I been looking for a video like this forever. Thank you so much for taking the time to share this information.
@ltshinta
Жыл бұрын
I am honestly amazed you spent so much money trying different solutions. You could have easily solve this using an offset L-bracket like the PLCR56 L-Bracket . This would give you a mounting point for the plate and allow you enough room to use right angle HDMI or USB-C cables.
@francis3963
Жыл бұрын
I encounter the same problem as you. I enjoy shooting in horizonal position,but occasionally turn to vertical. I come across a rig which is very versatile that let you slide your camera from horizontal to vertical. Sorry I forget to take down the brand My solution was - mount a ball-head onto the pan-fluid head. It wasn't great, but it did the job well.(I go online to buy a set of adapter screw* 1/4 inches to 3/8). The last *Z-mount was the best solution on a tight budget.Your video was great.!!
@SuperDaveStuart
2 жыл бұрын
Great help - who would have thought my new Manfrotto camera tripod had NO way to allow vertical shots. I thought I was just extra inept. Now its back to the camera shop for another accessory. Thank you for this video!
@Squiddys
26 күн бұрын
have u tried the atoll ring
@cythardwell3069
2 жыл бұрын
Greetings Jay, excellent video. Love how you shared your thought process! I have spent the last three days trying to cone up with a vertical shooting position for my film and DSLR that did not involve the traditional L bracket. That last suggestions checks all my boxes. New subscriber, hoping you have lots more wisdom to share! Xie Xie ni!
@JayPierstorff
2 жыл бұрын
Thanks Cyt, glad it was helpful to you.
@seleemzid7881
3 жыл бұрын
Thanks Jay, I thought i'm the only one who thought about it, for sure the edelkrone is the one
@Meritxellmartz
Жыл бұрын
I was looking how to set up the rig camera vertically and you explain it and show it so clear. It's the best video I could find with an explanation of it. Thank you so much!
@Ed.McGlasson
Жыл бұрын
Thank Jay for helping me solve this....
@SangHTX
2 жыл бұрын
It took 10 minutes to get to the Small Cage Rig information. The video was extremely slow. I was hoping to get the information needed within 8-10 minutes.
@FrankAguirreVargas
10 ай бұрын
Wow, Your content is amazing, thank you very much
@MariusIhlar
2 жыл бұрын
Ive been looking for a full day. The solution is either a ballhead tripod or the z flex that I just found out about. Thanks
@parallelsunset
4 ай бұрын
Does he ever get to a solution?
@WebbyTechy
3 жыл бұрын
OMG 20 minutes of creating a wheel... Jay, just get L-Shape Bracket for the camera and you can easily switch horizontal and vertical using quick release. Edelkrone at the very end of your video came closer to the solution of the problem... but L-Shape bracket exists and it's cheap.
@JayPierstorff
3 жыл бұрын
You are right. I just couldn't find an L bracket that wouldn't block the video ports (perhaps unique to Sony on positioning). I did come close to the L bracket at 13:00 by using a cage and putting two arca plates on it.
@MariusIhlar
2 жыл бұрын
L brackets are blocking the ports if you mount a baseplate on it. annoying
@petrub27
2 жыл бұрын
l brackets are arca swiss. you need to buy the manfrotto L bracket
@ltshinta
Жыл бұрын
@@JayPierstorff If you need access to the ports why not just use an offset L bracket? Something like "PLSA1T Arca-Swiss Offset L-Bracket for Sony A1 and A7r V" ?
@JayPierstorff
Жыл бұрын
@@ltshinta At least in my setup, the L bracket tilts the camera on the wrong axis. (rotates left and right instead of up and down)
@tech_start
Жыл бұрын
Thanks man
@virtualtourpa
Жыл бұрын
This tripod solves all your problems without the additional Edelkrone purchase...Manfrotto MT190XPRO4. It has that arm that goes horizontal. Right??
@rsmolkin
Жыл бұрын
So that lens collar you can't just loosen it and rotate the lens? It only fits one way? That makes no sense...
@JayPierstorff
Жыл бұрын
Yes, But since i made this video there are two new solutions that would change my mind SmallRig Rotatable Collar Mount Plate for Sony Alpha 7R V/Alpha 7 IV/Alpha 7S III/Alpha 7R IV, for Arca-Type and for Manfrotto RC2 Plate, Supporting Horizontal and Vertical Shooting - 4148 amzn.to/3zOwDbg Silence Corner Atoll S Rotating Collar for Sony and DSLR Mirrorless Cameras amzn.to/3KQ7jrQ
@rsmolkin
Жыл бұрын
@@JayPierstorff thanks, now I just hope they have something like that for Nikon Z... I wish more lenses came with a collar, my 70-200 is great, but I wanna use 105mm and 85mm primes...
@p-r-i-v-a-t-e
8 ай бұрын
its still not a solution for professional cinema rigs weighting over 15-20lbs
@Work_Data_PV
Жыл бұрын
you explained cameras have video and photo abilities but skipped on camera cage explaining? odd line of assumptions :)
@AJCoReTV
Жыл бұрын
How does this compare to the Flexsmart model? $40
@JayPierstorff
Жыл бұрын
I haven't personally looked at the flexsmart, but it looks like it should do the job. The difference between that and the edelkrone, is an extra set of extension legs. See the pic here edelkrone.com/products/flextilt
@AJCoReTV
Жыл бұрын
@@JayPierstorff SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit google that!
@JayPierstorff
Жыл бұрын
@@AJCoReTV Thanks! I have updated the description to add the Smallrig and the ATOLL version.
Пікірлер: 36