Very useful and helpful video. This is exactly the setup on my 2003 Ford Ranger 3.0 L. Thanks
@UrbCrafter
2 жыл бұрын
Thank you bud, helped a lot...
@55msdrake
Жыл бұрын
Great video man I needed that information.
@ephraimcamacho9600
Жыл бұрын
Great info!! Good video too! Thanks!
@dgaytan7
2 жыл бұрын
will that apply for the heater in the winter?
@dustytales5829
2 жыл бұрын
Yes ma’am, the thermostat, when installed correctly, will allow the hot coolant to flow into the heater core and heat up the cab.
@timin770
8 ай бұрын
I have a 2000 Ranger with a 4.0. (Not the original engine). All the videos i see show the thermostat mounted vertically, but on my 4.0 it looks like the upper radiator hose is connected to a horizontally-mounted thermostat housing. Does that sound possible? Maybe the replacement engine I bought was from another year??
@Larcona_
3 ай бұрын
Rangers ran ohv and ohc 4.0s depending on the year, not sure if that's your difference, but it's worth checking.
@slackingoffagain4324
2 жыл бұрын
Bikers and babes👍
@scottregister3561
8 ай бұрын
What is the bolt size of the thermostat housing bolts? I can't seem to find the answer to any of my searches! Also, thanks for the video!
@dustytales5829
8 ай бұрын
I don’t have the Mighty ford Ranger anymore. Nor the service manual. I wish I had that information.
@scottregister3561
8 ай бұрын
@@dustytales5829 no worries my man! I appreciate at least that much information. I'll post it here after I pop the bolts and measure them myself. Thanks!
@scottregister3561
8 ай бұрын
They are M8 x 1.25mm Don't remember the length. Probably 30mm or 35mm
@bobjones37450
Ай бұрын
He literally tells you in the video. 2 bolts. Xx millimeters. Watch the video
@c-dubya988
2 жыл бұрын
Does this apply for 4.0 v6
@dustytales5829
2 жыл бұрын
Yes, the process should be similar.
@thomasbryant7260
8 ай бұрын
It’s the same process for the 4.0
@johnsheldon7716
7 ай бұрын
My 2000 ranger doesn't look like that under the hood at all
Пікірлер: 19