successful.
@CoilWhine
2 жыл бұрын
I think ive been there before and it worked
@Porsche996TT
2 жыл бұрын
@@CoilWhine Thanks 👍
@stealthgamerch
Жыл бұрын
Bro. After reinstalling my default bios for KFA2 RTX 2060 1 CLICK OC. Games not opening, the card working perfectly, games opening, but freezes, keyboard freezes, then it crashing by giving me DirectX error. Help pls!!!
@icetcold3296
2 жыл бұрын
Thank you boss keep up the good work😁
@kevinmoreno8980
Жыл бұрын
I just flashed the Zotac Bios in my Dell RTX 3060Ti but the fans do not stop spinning even configuring it with the msi afterburner, is there any fix for it?
@TheLiveTradingChannel
10 ай бұрын
Possible to flash a weak Quadro BIOS onto a RTX 3050?
@rhapsodic9061
Ай бұрын
Thank you! it worked.
@romainschillemans
6 ай бұрын
Hey guys whenever I I want to flash it’s says « gpu pci device if mismatch » anyone could help ?
@muhammadwahaj11
2 жыл бұрын
I have a gtx 1060 3gb, few days ago I got video scheduler internal error and after that I just get a black screen. My question is if I try to bios flash it would it start working again?
@cemsengul16
2 жыл бұрын
Anyone know how to fix nvlddmkm after vbios cross flash? My GPU is not bricked, I went back to my backup and everything is fine. I liked the extra performance though and would like to stick with the other vbios. Before restoring backup I tried DDU but still got BSOD in a game.
@Camola111
Жыл бұрын
HEy i have a dell gtx 1080 OEM (blower) do you think i can flash it with a MSI model who is Fan edition and with the same video outpout ? Thanks.
@Camola111
Жыл бұрын
EDIT: MSI AERO and EVGA FE don't work, they drop the memory to 405mhz.
@willy8067
Жыл бұрын
Does nonLHR BIOS update can be used for LHR version? Mine is Zotac 3070 OC LHR, they dont have LHR installer (they spcify : This is a vBIOS update only for the particular target model SKU.)
@cocosloan3748
5 ай бұрын
Question ! Can I use same bios - but modify fan curve and save it like that ? (GTX1060 3GB )
@savagemasterYT
Жыл бұрын
It shows 'nvflash' is not recognized as an internal of external command, operable program or batch file.
@MegaIceman82
10 ай бұрын
it does the same to me, is it resolved in the meantime? what did you have to do when you found out? thanks
@williamelliott1293
2 жыл бұрын
I have a dell 3080 non lhr that is glitching and crashing almost immediately under load, no matter the overclocks. Not a driver problem. Would you recommend a bios flash? Reflowing the card?
@CoilWhine
2 жыл бұрын
Id be trying to warranty it if its a 30 series
@williamelliott1293
2 жыл бұрын
@@CoilWhine dell oem I bought off of someone. Without the original alienware, there is no warranty lol
@55claudiu1
6 ай бұрын
What happened if you vbios a laptop gpu and then the vbios got corrupted how do you make it back to its default settings
@drenwww
2 жыл бұрын
hey, i need to flash a gpu in a couple of day, but i'm scared that it could goes wrong as i will flash it from a pc that have already a gpu. At which moment nvflash ask which gpu to flash ? O.o ty
@alexc8287
Жыл бұрын
Hi! I'm waiting for the Gainward 4080 Phantom non GS. I believe they're exactly the same and I feel like I should definitely flash the GS version as soon as it arrives. Am I right?
@nguyengiabao7189
2 жыл бұрын
thank u for the best tutorial my 3060ti Aorus Eagle now become Aorus Eagle OC
@jack_sparrow9636
Жыл бұрын
this fixed my GPU thx man
@thadarkone5087
7 ай бұрын
hey bud been trying to overclock my nvidia quadro m5000 tried with after burner 1st then tried the this and cnt seems to get anything to work !!! plz hlp
@7mdoff
2 ай бұрын
Hello i flash my gpu and i cant see nothing can u help me plz
@razomir376
Жыл бұрын
Best tutorial i ever seen
@floris9004
2 жыл бұрын
I have the same card and use it on a H210i. My card gets hot,up to 90 degrees. Im thinking to use it with a Kraken G12 and Corsair H55 AIO. But I‘m a noob and would destroy the whole thing for sure. I don’t wanna buy another GPU. But it gets so loud and hot. I don’t understand why. Please help
@redkushpurplehaze
2 жыл бұрын
I don't have integrated graphics, what will happen when I disable my GPU in device manager? Won't everything go and stay black then?
@CoilWhine
2 жыл бұрын
Its just the driver it disables, it will come back
@redkushpurplehaze
2 жыл бұрын
@@CoilWhine thanks for answering! I see, great :)
@salamnishellhole2160
Жыл бұрын
hello! i'm trying to flash my Titan Z as it's most likely a sample card before release, as i found it at the dump with a bunch of benchmarking software, and i keep getting this error; NVIDIA Firmware Update Utility (Version 5.792.0) Copyright (C) 1993-2022, NVIDIA Corporation. All rights reserved. Checking for matches between display adapter(s) and image(s)... Reading EEPROM (this operation may take up to 30 seconds) Reading EEPROM (this operation may take up to 30 seconds) No matches found. Results: Index | Match | Flash | Name GeForce GTX TITAN Z (10DE,1001,10DE,1078) S:00, B:03 GeForce GTX TITAN Z (10DE,1001,10DE,1078) S:00, B:04 Nothing changed! how do i fix this? thank you if you do attempt to help! ^^
@mr.sasawat
8 ай бұрын
My laptop has blue screen vga clash it's doesn't shown bios version on GPUz. So does the Vbios can make it work?? thank bro.
@CephasPrashanth
3 жыл бұрын
I'm having trouble flashing bios. I followed the exact same steps, it asks confirmation, if I hit "y" then it just reads the bios version and goes back to command line "c: vflash".
@CoilWhine
3 жыл бұрын
I was having some weird trouble flashing earlier this week but i cant remember what i did to get past it. I think it was nvflash index--1 -6 romname.rom or something like that
@CephasPrashanth
3 жыл бұрын
@@CoilWhine I'm new to this, can you kindly give me the exact line so I can type in cmd, I tried what you just suggested and it said "firmware image filename must have a valid extension". I have even tried protectoff and nothing worked. That's the most information I can find online. Edit- I changed the index number to 0. Again same error, it reads the "current" and "replace with" bios version and then goes back to "c:/nvflash" when I type Y.
Пікірлер: 457