I love to hear that 395 knocking in the background. I got the same setup, great machine
@PaintBoss
4 жыл бұрын
isn't that the greatest set up!! That knocking in the background is music to my ears! stokes you have the same setup! my all time favorite!
@mellinnemeyer8614
4 жыл бұрын
Fave part: 6:55 🤣 Very informational. Thanks for sharing some of the Platinum Futures secrets, Paint Boss!
@PaintBoss
4 жыл бұрын
Why thank you so much☺🤗 I really appreciate the comment ☺ Thanks Mel!
@hilariobaez8028
3 жыл бұрын
Hi! You very professional, very goof tecnic. I have a question. Why you don't prime the bondo, im a painter as well thanks. Saludos from California!
@likon19
Жыл бұрын
Bondo on internal doors ? How about lipping those doors in this way those edges won't crack when you slamit.Nice way to arrange the doors if you put them even closer like nearly edge to edge 90° ,you don't need to worry about overspraying the other side of the door. Good work 👍
@25soloyo
2 жыл бұрын
Did you uses a water base paint??? And the glaze putty no need primer before??? Good video, very useful.
@Here-2-Learn
4 күн бұрын
I used to spray like that until I got the stak raks
@user-zj6qv6bw1v
Жыл бұрын
Did i miss the part of which paint brand you guys use on those doors?
@jamespotter4878
4 жыл бұрын
Very informative, but latex on doors. How do you keep them from sticking in the jambs? I prefer lacquer on all trim including doors
@PaintBoss
4 жыл бұрын
Thank you James, I appreciate the comment! I am with you, I have always been a Laquer man, but this stuff is waterborne and it dries really strong and hard. I have been impressed with it so far, its almost like a hardwood floor sealer, super durable and hard, ill keep working on it and let you know, but so far so good 👍
@FilipinaRose13
Жыл бұрын
Nice work man how do you do your edges before the final coat?
@cynthiabeynun4689
4 жыл бұрын
Wow. That's impressive.
@PaintBoss
4 жыл бұрын
Awesome! Thank you so much 👍, I appreciate the comment 😊
@rumblebeast08
11 ай бұрын
That is my dream garage, haha!
@joseangel4821
2 жыл бұрын
Don't understand why to use an extension on the gun to paint doors
@GilBatesLovesyou
3 жыл бұрын
Here in the Northeast we don't have Southwest Builders. What other SW product would you say it's equivalent to? How hard does it end up drying? Like a latex Proclassic or so?
@morokeiboethia6749
Жыл бұрын
Question - I used oil based primer / paint and even used Penetrol paint additive to paint a door made of I guess MDF and it dried very matty and I wound up putting a lot of sanding time into it to help it look better but the grooves are hard to get all of the matty spots out. I was thinking about a paint sprayer. Do paint sprayers that can handle oil base leave oil based primer/paint very flat on MDF doors or does it still leave a matty finish that requires sanding?
@johncheney6823
8 ай бұрын
Was this a first coat? The first coat can often become matte due to porousness in the MDF or wood. Usually, you want to prime first and seal the pores then paint. Penetrol will add sheen to the finish. Prime and 2 coats for a nice finish. Today's water-born trim paints are a little easier to use and are sandable (Ben Moore, Sherwin Wiliams, Behr).
@fortagband8262
3 жыл бұрын
Was there a reason the extension was removed for the final coat?
@PaintBoss
3 жыл бұрын
No probably not..I feel I have more control of my fan location for overlaps without it, so I probably just took it off for the final...may have been clogging up..lol..I can't really remember to be honest, but usually if I can reach all sides I will shoot final with just the gun! Thank you for the comment 👍🙏
@00dahc
4 жыл бұрын
Seems like the doors are showing a lot of orange peel. What's causing that? Too much paint?
@PaintBoss
4 жыл бұрын
That is Always a concern, honestly on these ones, these doors were pre primed mdf, and they have a certain fuzz to them, not all doors have these but I find that these mdf pressboard doors never really lay completely flat...when we go thin to win, its usually worse so we try to build and sand between coats. thanks for the comment 👍 🙏
@00dahc
4 жыл бұрын
@@PaintBoss Thanks again for reply. I'm learning, so I appreciate it.
@JONO3679
8 ай бұрын
To much orange peel for my taste
@malcolmbaldwin5735
2 жыл бұрын
Bro , you are legit
@jayhari1713
7 ай бұрын
A 310 tip is kind of small for man doors, no? I prefer a 415, or 511. But everyones different. I just feel 310s are for smaller piecs like trim/baseboard
@taskhunters5245
3 жыл бұрын
Good tip.thanks👍
@PaintBoss
3 жыл бұрын
Any time!
@konradderheim9442
4 жыл бұрын
What kind of swivel is on the extension?
@PaintBoss
4 жыл бұрын
I am pretty sure this swivel is made by graco! I will double check tomorrow, thanks for the comment 👍 🙏
@Giokosmik
3 жыл бұрын
This is the Graco Cleanshot, prevents spitting when spraying with extension.
@tsagepainting
3 жыл бұрын
How do you like that 395..is it basically the same thing as the 390?
@PaintBoss
3 жыл бұрын
Yes we really like the 395s... they are a little heavier, but the gallons per minute are more than the 390 so incase you get in a pinch and need to do a bigger job like walls, siding or something bigger, it can work really good for that too. I also have a couple 390s and they work really well, we just keep those running for trim packs, doors, facia, and smaller tip projects ect...thanks for the comment 👍🙏
@tsagepainting
3 жыл бұрын
@@PaintBoss yes , I have the 495 that has been solid for walls ceilings siding etc.. just got a 395 specifically to use only on trim doors and fine finish peices etc.. I will say that for me the 495 has been the best overall sprayer I've owned.. ive had 3 titans and some other units and nothing compares to the quality and longevity of the graco ( at least in my experience) as a fellow painter , I appreciate your work and the time and effort you put into your videos. Maybe someday I won't be so lazy and I'll make some videos showing the world how we paint..
@MrDjsimblex
2 жыл бұрын
Great video. What tip size are you using?
@hectorvalencia6795
Жыл бұрын
You can use 208 FF LP or 210 FF LP
@flip0345
Жыл бұрын
No primer?
@marks4470
Жыл бұрын
When do you do the top and bottom? SMH.
@keithbalke6352
11 ай бұрын
13 passes to shoot a door?……….how about 4-5
@thegoodchad3578
Жыл бұрын
I feel like I can get less orange peel than that with a weeny roller.
@chancedenton1421
3 жыл бұрын
Real painters
@PaintBoss
3 жыл бұрын
Thank you so much 🙏
@taskhunters5245
3 жыл бұрын
Os that Green 517 tip??
@PaintBoss
3 жыл бұрын
So sorry for the delay...I have been fighting the covid and have finally come back up for air! I can't remember on this one, but usually my go to tip for doors is a 310 fine finish or sometimes with bigger 8ft door packs ill do a 412. Thanks so much for the comment`
@taskhunters5245
3 жыл бұрын
@@PaintBoss i have just recovered myself. Was diagnosed positive on the 6-th, now all good. I didnt realy had any symptons. Stay safe my friand. I am looking forward to new videos of yours💪
@PaintBoss
3 жыл бұрын
oh wow! so great to hear you are on the mend! That is wonderful 👏 yes I got it on the 4th of November and am just starting to feel human again...It kicked my butt pretty good, but I think I got it, was getting better and when I went to the Dr to finally get tested, I think I got another strain maybe... my test was positive for covid, sars...I don't know, but I know I am grateful to finally be feeling better and can't wait to get back to work, I have been out since the 4th and am ready to get back in! so glad u recovered and are better, thanks again for the comments 🙏
@XS-ss7go
2 жыл бұрын
Na i pass on that way, to many drips drying out
@fabrigasan2150
2 жыл бұрын
Se parla in inglese la traduzione in inglese a cosa serve?agli imbianchìni sordi ? 😂😂👋🏻
@gabrielx7292
2 жыл бұрын
Bondoing the sides? Nobody listen to this guy he’s one of those spend a month on a job overthinks quality and spends money on unnecessary shxt
Пікірлер: 52