Thanks so much for this clip, great video and awesome pictures, very clear and will help me a great deal in repairing my faulty steering lock.
@PeterFinnTheCarDoctor
Жыл бұрын
Great to hear!
@RattyFlyer
Жыл бұрын
Thank you
@PeterFinnTheCarDoctor
Жыл бұрын
Welcome!
@geojor
6 жыл бұрын
thanks for this ...
@PeterFinnTheCarDoctor
6 жыл бұрын
Thank You for comment. :-)
@RattyFlyer
Жыл бұрын
Maybe unbolt the lock assembly from the column next time
@PeterFinnTheCarDoctor
Жыл бұрын
Noted 👍
@louiscuthair1324
2 жыл бұрын
Awesome video.
@PeterFinnTheCarDoctor
2 жыл бұрын
Thanks!
@TheHokibird
7 ай бұрын
Terve! Anopilla vuoden 2005 Corolla. Ratti jäi pysäköinnin jälkeen jumiin. Se on ikään kuin rattilukossa. Mutta mikään avaimen ja ratin kääntäminen ei vapauta rattia lukosta. Ei vaikka kääntää samaan aikaa eikä silloinkaan, jos kääntää erikseen. Erikoista se että renkaat kääntyneet kuskista katsottuna vasemmalle ehjä 5cm ja ratti silti käÄntynyt 180 astetta. Ideoita?
@PeterFinnTheCarDoctor
7 ай бұрын
Thanks and noted 😊👍
@spencerkaiaokamalie9822
2 жыл бұрын
After cutting the locking cylinder arm, will the steering wheel be free to turn?
@PeterFinnTheCarDoctor
Жыл бұрын
Thanks 👍
@shanemiller6982
Жыл бұрын
Why1 didn't you check the steering after making that cut. Will it turn?
@PeterFinnTheCarDoctor
Жыл бұрын
I have read your post! Good comment. Continue in the same way.👍😀
@julianandrews6025
Жыл бұрын
Theres a chip in yr key which corresponds to yr transponder immobiliser, so on all these videos on youtube people ommit to saying anything about reprogramming the ECU so it will work with different key and ignition assembly. Toyota have been like this for over 30 yrs now.
@PeterFinnTheCarDoctor
Жыл бұрын
I have read your post! Good comment. Continue in the same way.👍😀
@meethekingsomeday4866
Жыл бұрын
I'm having same problem. Wheel locked and won't turn to Acc at all. I pull that white plastic cylinder out and it'll start but steering wheel still locked.
@PeterFinnTheCarDoctor
Жыл бұрын
Thanks 👍
@beausmith08
3 жыл бұрын
is it possible to remove the lock pin so I can drive my car without a key with a remote start?
@PeterFinnTheCarDoctor
3 жыл бұрын
Yes
@AmeriFanPicker
3 жыл бұрын
That accomplished absolutely nothing.
@PeterFinnTheCarDoctor
3 жыл бұрын
👍😂
@AmeriFanPicker
3 жыл бұрын
@@PeterFinnTheCarDoctor fwiw I did manage to get mine back together. I guess your video helped a very tiny bit. I was replacing the switch on the back of the lock cylinder, and I guess my mistake was taking out the key cylinder. Long story short the lock didn’t work so I had to figure out how to get it back together. Basically I pushed the locking mechanism down and then held it down further with a tiny screwdriver held against the side of it in the little gap that exists. Anyhow....
@memeco50
2 жыл бұрын
OK I changed the key cylinder because car would not start. Then I discovered the back wire assembly was out, the screw had come out. Put everything back together back but the steering wheel would lock on acc, on and would be free or unlocked on LOCK. It starts but can't drive it. I just ordered cable/wire part and see if that fixes it. I did try the old cylinder lock and the same thing. If the new wires work, great. But if it doesn't. How can I disable the steering wheel locking mechanism? Hmm I see what might had happened. That back part that looks blue in the video might have switch side. I'll tell you what happens, or grind away those teeth or put a drill bit across when unlocked. It was supposed to be so easy.
@DanielSanchez-fv5ib
2 жыл бұрын
im having the exact same problem, i replaced the lock cylinder and managed to get it to start but the wheel locks on every key position and unlocks when i turn it back to LOCK. Let me know if you managed to fix it and if you did how or what you did?
@memeco50
2 жыл бұрын
@@DanielSanchez-fv5ib Well I have a 1990 Toyota Corolla that is very reliable that I use for Door Dash. 3:20 this guy is showing us how it works. So I went to Home Depot and got me a metal hand saw and starting hacking at it. I was planning to go all the way thru but only took going half way to disable the locking mechanism and Walla! I think you will see small wheel bearing come out. If you have a nice newer car you might not want to do that and do it right. But for my old beater... Still going.
@knotgirly
2 жыл бұрын
At the bottom of the barrel there is a small little tab on a spring that operates the steering wheel lock
@PeterFinnTheCarDoctor
11 ай бұрын
Good point, Thanks Sir 👍
@Titans2138
Ай бұрын
@@DanielSanchez-fv5ib I have the same issue. Car wouldn't start. Took out the locking cylinder. Then realized that I needed a new ignition switch. Put lock cylinder back in the now the steering wheel only locks up when I start the truck. I have to turn the wheel to the right and turn the key back to Lock to free it up. What happened with your situation?
Пікірлер: 31