Bending those tabs up is basically what holds the dishwasher from popping out when the top rack comes out. Good video, just what I needed. My tabs were not bent up on either bracket on dishwasher that came with the house. Thank you! :)
@captaincrunch8333
4 жыл бұрын
Thanks! Watched the first few seconds to get the orientation right and boom, done! I knew it was something simple but this saved the day.
@TralfazConstruction
Жыл бұрын
New dishwasher was 'installed' under a warranty by a contractor. The installer never set to tabs properly. They were just in the slots, not locked down and the outer part of the tab was secured to the underside of the counter top. Time, vibration and opening and closing the dishwasher door caused the screws/brackets to work loose over an eight month period. I looked everything over and secured everything properly. Having never done this before, i think i did an okay job after seeing this video. I was actually expecting to find something like a 'blind clip' that would lock-in with a satisfying click when pulling the unit forward. I learned that these clips don't work like that. Thank you for this bit of validation. Much appreciated.
@jimvuncannon3558
7 жыл бұрын
Thanks, I was easily able to install the bracket after watching the video!
@appliancepartspros
7 жыл бұрын
Glad the video helped you get the dishwasher fixed!
@galenstaunton1720
7 жыл бұрын
Thank you! Exactly what I was looking for!
@EdMichrina
3 жыл бұрын
When I installed mine a year or so ago. I didn't bend the tab. The bracket became unattached It, was fine Thank you for posting this
@psychodad4634
4 жыл бұрын
Thank you Ron Jeremy! This helped.
@christianvanmatre7620
Жыл бұрын
Thank you sir, this fixed my problems.
@LEXIRAE93
10 ай бұрын
Thanks a bunch ! This was super straight forward and helpful !+
@appliancepartspros
10 ай бұрын
Glad we were able to assist you!
@nwojczak
7 ай бұрын
great details!
@appliancepartspros
7 ай бұрын
Thank you. If there is anything we can help you with in the future please let us know.
@scottle6
4 ай бұрын
Any chance there’s a video out there for installing the brackets on the sides for granite?
@appliancepartspros
4 ай бұрын
We do have a video for how to replace the side mounting brackets. Keep in mind these are general videos to show how to install parts so the installation or part number for your unit may be different. Here is a link to that video: kzitem.info/news/bejne/t56AmJWVq4miooI
@matthewsigmon5846
4 жыл бұрын
Thanks Matt!
@lightotw
6 жыл бұрын
This helped me install my bracket on a new dishwasher from Amana. The instruction guide was really ridiculous. Given the very strange way this is secured, by twisting white metal, it can't be redone or the metal tab snaps off. My bracket tab end was soon completely useless. I reversed the orientation of the bracket, so the tapered end inserted into the slot. Then using pliers I made it wrap around the dishwasher frame part. Now only the lone screw hole is available. In my case, I was able to put long screws in there at a shallow angle so it wouldn't pop through the counter top. Very poor design, but we can live with it. Just note whatever bending you do with this bracket it is a one way street. If you reverse the bend, snap it's gone.
@appliancepartspros
6 жыл бұрын
I'm glad our video was able to help you out! Thank you for that additional information about how the repair went for you.
@ricksanchez6665
2 жыл бұрын
Thank you 👍
@2shredcarvin
3 жыл бұрын
Thanks much!! Good to know!!
@bringerofthedawn5544
3 жыл бұрын
What about granite countertop???
@kristenalmonte1110
4 жыл бұрын
Can the store you buy it from do this or can Whirlpool send someone? I don't want a poor job done by just anyone.
@holby33
7 жыл бұрын
What bracket do you recommend for a new Frigidaire dishwasher installed under a granite countertop?
@appliancepartspros
7 жыл бұрын
I would check the installation guide. Most stone counters are laid over a plywood base that you can screw into. If you do not have that you may have to use the side mount kit.
@michaelhinchey
7 жыл бұрын
it is never that easy to shimmy a dishwasher out of underneath a countertop. usually the power line is just long enough to reach where the circuit connects to the dishwasher. it is relatively an easy fix however
@appliancepartspros
7 жыл бұрын
Hope the video helped you out!
@michaelhinchey
7 жыл бұрын
It did.
@ryanj5753
Жыл бұрын
No one has a wood countertop smh.
@dong5394
7 жыл бұрын
looks like he forgot to unplug the appliance before working on it. look at that hair.
@appliancepartspros
7 жыл бұрын
;-) Hope the video helped you out!
@dong5394
7 жыл бұрын
AppliancePartsPros the video did help me. thanks you!
Пікірлер: 33