Thanks for taking the time to make this video, just saved me the frustration of working it out with no Instructions 👍
@aaronbuckland4480
13 күн бұрын
Spot on man Nice thank you help me
@poesypoet
5 ай бұрын
This will help lots thanks for the vid I just ordered this and the wiring to the winch was making it difficult to comprehend but I got it now.
@zebtej5813
Жыл бұрын
Watched 3 different videos. Yours got me the results. Thanks sir!
@slaterrockshop4564
Жыл бұрын
Glad it helped!
@tangledline
9 ай бұрын
Thanks man! I needed this a year ago. Now I can dig it out and use.
@dn2988
10 ай бұрын
Thanks for the great video. Its going to save me alot of time...
@FARINEDEMANIOC...
2 ай бұрын
Thank's you very much for all !!!!!!
@weldonesc6217
Жыл бұрын
Great video
@4wheelboogie451
Жыл бұрын
Great Video! Those winches can be tricky
@slaterrockshop4564
Жыл бұрын
That ground symbol will get you mixed up!
@paganhagan
Жыл бұрын
your advice certainly has me grounded now.
@slaterrockshop4564
Жыл бұрын
It's electrifying!
@thorthunder3227
2 ай бұрын
My harbor freight 12,000 pound has three wires ports on top and one ground wire port on the bottom. I could not get my winch to work but was due to an internal wire short in my long wire to my switch from the relay box. Never felt that was the problem until it felt like the relay stuck. Now it is fixed with a new spice of wire.
@Automotiverecoveryuk
2 ай бұрын
U got more details of how u know if u got a internal short and what to do to sort it
@gianlucafiorillo1032
7 ай бұрын
Thanks, that Negative post on solenoid had me very confused. I have the same exact remote kit. Do you know if there is a way I can hook it up to also be able to use the old-style corded control? just in case we lose the remotes, So essentially have the option to use both the cordless remote and the corded remote.
@slaterrockshop4564
7 ай бұрын
I would ditch the old control box with corded remote. If wireless fails you could wire in a backup switch to send power to the yellow or white wire to operate winch
@slaterrockshop4564
7 ай бұрын
You could cut down the corded switch. If it has 3 wires, one should be power, one would hook to the yellow, the other to the white
@atlasoverlandrecovery
4 ай бұрын
Thanks for the video. i'm a bit confused about the additional ground, you mean aside from what you are showing in the video, I need to connect another ground from that black wire, to the vehicles body (ground)? so 1 ground going to the contactor, another 1 going the vehicles body ground?
@slaterrockshop4564
4 ай бұрын
Yes, you need to splice a ground from the body,frame, or battery into that black wire
@atlasoverlandrecovery
4 ай бұрын
@@slaterrockshop4564 Thank you so much!
@atlasoverlandrecovery
4 ай бұрын
@@slaterrockshop4564 do you happen to know a wired remote switch for warn available in amazon now that is compatible for XD9000i?
@slaterrockshop4564
4 ай бұрын
@@atlasoverlandrecovery I do not, sorry
@langstonjones69
9 ай бұрын
I think I'm having same problem that you did. I have black from module going to center spade, yellow and white to the outside spades. So you're saying I need to also add a chassis ground to center spade as well? Thanks in advance.
@slaterrockshop4564
9 ай бұрын
Yes, splice in chassis ground to the small black wire on middle spade
@langstonjones69
9 ай бұрын
@@slaterrockshop4564 awesome thank you!!
@langstonjones69
9 ай бұрын
Worked perfect! I really appreciate you pointing this out in a video.
@briangober2894
Жыл бұрын
Where does the second ground go from the blade terminal on the solenoid
@slaterrockshop4564
Жыл бұрын
You can run it to the frame or the ground on your battery
@byrongray5466
4 ай бұрын
🤙
@thorthunder3227
2 ай бұрын
My middle wire on my relay was hot.
@GreatOutDoorWorldofMines
8 ай бұрын
Stupid questioj where that little ground grounded? to the case?
@slaterrockshop4564
8 ай бұрын
Yes, you could ground the small black wire to case, frame or battery
@Klean_kuts
5 күн бұрын
Where does the antenna wire go
@slaterrockshop4564
5 күн бұрын
@@Klean_kuts it doesn't attach to anything. You can leave it hanging
@itsyoboypayton6827
5 ай бұрын
Can you connect 2 winches to one remote
@slaterrockshop4564
5 ай бұрын
You probably could as long as it doesn't exceed the current rating of the relay
@itsyoboypayton6827
5 ай бұрын
What do you mean by the current rating of relay
@slaterrockshop4564
5 ай бұрын
@itsyoboypayton6827 the relay is rated for 500 amps so as long as your winches don't pull more than 250 amps a piece it should work
@Automotiverecoveryuk
2 ай бұрын
Followed this but all i get is solenoid clicking
@slaterrockshop4564
2 ай бұрын
Make sure you're battery is fully charged
@Automotiverecoveryuk
2 ай бұрын
@slaterrockshop4564 battery is strong and left truck running and still nothing guessing bad ground or positive
Пікірлер: 42