If anything, this time it's a video for those who have just started radio control. I think!
Damper & machine that appeared in this story
OP.1504 Big bore AR damper for buggy (2 front)
www.tamiya.com/japan/products...
OP.1505 Big bore AR damper for buggy (2 rear)
www.tamiya.com/japan/products...
* Spring & damper oil is sold separately for the above products.
VQS (2020) High capacity damper set
www.tamiya.com/japan/products...
OP.1993 TT-02B / DF-03 Aluminum damper set
www.tamiya.com/japan/products...
OP.1028 Aeration oil damper set for buggy
www.tamiya.com/japan/products...
OP.832 DT-02 Spring set
www.tamiya.com/japan/products...
1/10 RC glass hopper
www.tamiya.com/japan/products...
1/10 RC Super Astute (2018)
www.tamiya.com/japan/products...
1/10 RC Egress (2013)
www.tamiya.com/japan/products...
1/10 RC Sandviper
www.tamiya.com/japan/products...
1/10 RC XB Sandviper
www.tamiya.com/japan/products...
Thank you for watching!
This time, it's the story of the "damper," which is also popular as an optional part for the first time!
It's a little effective part, but it's also a deep part that dramatically improves running when properly assembled and matched with the machine!
However, there are quite a lot of types, and I think it's the part that makes me wonder which one is better!
I haven't come up with the answer in this video, but I think you can somehow feel what kind of change it will have by exchanging it. I think!
When choosing a damper or spring
・ Machine weight
・ Tire grip
・ Road surface conditions
・ Lever ratio
・ Diff setting
Relationship with mechanical parts such as
・ Road surface conditions
・ The part that is important in running performance
The relationship with the environmental part such as is also important,
This time, I would like to see the stability and trackability on rough roads without thinking about difficult things! I tried the test with a feeling!
What do you think and what you feel from each movement ...
It's up to the viewers ...
In the latter half of the video, I talked a little about spring rates,
The measured spring rates are as follows!
I hope you will find it useful for future settings!
* The unit is the weight required to shrink gf / mm = 1mm.
Spring attached to aeration damper
・ F: 59.5 / R: 33
Spring with CVA oil damper
(DT02 Sandviper assembly kit accessory)
・ F: 42.5 / R: 38
DT02 Spring Set (Soft)
・ F: 31 / R: 28.5
DT02 Spring Set (Hard)
・ F: 69.75 / R: 67.5
Twitter: / chanyukarc
Instagram: / chanyukarc
#RC model
#RCcar
#shock absorber
Негізгі бет Тәжірибелік нұсқаулар және стиль How will it change by replacing the damper? I made a mysterious machine again. ]Compare with 3 types
Пікірлер: 119