Printer Support 👉 geni.us/BPChannelMember Use This Cleaning Kit For better Results: geni.us/wArXsZT HP 950 PRINTHEAD: geni.us/TAce
@donnavorenkamp1974
2 жыл бұрын
I used a motrin baby syringe and a solution of 50% vinegar and water and it worked like a charm
@thomasjoseph2859
4 жыл бұрын
FYI: I saw another video wherein it cautioned that, when you clean the separate jets, you need to take care not to put too much pressure because each color has a bladder and if you damage it you are screwed.
@skpydogify
5 ай бұрын
I got your kit and extra solution. It is somewhat easy to do, but on my 8600, it was difficult to get the tube attached From another post, I used his waterpik method to pump the fluid on LOWEST setting. I have a 100* setting on my oven, so just dried it in there for a few hours. I do need a new printhead, but am glad I went thru these steps.
@BestPrinters
5 ай бұрын
Glad you have a solution.
@briancamidge3230
Жыл бұрын
Okay scratch my previous comment. This is crazy, but listen to this. I cleaned the print head like I mention previously and but in all new ink cartridges. It kept coming up with printer failure and the issue was the ink system. After several more cleanings and the same result, I got an idea. I took out the new ink cartridges, and put in just one of the old ink cartridges. The printer went back to the main menu screen, which it didn't before, and it saw the cartridge. Then I did that for the rest of the old cartridges, and each time it saw the one added. After I got all of the old ones installed, it went to the main menu, and I was able to print a perfect test page. Tried put ALL of the new ink cartridges in at once and it failed. So, I did the same thing with the new ones that I did with the old ones, one at a time. And now the printer is up and running. Craziest thing I have every seen! Why that worked I have no idea, but whatever....
@BestPrinters
Жыл бұрын
Thank you for sharing this will definitely help others!
@absolutetenacity
4 жыл бұрын
My HP 8600 All-in-One had an error message that said "There is a problem with the printer or ink system." Turning off-on had no effect, but your video fixed the problem! I removed the carriage and ran water through it (did not have any type of syringe or eye dropper; just running water and a small artist's brush). Then I blotted-it-dry with paper towels. Blotting it brought the excess ink through the carriage. Keep blotting until it don't blot no-mo! :-) Dab at the excess water in the unit by twisting the paper towel and dabbing into all the crevices. Put it back together and follow the prompts. In my case, it asked for ALL new ink cartridges. SUCCESS!! thanks for posting this video!
@absolutetenacity
4 жыл бұрын
Additionally, this printer was purchased at a thrift store for ten bucks, and I've been using it for several years. I was willing to take the risk of completely ruining it, because it was "dead" anyway! :-) Works Great now!
@BestPrinters
2 жыл бұрын
Awesome!
@sindocss1
4 жыл бұрын
Thanks for this tip. They said I had a problem with the printer head saying it was not installed properly or damaged. Tried this method and it starts back working!
@BestPrinters
2 жыл бұрын
Lets goooo!
@robertsoto9997
3 жыл бұрын
This was a great video. I bought your cleaning kit from Amazon. Worked like a charm. I think I pushed to hard on the syringe a few times and spit ink everywhere. Not to bad, and printer is working just fine now. Thanks for the video.
@BestPrinters
3 жыл бұрын
Awesome!
@1220life
5 жыл бұрын
Very helpful video! Bought the cleaning kit for my HP8600 and new ink and boom!! Wow! back in business Thank you for this.
@leealice9070
4 жыл бұрын
It worked?
@ultramajik
2 жыл бұрын
Have an HP 8600 that's been sitting around. Had filled the yellow ink at Cxxxxx, and the printer got pissed. Wouldn't work. Sat around for a while (yes, me, too), and I guess the ink dried a bit. Got the printhead cleaning kit, and followed this vid. Bingo. Thank you!
@BestPrinters
2 жыл бұрын
Awesome!
@barbaramuller1973
5 жыл бұрын
I was about to buy a new printer and tried this. Thank you, thank you. You saved me a few bucks.
@BestPrinters
2 жыл бұрын
Awesome!
@schumcreative
Жыл бұрын
Same for me. Almost clicked the "Buy Now" button at HP for a new printer and found this. Works great now.
@raf8593
2 жыл бұрын
You never answer anyone's question below: DO YOU NEED TO TAKE OFF THE GREEN ATTACHED CIRCUIT BOARD ON THE BACK? Before you submerge it in all that liquid? I have an HP 8600 Pro
@BestPrinters
2 жыл бұрын
NO
@captsahil84
5 жыл бұрын
Thank you very much for this video. I was getting the ink system failure Everytime I put a new magenta cartridge in the printer. I cleaned it using your video after ordering the syringe and solution from Ali Express and bang the printer works again. You saved me about 120 $ which the company quoted for a new printhead. Thank you so much !
@willowm94
2 жыл бұрын
Me too. Only with the magenta cartridge!
@BestPrinters
2 жыл бұрын
Glad to hear that!
@trishalberquist
2 жыл бұрын
Thanks for the help! The glove recommendation could have come at the beginning of the video before my hands turned purple, lol.
@BestPrinters
2 жыл бұрын
Glad I could help! Sorry about that
@BarbaraMullarky
7 ай бұрын
Excellent video. Will try the cleaning kit. Good to know that I can still buy a new printhead for this printer since mine is pretty old!
@BestPrinters
7 ай бұрын
Good luck!
@mullarkyp
7 ай бұрын
@@BestPrinters Thanks my print head cleaner kit arrived yesterday and it worked! Thanks for the great information.
@debiestebbins25
2 жыл бұрын
Thank you! Question - I had the print head out and there's an electronic board in back. I didn't see the back of your print head so I don't know if yours was the same. When I'm cleaning each jet, how do I keep the electronic board dry? Another video showed how to remove this board? I'd rather not do that. Can I put plastic over it to protect it?
@BestPrinters
2 жыл бұрын
That won’t be necessary
@AlistairForge1
5 ай бұрын
Thanks. This has worked perfectly for my printer EXCEPT for the yellow. I can't force the solution through the nozzle. It feels completely blocked up. Is there a fix? Or is it time for a new printhead?
@uno23437
6 жыл бұрын
Thanks! This video helped me stay away from this printer type. My last color printer never had issues, just old.
@BestPrinters
6 жыл бұрын
Jason Jones awesome!
@friederikelehrbass135
4 жыл бұрын
IWe ahve a 8610 since 5 years and never had a problem until now. So it is a nice printer...
@Jantampa
5 жыл бұрын
I thought I'd bypass flushing the nozzle and just get a new print head, that is till I realized it cost just as much for a new printer as it does a new head. Sheesh. Looks like I'm buying the cleaner kit.
@BestPrinters
5 жыл бұрын
Yes that is the cheaper option.
@katiedaniels2321
7 ай бұрын
What is the best way to dispose of the ink and cleaner fluid that ends up in the container?
@BestPrinters
7 ай бұрын
Run it down a sink with running warm water, when mixed with water the chemicals are not toxic.
@YT2007XYZ
Жыл бұрын
What is the purpose of the film over the print head ink reservoirs that you are cleaning out (other than the obvious of retaining the ink)? I’m guessing this was HP´s answer to manufacturing a small reservoir. Does it serve any other purpose being a flexible film?
@rocketberger
Жыл бұрын
there's a circuit card on the bottom of the printhead. Won't that get damaged sitting in the old cleaning fluid?
@BestPrinters
Жыл бұрын
As long as it is dried off and allowed 24 hrs to dry totally, there will be no damage. i have done this many times.
@ScottFieldsSWF
3 жыл бұрын
@BestPrinters Just got the cleaning kit for my HP 8600 and the kit and this video helped me tremendously. Thank You!
@BestPrinters
3 жыл бұрын
I’m glad it helped!
@chuckschillingvideos
4 жыл бұрын
What solvent are you using in the cleaning solution?
@user-rg1ys4sz2p
7 ай бұрын
I have a HP ENVY Photo 7858 and have no way to clean my printhead. My issue is my color ink prints just fine but I can't get my black ink to print. Any Ideas?
@BestPrinters
7 ай бұрын
You are in luck, HP Envys dont require printhead cleaning. The solution is easy, just purchase new ink.
@rspeck226
2 жыл бұрын
You have to be careful with circuit boards on the back of the printhead.
@rspeck226
2 жыл бұрын
Do not get them wet.
@BestPrinters
2 жыл бұрын
Yes
@maryjanewalsh8631
Жыл бұрын
how do you remove the circuit board or do you leave them on while you're cleaning it?
@sabeo0106-hi1tm
11 ай бұрын
Right I just burn 2 printer because didn't know that and just following KZitem videos :((😢
@BillieCoxClass
3 жыл бұрын
Try this! Thank you! I have a lot of “sludge” ink come out. However I also have a red chip pop out😳 any suggestions to where it might go?
@garysnook8851
2 жыл бұрын
My HP 8630's front door when opened the printer head will not move to the left so I would be able to change a ink cartridge. Can you please help me out ? thank you.
@BestPrinters
2 жыл бұрын
If it is printing still, unplug it while it is printing a document and the printhead will be free for you to install the ink.
@farabielec
Жыл бұрын
Thanks dear. My printer does't recognize C cartridge, what to do?
@susanvashon4052
Жыл бұрын
my hp 8600 printer prints a printer status report very clearly but when a try to print from the glass or feeder the copy has streaked vertical lines, and the document is barely visible. how can I clean?
@pualynn
2 жыл бұрын
Canon mx922 has two sizes of nozzle. How does your kit handle that? Only one tube size?
@BestPrinters
2 жыл бұрын
The tubing is silicone it stretches to fit.
@dennisbrown4966
2 жыл бұрын
thank you for sharing this video.i did the same process cleaning on my hp 6600.
@BestPrinters
2 жыл бұрын
Great!
@4sugarsweet
4 жыл бұрын
I have this same printer. How did u not damage the chip on the back of the print head when u laid it in the container like that? The cleaner I bought mentioned soaking the print head for 8 hrs prior and to use caution the level wasn’t open high or it could damage the circuits if it got inside. In ur video you just laid it straight on its back right where the microchips are. How did u not damage them?
@BestPrinters
2 жыл бұрын
Its a miracle!
@notsorespectfullyyours5263
6 жыл бұрын
I ain't got time to be doing this at work in my classroom. I don't have the tools for this either. HP printers suck!
@4dsushi217
5 жыл бұрын
-c- so printer sucks bc u dont have time mk
@BestPrinters
5 жыл бұрын
There a plenty of resources in the description for you to purchase to do the repair in your classroom. Better than spending hundreds on a new printer.
@fngonuts
5 жыл бұрын
@@4dsushi217 ...mk...LMAO...
@4dsushi217
5 жыл бұрын
@@fngonuts ...lmao...MK...
@suuuuuuuuuuus
4 жыл бұрын
What is in the syringe??
@ZacVaper
10 ай бұрын
If you have a "Printer Failure" error, the touch screen is dead. I replaced the ink head with a good one, from a working printer; still have "Printer Failure, There is a problem with printer or ink system". I reset by unplugging, 10 times...Tried printing from pc, nothing. Is there a reset button or just the unplug thing?
@BestPrinters
7 ай бұрын
Leave it off for 24 hours.
@LauraHenzeRussell
3 ай бұрын
Can you repost the link for cleaning kit solution and syringe if you still sell it?
@BestPrinters
3 ай бұрын
Here it is : geni.us/wArXsZT
@standardnerd9840
2 жыл бұрын
I want to save my 8600 but the magenta just won't clear. I can flow the cleaning solution through all the other colors except magenta - the syringe will just not budge. Any suggestions?
@BestPrinters
2 жыл бұрын
Yes try warming up the solution and then try applying it once warmed.
@standardnerd9840
2 жыл бұрын
@@BestPrinters I'll give it a try tonight. Thanks!
@abiegala
5 жыл бұрын
Great Movie, very useful, thanks a lot for taking the time to create and publish it.
@BestPrinters
2 жыл бұрын
Absolutely.
@tripjet999
2 жыл бұрын
"Movie"?
@Greg_Knight
2 жыл бұрын
Great tip! Unless you are in a hurry and don't have the kit.
@BestPrinters
2 жыл бұрын
It delivers with Amazon prime! Next day cant get faster.
@dorisford6898
Жыл бұрын
my hp 8600 is reading a code missing or failed printhead error code: OXC 19a0040 what do you recommend I do to fix it ?
@BestPrinters
Жыл бұрын
I would honestly just replace the printhead. That code is rarely fixable.
@georgemichaelides1694
Жыл бұрын
Is it really necessary to buy OEM HP ink four-wheel third-party ink work
@BestPrinters
Жыл бұрын
More potential for error codes
@wilkovandalen711
4 жыл бұрын
Were did all the water stay in the printhead ? so the first 100 pages are all printed with water !!
@dalevermurlen7089
11 ай бұрын
I had the procedure going good until I broke off the black nozzle inside my tubing.
@papapnd
8 ай бұрын
Thank you so much, you're a lifesaver!!
@BestPrinters
7 ай бұрын
of course!
@dwaynebennett1931
2 жыл бұрын
What fluid did u put in the syringe?
@BestPrinters
2 жыл бұрын
Cleaning fluid from the cleaning kit in the description.
@hagosto
4 жыл бұрын
what about the ink that gets onto electronic green pad underneath
@Secret20Chris
4 жыл бұрын
Thanks for the video, does anyone know what size the internal diameter of the clear tube is?
@cesararh459
5 жыл бұрын
Buen día srs. Tengo una Hp 8600 Pro, con cartuchos originales, y en pantalla tiene un mensaje "error con la impresora o sistema de tinta. apague y reinicie la impresora" Cuál puede ser la solución a ese error? Gracias
@BestPrinters
5 жыл бұрын
Si usted usa las instructiones en el video, probablemente le puede ayudar con su problema pero no le puedo jurar. Si continua la problema es tiempo de comprar una impressora nueva. Y puede usar mi sita, bestprinterstech.com.
@garygoodman5489
3 жыл бұрын
I take it this will work on a HP8500 A910?
@louisgreenberg5384
7 ай бұрын
Should tell people not to push to hard on the syringe due to you, might blow out the diaphragm
@BestPrinters
7 ай бұрын
Thank you for mentioning it.
@henghuashen8291
2 жыл бұрын
Thank you so much! I used your method. It works!
@BestPrinters
2 жыл бұрын
Glad it helped! Consider subscribing to my channel
@kurtatkinson2299
4 жыл бұрын
Awesome job. This was VERY helpful. I'm going to give this a try. Thank you
@leealice9070
4 жыл бұрын
Did this work
@bigwaterrescue
6 жыл бұрын
The link you provided specifically stats it doesn't work with the 8000 series printers. Do you have another recommendation?
@BestPrinters
6 жыл бұрын
Hello, yes if you are referring to the printhead here is the link: amzn.to/2LcrCy2
@bigwaterrescue
6 жыл бұрын
Sorry...i should have been specific. the Printhead Cleaning Kit link on Amazon says it's not compatible with these series of printers. "NOT COMPATIBLE WITH THE OFFICEJET PRO 8xxx SERIES e.g. 8600 NOT COMPATIBLE WITH PRINTERS THAT ACCEPT CARTRIDGES INTO THE FRONT OF THE PRINTER" Seems like a pretty universal solution so surprised it stats its not for front loading printers. Thank you for your video however. Very informative. Are there any micro components on the print head that can be damaged by handling? I know the ink cartridges are very sensitive.
@BestPrinters
6 жыл бұрын
The reason it is not compatible is the way the print-head is set up on the 8000 models. Your only real solution is buying new print-heads, or cleaning the current ones, which I dont have a video on yet. I have never damaged or had issues dealing with these print-heads so as long as you are being reasonable with your handling they should be fine.
@bigwaterrescue
6 жыл бұрын
thanks. fortunately I can expense a new print head to my company so I'm just going with the easy route.
@christendaniel2247
6 жыл бұрын
So are you saying that even though the flush system says its not compatible, your method of cleaning shown in the video will work?
@rakeshparmar7834
5 жыл бұрын
hp 276dw officejet ...same process work this model head?
@suedavis4467
Жыл бұрын
❤❤wow my first time ever knowing this ty 🥰👍🏾
@BestPrinters
Жыл бұрын
Welco!
@coffeeattack
3 жыл бұрын
What if it doesn't accept my new printhead.
@BestPrinters
3 жыл бұрын
You can return the printhead hopefully.
@IamBrian369
Ай бұрын
Thank you😊
@BestPrinters
Ай бұрын
You're very welcome!
@anapierre1719
2 жыл бұрын
Great video, very informative! Thank you!
@BestPrinters
2 жыл бұрын
My pleasure!
@CraigForbes1
5 жыл бұрын
Good vid. I just got the failure message last night. FYI: Your printhead link is dead.
@BestPrinters
5 жыл бұрын
Thank you for letting me know here is a new link: amzn.to/2DwTvB8
@friederikelehrbass135
4 жыл бұрын
The printhead is way to expensive. Add another 50$ and you get a new printer....
@bonniedacosta6385
2 жыл бұрын
no I just tried it
@CharlottePierce
6 жыл бұрын
What is the cleaning solution made of? I have some allergies.
@bonniedacosta6385
2 жыл бұрын
that's too bad
@adamhawk5938
Жыл бұрын
Where’s the link for the kit?
@BestPrinters
Жыл бұрын
Here, geni.us/wArXsZT
@maryamerritt5525
3 жыл бұрын
Thank you, very helpful information
@tripjet999
2 жыл бұрын
Tip: Wear disposable gloves!
@DEshav2b
6 жыл бұрын
Thank you, well done video. I will check out your links and your web site.
@BestPrinters
5 жыл бұрын
Glad to hear that! If you or anyone reading this would like to donate $1-$5 to support the channel It would be very much appreciated, thank you. Click Here: paypal.me/BestPrinters
@bethwall
4 жыл бұрын
HP ink is expensive, so why do the non HP compatables have problems ? I never had problems until now buying from amazon
@lindaf3851
3 жыл бұрын
Buy from LD Products, I never have problem with there ink cartridges.
@mongooserider2000
3 жыл бұрын
I have bought from several different vendors on Ebay and never had a bit of trouble with their replacement cartridges, depending on your model number you may be having trouble because of HP's dynamic security measures implemented in the last couple of years , do a Google search on that and it will explain what they did and where to find the software on the HP site to bypass it.....
@tripjet999
2 жыл бұрын
@@lindaf3851 "their"
@josephgardella1549
3 жыл бұрын
great instructions
@tomfuller4205
Жыл бұрын
Thanks!
@kellyhered791
5 жыл бұрын
What size syringe and tube are you using?
@BestPrinters
5 жыл бұрын
Its a 10 ml syringe and the smaller the tube in width the better. This is the syringe kit I use: amzn.to/2wN28l1
@pammiecakes40
3 жыл бұрын
@@BestPrinters This Amazon link says its NOT good for the HP Pro or 8xxx series AND you're actually working on a Pro 8600. Anything better?
@nugget9245
2 жыл бұрын
This has electronic components. I can't understand how you can completely immerse that in any liquid. Really? Even if it is alcohol. Please explain. You don't show the electronics on the printer head on the other side.
@BestPrinters
2 жыл бұрын
The only part being filled with the cleaning solution is where the ink flows through.
@bonniedacosta6385
2 жыл бұрын
you saved me $1145
@BestPrinters
2 жыл бұрын
I am so glad to hear that! You can show your support with Super Thanks under the video title!
@bonniedacosta6385
2 жыл бұрын
very helpful :)
@BestPrinters
2 жыл бұрын
Glad it was helpful!
@westvalley411
2 жыл бұрын
selling too much...unless empty, unusual for ink cartridges to fail. Can try old before buying new.
@BestPrinters
2 жыл бұрын
Sorry I wasn’t able to get to you message. Please create a new comment with the same question if you still need a response. Thank you!
@eyygurke6081
Жыл бұрын
This is a really good printer kzitem.infoUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 . The reason I gave 4 stars for tech support (which I don't think this would classify as tech support) is because once you turn the printer on, it does require a little bit of start up time which may bother some who are in a hurry to quickly print something. To offset that though the printer prints very quickly. I would definitely purchase this printer again.
Пікірлер: 151