Just did my 2017 Silverado, I appreciate the link and the help. I planned on doing it this way but its always nice when someone takes the time to make a video so I know what I am getting into, By the way, works great and was easy, took about an hour for 1st door and 20 minutes on second door, Thanks.
@__ll7__
3 жыл бұрын
Indybowtie glad to hear! Thanks for the feedback!
@sergioalvarez9697
3 жыл бұрын
@@__ll7__ bad ass man appreciate it lots!
@SteamRollersInc
7 ай бұрын
Hey. Just wanted to thank you for this video. I just installed my new tow mirrors on my 2015 gmc Sierra and followed your wiring to a tee and everything works great. So thank you!!
@marceldupree5035
11 ай бұрын
This is how an instructional video should be made. Absolutely perfect, thank you for taking the time to do this.. Absolutely Perfect!!!
@mikenavarro3114
3 жыл бұрын
Awesome video ! Thank you for guiding me through this ! I purchased the terminal/pins and all it took was time ! Anyone can do this don’t be scared just takes time and patience especially putting the wire through the rubber boot and installing the pins !
@__ll7__
3 жыл бұрын
Thank you !!
@kikomarquez8673
3 жыл бұрын
Where did you purchased the terminal pins?
@mikenavarro3114
3 жыл бұрын
@@kikomarquez8673 eBay he has the link in the description
@__ll7__
3 жыл бұрын
@@kikomarquez8673 eBay, the link is in the description
@DesignsbyWolf
2 жыл бұрын
Just did my 2018 Sierra Denali and worked like a charm. Take note that your power mirrors will not work until you reconnect the big plugs to BOTH your doors. If you only have the driver side door put back together and the passenger door is separated don’t stress over one mirror not moving.. you still did it right 😂
@chaseheins7392
Жыл бұрын
Does your Denali have lane keep assist/ warning and does it still function with the upgrade to tow mirrors?
@beantownbred9659
3 жыл бұрын
Just did my 2018 GMC Sierra. Excellent video thanks. On my truck, rather than ground the black wire to the door, I just wired it direct to the connector like the red wire and everything works fine. Many thanks for the link to the terminals.
@__ll7__
3 жыл бұрын
Awesome to hear man! And no problem, don’t know what so many people had trouble finding the link.
@beantownbred9659
3 жыл бұрын
@@__ll7__I was a little anxious so I installed the mirrors and just left the blue and white wires loose until I got the terminals (everything else worked fine). Then just had to pop of the boot and connector between the door and the pillar and pin the 2 wires. The pins made the job sooooo much easier and professional. Thanks again!
@__ll7__
3 жыл бұрын
@@beantownbred9659 I agree man! This is by far the easiest and cleanest way to do it ! Thank you for the feedback! I have lots of truck content coming soon for these trucks other than mirrors lol.
@alfredoalbarado5643
2 жыл бұрын
Appreciate the video brother was laid out perfect. I did end up buying separate wire harness that had the pins and ground piece already attached to wires so skipped that step all around. 2018 Chevy Silverado custom trim.
@miekk
2 жыл бұрын
Thanks for the video! Everything worked out great! I even ran a wire to the mirror and added puddle lights back on. You can terminate the black/white stripe wire to the connector just like you did with the red/yellow. One thing that really helps is to remove the door tether bolt so the door can open just a little bit further for easier access.
@__ll7__
2 жыл бұрын
Thanks for the comment !
@larkenmcrorie3932
Жыл бұрын
@@__ll7__ Hey man so I just wired up some mirrors on my 2018 Silverado and I got everything working except the running/clearance lights. I know it's a blue wire and tried wiring it into the mirrors harness but nothing works. It's in the correct pin on the door. What am I doing wrong? Or should I try tapping into whatever wires the mirror plugs in to? The mirrors only came with one plug and I bought a harness. Thanks
@creolekolbytv1252
3 жыл бұрын
Been searching for a video JUST like this for about 2 weeks now thankfully KZitem recommended it to me eventually when I had given up lol
@__ll7__
3 жыл бұрын
Awesome man I appreciate it! More videos coming soon
@maumau3299
7 ай бұрын
Much helpful, perfect motion picture. Mirrors on my 57 bel air are now fully installed! Thanks for your expertise. You got a big D. Nice grill
@__ll7__
7 ай бұрын
Thanks man nice c0c
@rypes8089
3 жыл бұрын
I have a 2015 silverado lt with tow mirrors without power heated & i purchased a chrome set with power heated mirror. I'm going to follow your steps here. I'll be back
@briann4817
2 жыл бұрын
i was looking everywhere to try to find the pin connector type, thank you very much!!
@__ll7__
2 жыл бұрын
Welcome !
@richgendron9999
8 ай бұрын
Thanks for the detailed info I just bought a 16 previous owner put towing mirrors on but the directionals don’t work and the cargo lights on the mirrors don’t work I am going to take it apart this spring and fallow your instructions.. I will keep you updated.. thanks again 😎👍
@__ll7__
8 ай бұрын
Thank you !
@hunterrwiilson
3 жыл бұрын
Nice work bro! If I was lifted a bit more and had more offset wheels, I would totally run these mirrors. Since I'm leveled and have like -24 offset, I think it would look a bit goofy, just my opinion 🤷🏼♂️
@__ll7__
3 жыл бұрын
Nah makes sense ! But thank you! Trying to get more videos posted soon. In the works.
@robpearcey13
3 жыл бұрын
Thanks for your video I watched it to install my tow mirrors
@alanflores1973
3 жыл бұрын
That is a beautiful looking Sierra
@__ll7__
3 жыл бұрын
Thank you!
@djcombs5553
3 жыл бұрын
Dude thank you , easy deal, you made this a lot stress free , thank you lol
@__ll7__
3 жыл бұрын
Good to hear !!! I’m glad to help. Check out my new video of installing the switchback lenses.
@williamesmith9287
3 жыл бұрын
Thank you for posting this video it was very helpful A note for those that don't have the signal in the mirror along with pins 9 and 11, the signal is pin 41 hope this helps someone :)
@jwitt8271
3 жыл бұрын
Did you just pin up #41 like 9 and 11?
@williamesmith9287
3 жыл бұрын
@@jwitt8271 yes did it just like 9 and 11 and it worked perfectly on my 2015 1500 LT
@Drewster-pi9cu
2 жыл бұрын
You are an absolute king and I owe you a beer. So glad I kept looking through the comments to figure out if I could get the glass blinker working!
@leer125
2 жыл бұрын
The red/yellow wire was pinned on on #41?
@hydrocleanpowerwashing129
4 жыл бұрын
Thanks for this Video!!!
@michaelbean3301
2 жыл бұрын
Thanks. Very helpful for my 2015
@ShaneMcNutt
11 ай бұрын
Thanks for the help man..great video!!
@daltonwilliams6606
2 жыл бұрын
This is a great video. Seeing the obvious mods you've done to your truck is sweet but it would make a cool video if you went around your truck and went into detail about all the mods. My main question is lift size and offset of your wheels (they look like -44).
@__ll7__
2 жыл бұрын
Walk around and detailed mod videos coming soon! -44 wheels ! 8 inch superlift
@daltonwilliams6606
2 жыл бұрын
@@__ll7__ your'e awesome, thanks for the quick reply! liked and subscribed, cant wait for the next video!
@ryanwheeler6368
4 жыл бұрын
Awesome video. Thanks.
@dextergaskin1168
3 жыл бұрын
Great Video!
@Mason-Dain
3 жыл бұрын
Looks awesome bro
@coreybradshaw2508
4 ай бұрын
Is it the same PIN numbers on both the drivers and passenger door harnesses? Great video.
@davide4456
2 жыл бұрын
Great video man. I bought the mirror option that has heating/defrost in them but my truck doesn't seem to have that stock option. Before I screw something up, I figured I would ask you to see if you knew how to wire it to make it work.. for example, is it simply just adding another pin to the harness.
@cstgeorgegreen5761
Ай бұрын
What were the wheel specs/ what lift you running looks so clean
@NastyKiller360
4 жыл бұрын
Great video beautiful truck thanks
@__ll7__
4 жыл бұрын
xFrostSouLx thank you !
@NastyKiller360
4 жыл бұрын
Do you by any chance know the name for the male terminal/pin? I did everything step by step following your video and it came out perfect except i didn’t realice i dont have turn signal on glass, so now i have to pin it. Also the faster i can get it the better is there any way i can go to an store and buy it? I have the driver door panel off and prefer not to put it together and then take it apart again
@__ll7__
4 жыл бұрын
xFrostSouLx the link to those pins are in the description it’s the eBay link, only took a few days to deliver
@juanpabloortiz7512
4 ай бұрын
Hopefully I can get your attention. Four month ago I did that same step as the video. Everything work but unfortunately now on the right side the running light are no working even the brake light and the headlight. You think because I didn’t make a good connection on blue cable it’s stop working?
@XX-pq2ht
4 ай бұрын
Quick question, is there any videos or anything to use on how to get these pins out in the case of you messing up? i tried using the terminal release tool to push the tabs in but it doesnt seem to work at all...
@kenfoy3284
3 жыл бұрын
I did the install and the turn signals on the mirrors don’t work ?? I read I may need to pin # 41?? How would I do that?? Thanks
@__ll7__
3 жыл бұрын
If you didn’t have blinkers in your factory mirrors then yes you will have to pin the red and yellow wire in to pin #41
@kenfoy3284
3 жыл бұрын
@@__ll7__ ok so i did that but only have blinkers working in the mirrors but not the outside ? Any suggestion ?
@__ll7__
3 жыл бұрын
@@kenfoy3284 look at my other video, in order for them to work in the front and be running lights ( switchback function ) you have to run a signal wire inside the mirror from the blinker on glass to the running light. I show how it works in my other video on my channel
@mattcolvin6590
4 ай бұрын
I have a 2015 Silverado wt with no power mirrors just installed tow mirrors with turn signal and heat wondering how I get power
@mickwebs12
2 жыл бұрын
Great video. Thank you very much. My question is do I need to pin the red wire in 41 slot? Another video shows a guy pinning the redwire? You did not do this? You spliced it later. I have a 2018 Silverado LTZ. The current mirrors have turn signal indicators in the glass.
@kodykatzmarek4264
3 ай бұрын
Did everything in video. Only have blinker on in the glass. Wondering what could be wrong.. 2015 denali
@freeway514
2 жыл бұрын
Excellent video. Really appreciate it. I have everything working except the front side blinkers. The mirrors I bought on ebay said they have front side blinkers. Do I have to rewire the inside?
@josephoverstreet5584
3 ай бұрын
Do you know if you have a work truck model, if any of these other functions like the signals will work by doing this?
@brutiusceez
3 ай бұрын
Hi LL7 I just put my passenger side tow mirror on. My vehicle is a 2017 gmc Sierra slt. Stock mirrors had power adjustment power folding and turn signals in glass. Puddle lights also. I bought a pair of sanooer tow mirrors with power adjustment, power folding, running lights in front, and turn signals in mirror. Also has the cargo lights. The turn signals work in mirror, the power folding works, the running lights work as in they turn on but don’t blink when signal is activated. The cargo lights turn on when I press the cargo light in side. The main issue is the power adjustment. It moves vertically but won’t move the mirror horizontally. Any ideas?
@williamday1834
2 жыл бұрын
Just did mine the exact way you did. Front turn. Signals aren’t working but markers are, clearance lights aren’t working either. Going to have to dig into it some more.
@__ll7__
2 жыл бұрын
What year is your truck
@williamday1834
2 жыл бұрын
2015 Denali
@anthonyarnold8530
4 ай бұрын
I’m f my truck is a early 2015 silverado lt with no turn signal on my mirror will this still work or do I need the whole new wiring harness
@miltonespino40
3 жыл бұрын
Nice Truck bro
@z0mgbananas
Жыл бұрын
did the covers come color matched or did you do that yourself
@ryanbehan5192
Ай бұрын
I had power tow mirrors before they were oem and everything worked. I swapped them for smaller power mirrors on the 1500. Now I’m going back to aftermarket tow mirrors. Do I have to wire it all up like this? Or will it be plug and play for full function?
@__ll7__
Ай бұрын
Shouldn't have to do anything if you're going back to the small mirrors, oem so should be plug and play.
@joekeller7184
3 жыл бұрын
Nice truck
@ciscocoronel4915
2 жыл бұрын
Did you have an issue with the running light not staying on it will flash once but won’t stay on
@dgmontoyajr
8 ай бұрын
I'm Replacing my existing tow mirrors with blinkers So I only need to add pins 9 and 11. lf my truck didn't have the cargo or running light feature will it still work by just adding the pins I need to buy pins and I want to button up the door panels now so I want to run the wires for later
@finnxaviercom3096
Ай бұрын
Do they auto extend or manual?
@JuanYRuby1209Marine
Жыл бұрын
I tried this on a 2014 Gmc sierra ltz. But it did not work. I plug everything the same. Only problem is that the cargo light and running lights won't turn on. What could be the problem. I connected 9 and 11 like you say but nothing. Only turn signal work.
@JoseChavez-dk3to
Жыл бұрын
Already connect everything just as the video does not work any light that anything else can be a fucible?
@jerrycarrera2121
3 жыл бұрын
My mirrors didn’t come with wires ? How can I do it ?
@JesusLovesUs10000
2 жыл бұрын
Got mines put on my 17 Sierra Denali yesterday and my power folding don’t work. Also my cargo lights wasn’t hooked up either.
@felipegarcia2419
2 жыл бұрын
What’s your lift size and wheel setup? Looks really good
@fondyhighkid
2 жыл бұрын
I just purchased a set of mirrors. I have a 2018 GMC Sierra denali 1500 with the power fold, blinker, and puddle light as you did. I noticed you have two plugs coming from your mirror. I did order the harness for the running lights and cargo lights. But I only have one plug coming from the mirror and no where for the aftermarket harness to connect. Any info would be helpful. Thank you
@hunterweston3259
Жыл бұрын
I did the pin 41 9 and 11 but only turn signal works the running and reverse does not so I’m not sure what else to do
@dylanclarke473
5 ай бұрын
What is your tire and wheel package ??
@zofiajordan5834
3 жыл бұрын
Thanks dude
@braddad6985
2 жыл бұрын
Pins say out of stock on eBay you know another place to get them? Or another link with same pins?
@JesusMartinez-cl3zz
2 жыл бұрын
Any help on troubleshooting for daytime running white lights in the front. Both Turn signals from both sides works and everything just not the front clearance.
@Joyboy_07
2 жыл бұрын
excellent video! I did everything as you showed but the turn signals don't work, the headlight does but the turn signals don't
@__ll7__
2 жыл бұрын
Did you pin #41 ? Those are for turn signals if your truck previously didn’t have turn signals in mirrors
@Joyboy_07
2 жыл бұрын
@@__ll7__ thank you I did not read the description of the video. they work perfectly 🙏🏻
@crispy2653
Ай бұрын
So I’m going to be doing this on my GFs 2018 Sierra she bought a harness for exactly what you did theoretically should be the same thing you did right?
@__ll7__
Ай бұрын
Yes as long as that harness has the necessary pins used in the video.
@loganteitsma7951
2 жыл бұрын
Do you have to order this harness terminal clips you used? Or is there another way around using those?
@DirtyRascalPimp
2 жыл бұрын
For some reason turn signals stay solid and glass turn signals do nothing. 2015 1500 Silverado LT. Not sure what I did wrong, followed to the T.
@sengvang6204
Жыл бұрын
Great video. What are the pin slot on the driver side door? Much appreciated
@__ll7__
Жыл бұрын
Same ones
@almarazyovan3
3 жыл бұрын
Witch switchback did you use for the tow mirror?? The first or second that you put in the link???
@teddieeddie9219
11 ай бұрын
What size shoes you got on. Tires rims offset? Brand?
@ColtWorks100
6 ай бұрын
Do they shake at all when driving?
@jacobkoppert1750
Жыл бұрын
Hey man. Thanks for the vid. Just wondering what wheels those are. They look good
LL7 thanx for the video. I am looking forward those mostplus tow mirrors manufacturer p# M90714. Out of stock everywhere, do you know if there are any other power fold tow mirrors that would work with your wiring setup? It’s for a 2014 Silverado crew cab came with non power folding Thanx
@alexsamaniego6959
7 ай бұрын
When you say 2015 and up come pre pinned do you mean that the harness is just pretty much plug and play? Or do you still have to run the wires? I only ask cause I may need to buy some pins before I attempt installing. Thanks in advance!
@__ll7__
7 ай бұрын
2015 and up means the pins inside the door jam will be there and you can do exactly what I did in the video. If you have an early model 2500 or 2014 15 and 2500 you'll need an additional "RZY" to add the pins inside the door jam. Hope that helps
@JasonJohnCowart
Ай бұрын
@__ll7__ Curious, it says the turn lights are in pin 41 on the wiring harness. I noticed you just wired it straight into the block. Is that tapping into pin 41?
@__ll7__
27 күн бұрын
Yes you only need to pin #41 if your factory mirrors didn’t have signals on glass
@pierrecrete6293
3 жыл бұрын
Hi I have a SIlverado 2018 work truck, kind of basic version. I just replaced the standard mirrors by a pair of tow mirrors. They come from Galaxy Auto and they have all potential features (flasher, parking, defrost, back led light) , and these guys have no idea of they are doing, they sell and ship and that's it, they can't support the product after sales, no knowledge of wiring at all!! Anyways, Along in the kit was a 4 conductor piece of harness with a square connector at one end. If I want to activate all the features and maybe the power fold, do I have all takes to perform the operation, or do I need a perticular harness?? By the way, I liked your video, very helpfull and no brainer!! keep it up
@__ll7__
3 жыл бұрын
Correct you should have everything you need to wire them like I did in the video. Aside from powerfolding unless the mirrors you bought are powerfolding.
@jonpoole3748
2 ай бұрын
What about the defrost function?
@nickperez5619
2 жыл бұрын
Question for everyone on here …. I also just put tow mirrors on my 2017 duramax … but my ambient temperature sensor which is located on the right passenger mirror is now reading very cold which is causing a check engine code . According to my after market gauge everything is fine . Any suggestions on how to alleviate this issue ?
@jacksonelder8519
2 жыл бұрын
I wired it just like this and my running lights don’t work… any ideas?
@luissanchez-hc6pp
3 жыл бұрын
Thanks
@Longhorn_5.3
2 ай бұрын
I had wired everything up, everything works but the reverse light and running lights on both mirrors. If you have any tips, it would be helpful.
@__ll7__
2 ай бұрын
Sounds like you either didn’t pin the correct terminals or you have a 2014 or early 2015 model that requires an RZY harness on top of this for them to work
@Longhorn_5.3
2 ай бұрын
@@__ll7__ I will have to check my terminals. I have a 2016
@bigdbassn4489
2 жыл бұрын
Thanks for the video, GREAT STUFF! I do not have the power folding mirrors and only 2 buttons on the L R mirror buttons. It looks like you have 3. Do you know if the only mod Id have to make different than your is getting a new button with the 3 options? Thanks.
@__ll7__
2 жыл бұрын
If you want powerfolding all you have to do is get power folding mirrors obviously and replace the switch with the one that has the powerfold button. Boost auto sells them
@jacobcombs2515
Жыл бұрын
What wheels do you have on your truck in this vid, they look great.
@__ll7__
Жыл бұрын
Axe off-road compression forged ax1.0
@JuanGarcia-ls7iu
3 жыл бұрын
No extra wiring needed ?
@__ll7__
3 жыл бұрын
Unless you’re truck didn’t come with signals on the glass you’ll have to pin #41 for those. But if it did nope, just what I showed in the video. The switchbacks are only wired inside the mirror and nothing extra for those either. Another video coming soon for that.
@ericanderson8556
3 жыл бұрын
How would you go to power folding if your truck didn’t come with it. I know you can buy the harness but I assume you can do it without the harness? Great video.
@__ll7__
3 жыл бұрын
You would need the switch that has the power window button, I’ll try and figure out what wire it will be.
@ericanderson8556
3 жыл бұрын
@@__ll7__ Thanks
@bigblaze73
Жыл бұрын
My reverse lights on my mirror doesn’t work but got everything else working
@RASTA9x19
4 ай бұрын
What year and model is this ??
@KingRanchW
3 жыл бұрын
i have tow mirrors on my 2012 and i wanna put the new ones i have a wt so it's literally has no power going to the mirrors i don't even have the signals on the mirrors 😬😬
@Pinky-190
Жыл бұрын
Hi, so i followed this instructions on my 2018 Chevy 1500 LTZ, z71. I had the original side mirror with the power fold, signal on glass, puddle light...option. I bought an aftermarket Mostplus tow mirror with power fold, heated glass, signal of glass and the running light... I then install a dynamic switch blade signal on the aftermarket mirror because i prefer that than the one that came with the aftermarket mirror. However, after installation i only have the power fold, cargo lamp and power adjustable glass. the running light and the signal on glass doesn't work. Did i miss something or do i need any additional harness? I already ran the blue wire to pin 11 and the white one to 9. . Hoping someone here can help me.
@raybowers4657
3 жыл бұрын
Great video. I have a slt model the stock mirrors don't have folding option and lights built it. I think from what you video shows the lights will work with those mirrors but I'm not sure about the folding option. I wonder if I can get that option working
@__ll7__
3 жыл бұрын
You won’t get power fold unless you swap the switch and route the power fold pin as well. If you didn’t have signals in the glass you will also need to pin #41 which is the signal in the glass which also is how your switchbacks get signal. Simply route the red and yellow wire the same way 9 and 11 are done.
@Luke-ew2he
10 ай бұрын
My turn signal on the mirror works but blinks really fast and gives me a light on the dash do you know why?
@user-sj8qe6vm1k
9 ай бұрын
Need to put resistors in because they are led
@isaacperez6587
2 жыл бұрын
Wheel &tire set up
@scottjones9821
2 жыл бұрын
My tow mirrors didn’t come with the extra terminal is there a place I can get it from because this guy didn’t have it
@Alex-be2nb
3 жыл бұрын
Just got some mirrors and they have all the functions, just not the switchback lights, but they didn’t come with the extra red, black, blue and white wires that you’re doing in the video…do i need to get those from somewhere else or are they possibly in the single harness coming from the mirror?
@__ll7__
3 жыл бұрын
Should be able to just trace which wires go to the running lights and cargo lights and just provide you’re own wire and do the same thing
@evantodd7094
3 жыл бұрын
I ordered the same switchbacks and tow mirrors. Is there a good video showing how to connect the switchbacks to these specific tow mirrors? Thanks.
@__ll7__
3 жыл бұрын
Yes actually on the Amazon link it has the video on how they’re wired it’s super simple just gets signal from the glass.
@2021beast
4 жыл бұрын
Nice video, I just changed the mirrors on my 2016 silverado and everything worked except the back up light. But I just hooked it up to the factory harness would that be the problem?
@__ll7__
4 жыл бұрын
Yes, chances are your stock harness does not have the cargo lights in the factory harness just run them into the terminal like in the video. Thanks for the feedback!
@Doniehg
Жыл бұрын
Pin 9 is marker lights Pin 11 is cargo lights
@temosview1725
3 жыл бұрын
Great video. I noticed the switchback lights said they don’t work on aftermarket tow mirrors. Yours are aftermarket right? And they still worked. My mostplus tow mirrors just came with the amber light.
@__ll7__
3 жыл бұрын
Temo’sView yep mine are MOSTPLUS mirrors they work.
@temosview1725
3 жыл бұрын
@@__ll7__ one more question bud. Pin 11 and pin 9 . Are they labeled on there? Or am I supposed to count from top to bottom. ?
@cbausch7025
2 жыл бұрын
@@temosview1725 where the pins into the connector its labeled with numbers that are really tiny
@victorserano9828
Жыл бұрын
Hello need help! I ran everything like you said. Drivers side works but different. Blinker is on running lights not mirror but I wired the same as passenger side mirror. Both wired same but working different. 2016 Chevy Silverado 2500 hd
@__ll7__
Жыл бұрын
Sounds like you need to just swap a few wires on the driver side
@cgenesse1
3 жыл бұрын
I seen the link to the terminals last time I was on here and now do not see them. any chance you could send me that link?
@__ll7__
3 жыл бұрын
Christopher Genesse yea I’ll try to update the description for the links
@ryanwhite2051
3 жыл бұрын
Did you go from the DL3 mirrors to the tow mirrors? If so, did all the wiring harnesses you needed come with the mirrors?
@jwitt8271
3 жыл бұрын
It doesn't sound like it. He's using the small harness wires that came with the mirrors to give power to the front running light and the white "spot" light on the sides. If you want your running light to function as a turn signal and running light, you need to make another modification.
@anthonyarmijo16
2 жыл бұрын
Will this work for WT models
@hightimesify
2 жыл бұрын
Boss man I got the lt trim silverado 2016 and the tow mirrors I did order was pretty much the same but no blinkers and not power fold ...,is it the same procedure is it???
@__ll7__
2 жыл бұрын
Yessir, all you have to do for blinkers is to pin #41 as well for turn signals
@spanky1155
3 жыл бұрын
I installed mine did all the wiring like you do except my pin 41 has a wire in it already and I do not have to mirrors lights so I’m asking do I unplug that pen and put my new one in it is there another option thank you
@__ll7__
3 жыл бұрын
No pin41 is just turn signals, if you have a wire in pin 41 already just do everything exactly as I did in the video
@JoseChavez-dk3to
Жыл бұрын
Red whit red ,black with grand ,blu with 11 , white with 9 ,alright?
Пікірлер: 399