do you have a video showing how to actually remove manual shift cables and replacing new ones ?
@PeterFinnTheCarDoctor
11 ай бұрын
Noted 👍
@Prijal9648
10 ай бұрын
you found any way for that?
@vasilivanov335
5 жыл бұрын
Hello Peter! Thank you for making this videos. There are very helpful for us. I have this problem with my Toyota Corolla E120, when I change gear from fourth to third or fourth to third it changes smoothly. But when I am on fifth and try to change to fourth I can't. I have to change to third and then to fourth. What do you think for this problem? Thanks a lot!
@StanleyKubick1
3 жыл бұрын
bad synchros between 4 and 5
@yuhannasuccar6741
6 жыл бұрын
Hi what is the name of that part where the selector cable meets the gearbox? The part with the 4 bolts and the rubber sleeve. It is leaking oil on my car. Thanks
@PeterFinnTheCarDoctor
6 жыл бұрын
LEVER, CONTROL SHIFT
@PetarKaramanov
4 ай бұрын
@@PeterFinnTheCarDoctor any chance for you to revisit this question. I also have the same problem and would like more information on how to stop the leak. Or at least what the name of the part is so I can change it myself.
@freedrose5441
3 жыл бұрын
Hello peter my shifter is very stiff in the neutral position but all gears work and shift good but very stiff in neutral position and wont center
@s.a.mproductions1113
3 жыл бұрын
Same here
@hugomartinez5897
2 жыл бұрын
Hi Peter! I am very grateful for your videos. I subscribed! I have some trouble with reverse and now it is popping out of 5th while accelerating. Your video shows the shaft moving to the left for both R and 5, so can the cable be adjusted? I will try Redline oil also
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi, you need a new gearbox. Or inside parts.
@hugomartinez5897
2 жыл бұрын
@@PeterFinnTheCarDoctor Yes, I"m afraid so! I found very little gearbox oil (about 8 ounces!) when I changed it yesterday. Now 3rd gear grinds as it goes in! thank you for your help.
@kmar123456789
2 жыл бұрын
You should make a “ how to replace shit linkage bushing for manual transmissions Corolla 93-97.. i currently need help
@PeterFinnTheCarDoctor
2 жыл бұрын
👍
@anthonyramirez9610
2 жыл бұрын
I'm trying to do the same thing. Peter let us know if we can help your channel in anyway or donations thanks man. Trying to keep my 95 corolla alive.
@ottokivisto5122
2 жыл бұрын
I need help on removing a 1991 4a-fe transmission from the engine, i cant see any bolts holding the trans in place but it doesnt come off… is there some hiding or different types of bolts that are keeping it from moving?
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi, please check both sides.
@moffatk7948
3 жыл бұрын
Hi Peter I have a Toyota Corolla 1.6 2014, at times it does not want to go on 1st and 2nd gear, I thought there was a restriction else where, but checked under gear shifter and gearbox cable connection points and found non. I thought the problem is related to the linkage. What do you think could be the problem. Other gears are fine and easy and the clutch is very soft and smooth.
@copperfoxx2381
2 жыл бұрын
I'm having the same problem my gearstick won't go in first or second you found the problem?
@PeterFinnTheCarDoctor
2 ай бұрын
Thanks for feedback 👍😊
@petervass178
2 жыл бұрын
Hello! I would like to ask for advice. I recently had the transmission replaced in my 1999 Corolla and since then there has been a noise coming from the engine compartment and less power than before. Maybe you have an idea what this could be? Could it happen that the gearbox of a 98 hp engine was installed in the 86 hp engine? I would welcome any comments from you!
@PeterFinnTheCarDoctor
2 жыл бұрын
Yes, it could be possible...
@petervass178
2 жыл бұрын
@@PeterFinnTheCarDoctor Thank you! ...do you think there might be problems with the engine later?
@joesaric1
5 жыл бұрын
Peter what's wrong if it's difficult in the 1. gear and slightly shriveled to 2. gear, the rest gears are fine and going smooth. ? Cable, gearbox oil or the clutch. Yaris 1.3 vvti 2008 year has only 30.000 miles. Thx
@PeterFinnTheCarDoctor
5 жыл бұрын
Maybe synthetic gearbox oil helps ?
@joesaric1
5 жыл бұрын
@@PeterFinnTheCarDoctor I will replace the new clutch set and new gearbox oil Mobil1 Shc 75w-90. I hope it will be good than.
@luchainebord1447
3 жыл бұрын
Hi am putting n 16 valve engine in my Toyota tazz it was n 12 valve do I have to change my gearbox but its also 5speed
@spudypuddy7236
4 жыл бұрын
Hi Peter I change my toyota yaris 2003 had new clutch I change on myself I bleed the system was all right but still have problem into 1 and 2 gear they are hard and sticky sometimes please could you help me with some information Many thanks
@rileyhtn6774
Жыл бұрын
Hi does this work for a 1993 4a-fe corolla manaul as I am trying to tighten up my loose gearstick
@PeterFinnTheCarDoctor
Жыл бұрын
Yes it will
@torhirabader6584
2 жыл бұрын
Hi Peter how do I set linkages for this model, my shifter and linkage at the gearbox don't match
@PeterFinnTheCarDoctor
Жыл бұрын
Noted 👍
@jeffreyberces8005
3 жыл бұрын
Mine has a no probleng on shifting each gear.. But hard to get out only on the 5th and reverse gear.. I mean i can easily insert 5th gear,but so hard to go back on any gears
@PeterFinnTheCarDoctor
7 сағат бұрын
Thanks for sharing 👍😀
@صالحصالح-ي4ج
Ай бұрын
ايش اسمه هذا وكيف اغير المده لانه بيهرب زيت القير هل يوجد فيديو له
@PeterFinnTheCarDoctor
Ай бұрын
Thanks for info. 👍😀
@صالحصالح-ي4ج
Ай бұрын
@@PeterFinnTheCarDoctor كيف يعني مافهمت عليك هل يوجد فيديو ل عصاء الهلال كورلا 2005
@yunusamat5674
6 жыл бұрын
hi.i just want to know why my 4th gear for manual tranm pop up while driving.does seletor cable worn out.
@PeterFinnTheCarDoctor
6 жыл бұрын
Ok, your 4 gear is bad. You need a good used gearbox from car scrapyard
@veteranstance3840
5 жыл бұрын
Hey Peter finn is it possible to fit a c52 transmission to a 2nz fe engine?
@PeterFinnTheCarDoctor
5 жыл бұрын
Hi, if bolts holes fits, it could work
@MarvinxJavier
6 жыл бұрын
when i switch to 3rd gear its like its not sliding properly not smooth as other gears, what could be the problem? there is no abnormal sound, its just it feels like somthing is hindering form it to shift.
@PeterFinnTheCarDoctor
6 жыл бұрын
Hi, your gearbox is worn. It needs new 3rd clutch parts.
@MarvinxJavier
6 жыл бұрын
im having also a whirling sound at 30 kph at 3rd gear, but past that its fine, what do you think is the problem?
@ThembaMoyo-uc4gx
4 ай бұрын
Hw to change the gear links
@PeterFinnTheCarDoctor
3 ай бұрын
Thanks for comment and noted 👍😀
@ThembaMoyo-uc4gx
4 ай бұрын
Video of taking the same car's gear links out of the car and put another ones
@PeterFinnTheCarDoctor
3 ай бұрын
Thanks for comment and noted 👍😀
@jacobphillips1243
5 жыл бұрын
My 95 will only lock into the top gears 1-3-5 the bottom gears 2-4-R don't work at all or lock in place unless I get out of the car and do it under the hood I can't seem to find any information on how to fix this or what the problem even is
@PeterFinnTheCarDoctor
5 жыл бұрын
Ok, your gearbox might be worn out
@blueboykevs
2 жыл бұрын
Hey Jacob, did you ever get around to fixing this issue? I have the same problem in my 2003 Corolla. I would be very grateful if you had any information on how to fix it, thank you
@jacobphillips1243
2 жыл бұрын
@@blueboykevs the shift linkage/cable was worn and just poking out the side when I tried to shift into my down gears, the part was discontinued at Toyota and no aftermarket options I ended up literally fixing it with electrical tape and Souder it was a pain in the a$$ but it worked till the motor give out lasted me a year and half
@blueboykevs
2 жыл бұрын
@@jacobphillips1243 Thank you for taking the time to respond brother I appreciate it. My best guess was the shift cables, but again couldn’t find anything on it. Gonna take a look at it soon, once again thank you very much 🙏
Пікірлер: 69