Thanks for the "how to video". Helps out a lot and you show all the screws that must be removed. The driver side blinker seems to be more of a pain and that's the one I need to change. Thanks for the help, I know what I'll be doing Saturday morning. Great video!
@Rif_Leman
Жыл бұрын
Ditto.😎
@chrischristides
7 жыл бұрын
Thank You Daniel!!, this video you made was exactly what I was looking for!!, Thanks again.., to those reading this, my left hand side turn single was blinking really fast and a bell was ringing every few minutes coming from my dash board...Have a great day !.
@cbonardi65
7 жыл бұрын
You should have put new headlight assemblies in while you had everything apart. I got both sides at RockAuto for $82.
@rogerhuber3133
2 жыл бұрын
Lot of work to just put in a new turn signal! I would probably have replaced them both too.
@redheadsoup
3 ай бұрын
2005 needs the pry method. Watched a different video and when he said 'pry' I thought BS. Watched more videos and he was correct. it has a plastic pry piece where all the other ones said screw.
@assanater601
9 жыл бұрын
Since you're in there you should have made a video on how to clean out the headlights!
@DanielScheerHowTo
9 жыл бұрын
+TranceHD Tried polishing them... looking at some aftermarket halo lights!
@johnathangisseman5100
7 жыл бұрын
hey thank you so much I have a 2004 Dodge Ram 5 9 Cummins turbo diesel that the turn signal light went out today the front one same exact one you're working on very helpful thank you so much!!
@robertgriffith5010
5 жыл бұрын
Don't know what year of dodge you have but my 04 dodge ram 1500 5.7 doesn't have a bolt in the back
@thepenitentcop1033
5 жыл бұрын
yup, i have an 04 no bolt in back either
@1OFGODSOWN
6 жыл бұрын
Would have been nice if you mentioned the size of the socket used for the small nut & what type is under the headlight assembly as well?
@ElSlickVic
4 жыл бұрын
Said 10mm
@BruceOlschewski
Жыл бұрын
Thanks for the idea of keeping the socket on the bolt during the re-install. That will make life so much easier for me! I am replacing both headlight lenses tonight.
@rogerhuber3133
2 жыл бұрын
Thanks for showing me how to replace the bulb but that's TOTALLY insane! Remember when there were 2 screws in the lens and you backed them out, removed and replaced the bulb and put the 2 screws back in? Damn!
@mal13able
2 жыл бұрын
Did you have to remove the front grill first? Is that why I don't see it in the way?
@LongEZ214
6 жыл бұрын
Wow! What a neat video! It turns out that my truck is a 2003 Dodge Ram 2500! Well done my friend!!!
@thermalitorockrattlersrcgr5195
3 жыл бұрын
Thanks man not like your old trucks at all simple and quick so sad I didn't have a clue how to remove the fixture lol
@stevenrobinson7747
6 жыл бұрын
Not good to touch bulb with bare hands, I've had them fog up immediately. Nice video, helped me out, thanks.
@tkeitha
3 жыл бұрын
Thank you I’m a gal and I need to change this. And you walked me through it like a dad 🙏🏾
@GregFriendMI
2 жыл бұрын
I needed the tip on that last 10mm. Thank You
@cliffbrown2566
5 жыл бұрын
Not the same an an 06 2500. I'm trying now and its different.
@CinnamonTwist0204
5 жыл бұрын
Can someone post how to replace side marker bulb on a dodge charger?
@vincemcmillan5380
8 жыл бұрын
Thanks, saved me a bunch of time.
@206click
3 жыл бұрын
Super helpful video, thank you.
@jckelsey
3 жыл бұрын
Awesome help! Thanks and I made $20
@jj3164
3 жыл бұрын
Thank you sir. Saved me a lotta time!!
@jp7147
2 жыл бұрын
Great advice, thank you!
@danheiner7227
4 жыл бұрын
Thanks, I have a 2014 Dodge Ram. The screw locations where correct to my light. Thanks again.
@pamelariggleman3837
3 жыл бұрын
00Q
@elkbrondkbronsmex2795
2 жыл бұрын
👍🏻👍🏻👍🏻
@justinmitchell9385
6 жыл бұрын
I get the lamp out chime on the dash only when the headlights are on, it doesn't do it in the daytime with headlights off. Fast blink at night only...any suggestions? Chime drives me nuts
@DanielScheerHowTo
6 жыл бұрын
Front or rear... replaced the rear with led from all the issues.
@MrSameerkhan51
4 жыл бұрын
Very helpful, appreciate it 👏
@langstonmenefee5788
6 жыл бұрын
You actually have to remove the mud flap
@robertgriffith5010
5 жыл бұрын
No
@stephenhatcher1703
2 жыл бұрын
NICE!! 💪👍
@thepenitentcop1033
5 жыл бұрын
Thank you!!
@armijo729
8 жыл бұрын
bought my ram new 12 years ago and was wondering when your bulb was out did it blink fast...
@DanielScheerHowTo
8 жыл бұрын
I honestly can't recall... they don't go out often. But... I believe that it was blinking fast and that is how I noticed it was out.
@armijo729
8 жыл бұрын
I was just wondering cause l know I have glitch cause my "lamp out is always lit. And l know my blinker is out but anyway thanks the vid was helpful
@pyrofighter1621
8 жыл бұрын
hey Albert im going through the same thing with my 04 ram the driver side turn signal bulb on my truck is blown and it does blink fast
@cooneycre8ive
5 жыл бұрын
Same - 2004 - turn signal blinks fast on the driver side.. license plate bulb out too making it chime - Thanks for the video! 👍
@99sflores
8 жыл бұрын
Thanks buddy, Everyone else had video on how to change a headlight only, sucks that you have to remove the whole assembly which would be a good time to remove the foggy haze on the headlight.
@tonitube400
7 жыл бұрын
Sam Flores
@naturalability3518
7 жыл бұрын
Followed you guide easy peasy thank you!
@LRod50
9 жыл бұрын
How about a video on changing the side marker lights.
@FLANG3265
5 жыл бұрын
You know there's an access panel in the fender well?
@davidreed3357
4 жыл бұрын
Shhhhh. Its funnier to watch mr.goodwrench remove the whole assembly
@Crashking14
4 жыл бұрын
@@davidreed3357 where is it? I need to change the one on the passenger side.
@Al_Rowell
3 жыл бұрын
No there isn't.
@Al_Rowell
3 жыл бұрын
@@Crashking14 on a 2005 2500 there is no access panel.
@Crashking14
3 жыл бұрын
@@Al_Rowell yep I figured that out..but it still didn't take me but about 15 mins...
@pchevelle9653
3 жыл бұрын
Good video, maybe less talking next time. But over all Thanks it did help.
@davidreed3357
4 жыл бұрын
Thanks mr goodwrench. I prefer to just reach in through the access panel and not have to remove the whole assembly.
@stevenw76
4 жыл бұрын
You must have danky small hands if you can reach in there
@davidreed3357
4 жыл бұрын
@@stevenw76 I could palm a basketball as a teenager and can still fit my hand in the access panel on my ram. If I can than most people can.
@thataintnomoonsucka
5 жыл бұрын
This is my new favorite diy channel on YT. Not super difficult, but great explanation. Thank you sir.
Пікірлер: 59