How To Vinyl Stripe Installation on a Motorcycle Tank - Honda CB750 K0 Stripe Decal Guide | Part 32
Here’s what I used:
CB750 K0 Fuel tank stripes decals - ebay.us/XVHa80
Monofil Adhesion Aid - ebay.us/YEvejR
Kapci 2k Fast Dry Primer Grey with Hardener - ebay.us/jkrUlT
Kapci 3k Clear Coat with hardener and thinners - ebay.us/qY5KoZ
Fast 2k Thinners - ebay.us/QTN5ym
Sealey Gold Series 1.4mm Spray Gun - ebay.us/GBnENE
Pressure regulator & Water trap kit - ebay.us/NuqRQU
Painting overalls - ebay.us/6wOdU5
3m Respirator - ebay.us/dVowSb
Sealey .8mm patching gun - ebay.us/76xTBF
Whenever I am playing around with one of my projects, I always try to wear good overalls like these ebay.us/2LOCDG and gloves ebay.us/gcA4XD
In this video, I use some vinyl stickers to put the side stripes on my CB750 K0.
I had already primed, base coated and clear coated the tank. I wasn’t 100% certain of the colour or shape of the stripes on the tank, so I researched online. The best option seemed to be to use vinyl cut decals, although sometimes they are painted on.
There are some guides to the size and shape of the stripes for specific years, but it looks like nearly every bike has something very similar with only the position of the pinstripes and the colours being different.
Before putting the stripes on I wet sanded the whole tank with 1500 grade wet and dry. This also gave me the opportunity to improve a couple of blemishes in the original clear coat :)
I found putting the decals on a little tricky, but using soapy water to enable me to move them around first really helps. I also used a hairdryer to heat the parts of the decal that went over the more complex curves at the front of the tank to make it more flexible.
Before spraying the clear coat over the stickers, I used, Monofil Adhesion Aid, adhesion promoter to give it a better key. This needed to be a very light couple of coats just to mist the decal and surround.
The clear coat was put on with the Sealey patching gun, and a good number of coats were put over the whole tank, leaving a reasonable flash off time in between.
The finished result is very good, I would certainly do the same job again using the same types of decals.
For more helpful how-to guides and restoration project logs, visit our blog: www.spannerrash.com/
As an Amazon Associate, Ebay Partner and Awin Affiliate, we earn a small commission from qualifying purchases. Some of our links are affiliate links, and if you decide to purchase things through them, we earn a small commission. It costs you nothing but helps us to keep the content coming. Thanks for your support!
Негізгі бет Автокөліктер мен көлік құралдары How To Vinyl Stripe Installation on a Motorcycle Tank - Honda CB750 K0 Stripe Decal Guide | Part 32
Пікірлер: 24